S4 mini GT-i9195 (LTE?)

JustMe801 · Jun 29, 2017

So this is my first Thread and i am sorry if this exists already,

The Battery was half drained and i was in the middle of a Youtube Video (normal vid).

My S4 mini:
Normal Boot? -Nah, Bootloop:angel:
Download Mode? - Hm, ye ok here u go m8: Write Protection: Enable

Recovery Mode? - Uh, ok.

My Phone shut off just randomly somewhere and when i tried to boot it up again it got the Bootloop. Vibrates -> White Samsung Logo (Top left Corner is the Set Warranty Bit: Kernel) I got Lineage OS 14 on it -> Reboot.

Download Mode is likely normal:
Odin Mode
bla bla
CSB-Config-LSB: 0x30
Bootloader AP SWREV: 2
Write Protection: Enable

Recovery Mode (CWM 6.anything i think 0.7):
Everythign works like Show Log, ADB, Key Test, Mounts and Storage
BUT
Wipe Cache / dalvik Cache and Wipe Data/factory Reset just let the Phone wait with the backround and then reboot to NORMAL bootloop.

I tried to Flash Firmware with Odin 3.10.7
then with ROM and PIT
then with ROM and PIT + Re. Partition checked. NOTHING changed sadly

I think it has to do something with the Write Protection Enabled.

Odin? - Oh... ye, heres more:

the Log of last Flash attempt:

<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> sbl2.mbn
<ID:0/006> sbl3.mbn
<ID:0/006> rpm.mbn
<ID:0/006> tz.mbn
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006> NON-HLOS.bin
<ID:0/006> cache.img.ext4
<ID:0/006> hidden.img.ext4
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Removed!!
<ID:0/006> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/006> Added!!

After this the Device didnt Change.
Is there a way to make it Change or a solution?

Like.... ADB? to make it disable the Write Protection or install it directly?

------------------------
Btw:

The Device Outputs this under "Show Log" at CWM v.6.0.7:

CWM-based Recovery v6.0.5.1
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
persist.audio.vr.enable=false
persist.audio.fluence.mode=endfire
persist.audio.handset.mic=digital
persist.audio.lowlatency.rec=false
persist.debug.wfd.enable=1
persist.radio.fill.eons=1
persist.radio.prefer_spn=0
persist.radio.add_power_save=1
persist.timed.enable=true
persist.fuse_sdcard=true
service.adb.root=1
keyguard.no_require_sim=true
recovery.perf.mode=0
telephony.lteOnGsmDevice=1

I:Checking for extendedcommand...
I:Skipping execution of extendedcommand. file not found...
I:Cannot load Volume /misc
Return to menu with any key.

Edit:
Does anyone have BL,AP,CP and CSC for the GT-i9195? (links?

)

In backround of CWM theres also a Grenn Droid opened with a red triangle ("!").

JustMe801 · Jun 30, 2017

No answers?

its just a lil barrier and i dunno how to break it

IronRoo · Jul 3, 2017 at 10:11 AM

JustMe801 said:
No answers?
its just a lil barrier and i dunno how to break it

had you been watching videos for a long time ie was the phone very hot? Possibly then some sort of hardware failure (not that you need excessive heat for a failure)

But if not hardware then possibly you could try the nand erase all command in Odin, but you must flash a full version of stock with pit file at the same time & have all the correct boxes ticked. Else it's hard to recover ...... but you have that already! It's considered advanced so please read up on it fully and don't blame me for any problems, it's at your own risk.

JustMe801 · Jun 29, 2017 3 0 0

IronRoo said:
had you been watching videos for a long time ie was the phone very hot? Possibly then some sort of hardware failure (not that you need excessive heat for a failure)

But if not hardware then possibly you could try the nand erase all command in Odin, but you must flash a full version of stock with pit file at the same time & have all the correct boxes ticked. Else it's hard to recover ...... but you have that already! It's considered advanced so please read up on it fully and don't blame me for any problems, it's at your own risk.

I'll give it a try! Thanks ^^

mad_g · Oct 5, 2017 at 3:26 PM

JustMe801 said:
So this is my first Thread and i am sorry if this exists already,

Does anyone have BL,AP,CP and CSC for the GT-i9195? (links? )

In backround of CWM theres also a Grenn Droid opened with a red triangle ("!").

Here can find all files you need!! Can solve the problem? Have same!!

https://forum.xda-developers.com/showthread.php?t=2751224

pathakarjun2010 · Dec 19, 2016 14 0 0

JustMe801 said:
So this is my first Thread and i am sorry if this exists already,

The Battery was half drained and i was in the middle of a Youtube Video (normal vid).

My S4 mini:
Normal Boot? -Nah, Bootloop:angel:
Download Mode? - Hm, ye ok here u go m8: Write Protection: Enable
Recovery Mode? - Uh, ok.

My Phone shut off just randomly somewhere and when i tried to boot it up again it got the Bootloop. Vibrates -> White Samsung Logo (Top left Corner is the Set Warranty Bit: Kernel) I got Lineage OS 14 on it -> Reboot.

Download Mode is likely normal:
Odin Mode
bla bla
CSB-Config-LSB: 0x30
Bootloader AP SWREV: 2
Write Protection: Enable

Recovery Mode (CWM 6.anything i think 0.7):
Everythign works like Show Log, ADB, Key Test, Mounts and Storage
BUT
Wipe Cache / dalvik Cache and Wipe Data/factory Reset just let the Phone wait with the backround and then reboot to NORMAL bootloop.

I tried to Flash Firmware with Odin 3.10.7
then with ROM and PIT
then with ROM and PIT + Re. Partition checked. NOTHING changed sadly

I think it has to do something with the Write Protection Enabled.

Odin? - Oh... ye, heres more:

the Log of last Flash attempt:

<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> sbl2.mbn
<ID:0/006> sbl3.mbn
<ID:0/006> rpm.mbn
<ID:0/006> tz.mbn
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006> NON-HLOS.bin
<ID:0/006> cache.img.ext4
<ID:0/006> hidden.img.ext4
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Removed!!
<ID:0/006> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/006> Added!!

After this the Device didnt Change.
Is there a way to make it Change or a solution?

Like.... ADB? to make it disable the Write Protection or install it directly?

------------------------
Btw:

The Device Outputs this under "Show Log" at CWM v.6.0.7:

CWM-based Recovery v6.0.5.1
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
persist.audio.vr.enable=false
persist.audio.fluence.mode=endfire
persist.audio.handset.mic=digital
persist.audio.lowlatency.rec=false
persist.debug.wfd.enable=1
persist.radio.fill.eons=1
persist.radio.prefer_spn=0
persist.radio.add_power_save=1
persist.timed.enable=true
persist.fuse_sdcard=true
service.adb.root=1
keyguard.no_require_sim=true
recovery.perf.mode=0
telephony.lteOnGsmDevice=1

I:Checking for extendedcommand...
I:Skipping execution of extendedcommand. file not found...
I:Cannot load Volume /misc
Return to menu with any key.

Edit:
Does anyone have BL,AP,CP and CSC for the GT-i9195? (links? )

In backround of CWM theres also a Grenn Droid opened with a red triangle ("!").

Have you solved this problem.? I have same problem and would really appreciate your help.

Robert O · Jan 10, 2018 2 0 0

JustMe801

pathakarjun2010 said:
Have you solved this problem.? I have same problem and would really appreciate your help.

I really don't know .
But you might try to turn off/switch off/unable "talk back".

xbtz · Oct 18, 2008 43 2 28

your phone has sudden death!

Top Devices

New Devices

Topics

Search

S4 mini GT-i9195 (LTE?)

JustMe801

New member

JustMe801

New member

IronRoo

Senior Member

JustMe801

New member

mad_g

Member

pathakarjun2010

Member

Robert O

New member

xbtz

Member

New posts