[S905W] atvX v4 - AndroidTV 9.0

[zulu br]

Olá...

Eu mostrei este firmware personalizado na minha caixa de tv tanix porque as roms de estoque funcionam muito mal depois de ficar em espera por um tempo (internet wi-fi e ethernet lenta)

Fiz uma redefinição de fábrica primeiro (firmware padrão) e o Wifi não pode ligar agora, então tentei uma rom personalizada e instalei o atvx 4.

Wifi ainda não funciona ... vi que o atvx não suporta alguns chips wi-fi, o que posso fazer?

Minha caixa de TV é:

Tx3 mini-a
TX3MINI-MK95V216
2 + 16G (WIFI RTL8723AS)
10030 20201020 <--- acho que é a versão construída

A placa-mãe imprimiu:

CS_905W_TX_2C_N_MK_V1.6
20200826

Qualquer ajuda seria apreciada

estou com o mesmo problema, essa tv box tem o visor verde né ?

 

[orzechszek]

Hi,

Can you add drivers for Mxq pro+ with rtl8703bs wifi chipset? (In attachment). For now it doesn't show any wifi networks.
Is it possible to skip wifi recognition during configuration? Because I'm not able to restart it from main dashboard into USB mode.

 

[mlcattini]

estou com o mesmo problema, essa tv box tem o visor verde né ?

Usa um adaptador usb, o foda é que comprei um 5.0 pra pegar velocidades melhores mas n rolou, ele reconhece poucos. melhor procurar algum com um chip realtek antigo

Hi,

Can you add drivers for Mxq pro+ with rtl8703bs wifi chipset? (In attachment). For now it doesn't show any wifi networks.
Is it possible to skip wifi recognition during configuration? Because I'm not able to restart it from main dashboard into USB mode.

Can you get the drivers from other chipsets? This is a repost, the actual developer works on this forum:

[ROM] atvX v4 - AndroidTV 9.0 (S905W) - atvXperience : The Forum

Also use a cable to get past the setup screen then use a usb dongle or something to get wifi...

 

[orzechszek]

[ROM] atvX v4 - AndroidTV 9.0 (S905W) - atvXperience : The Forum

It seems you put wrong url to dev site.

 

[leo025]

Hi my friends. Please I need your help. I have a box TX3 mini (S905W) with 2GB RAM / 16GB internal. The board is blue (maybe clone/generic) and was release on march 2019. I tried to load this amazing firmware but It was impossible, stops after 7% with error " [0x32030201]Uboot/Get result/DiskInitial error". The only firmware that I could install was AndroidTV_7_S905W_Bluetooth_Tue_Minh_20190320.zip from a vietnamese website HERE.

Is there anything else that I can do for install atvXv4 ROM or another ATV9 rom? And how?
Thanks in advance.

 

[mlcattini]

The link is correct though, problem is, the website has been shutdown for a couple of weeks now =(

Even the forums are out https://forum.atvxperience.com/

 

[mlcattini]

Hi my friends. Please I need your help. I have a box TX3 mini (S905W) with 2GB RAM / 16GB internal. The board is blue (maybe clone/generic) and was release on march 2019. I tried to load this amazing firmware but It was impossible, stops after 7% with error " [0x32030201]Uboot/Get result/DiskInitial error". The only firmware that I could install was AndroidTV_7_S905W_Bluetooth_Tue_Minh_20190320.zip from a vietnamese website HERE.

Is there anything else that I can do for install atvXv4 ROM or another ATV9 rom? And how?
Thanks in advance.

View attachment 5356271

Flash one more time, it works on the second try, it worked for me!

 

[mlcattini]

Flash one more time, it works on the second try, it worked for me!

by the way all the apps, amazon, netflix and disney+ are not working...

Im gonna try aidans rom. https://aidansrom.wordpress.com/

 

[AcidIce18]

Hi, I made an updated official and unofficial atvX Rom that has a bunch of fixes and capabilities - see below for details. As always - use at own risk.
No support is available for the unofficial ROM
Official ROM support is available at https://forum.atvxperience.com

Official ROM v4.3: https://mega.nz/file/Jvw3CAQA#rPhpGfPI-4sNfSayxlgRP-wcFlIfKZwBqU4HnKPxdiw

4.3: General fixes / updates
-----------------------------------------------------------------------------
* Landing page now include a "Skip" option at Wireless Connection section
* Connecting to google play will not be a requiement at Landing page,
You can now login for google play after the initial setup via Accounts or
Google Play Store
* Replaced ASOP Keyboard with a dark mode version
* Adjusted LCD Density so that HomeScreen Icons display correctly
* Removed startup sound on bootanimation
* Remove bloatware for a faster install
* Replaced Netflix with Netflix TV version that works with default remote
* Replaced Airscreen with CastReceiver for casting to the device
* Updated Puffin browser with the latest version at the date of release

Unofficial v4.3.1 ROM: https://mega.nz/file/025z0KCY#D1b6S_kJn2H6fKvQbQr_epjlRJfnU0euu_0mqQemMAU

Change Notes: All updates from Official 4.3 ROM + the changes mentioned below

v.4.3.1: General fixes / updates
-----------------------------------------------------------------------------

* fixed SuperSu application not working
* General bug fixes
* Notifications added
* DoubleTap Home button to bring up Recents menu added (Required Air-mouse to work)
* Fixed Android TV Remote not working with android TV app via phone
* Voice functions on atv remote works
* Replaced boot partition with a version that is Magisk Root capable
* Included instructions and files needed to Magisk Root your device

 

[leo025]

Flash one more time, it works on the second try, it worked for me!

Hey @mlcattini thank you. I tried but still bricking my box. Another advice?

BTW I identified my box. The board is CS_905W_TX_3D_V1.3. I think is NAND 3D here the images.

And my WIFI/BT specs are odd. The specdevice show me dwc3 on wifi and bt only yes.

I had success only with these ATV 7 roms :

1. AndroidTV_7_S905W_Bluetooth_Tue_Minh_20190320.zip a vietnamese
2. Neutral-9012-Alice-8.1-TX3Mini-20191014.img
3. atvXperience_S905W_V2H_FINAL_TX3_NEW_REVISION.img

Can anybody help me? Is it possible to install ATV 9 firmware for this NAND 3D? how? I think that's the problem.

 

[leo025]

Hi, I made an updated official and unofficial atvX Rom that has a bunch of fixes and capabilities - see below for details. As always - use at own risk.
No support is available for the unofficial ROM
Official ROM support is available at https://forum.atvxperience.com

Official ROM v4.3: https://mega.nz/file/Jvw3CAQA#rPhpGfPI-4sNfSayxlgRP-wcFlIfKZwBqU4HnKPxdiw

4.3: General fixes / updates
-----------------------------------------------------------------------------
* Landing page now include a "Skip" option at Wireless Connection section
* Connecting to google play will not be a requiement at Landing page,
You can now login for google play after the initial setup via Accounts or
Google Play Store
* Replaced ASOP Keyboard with a dark mode version
* Adjusted LCD Density so that HomeScreen Icons display correctly
* Removed startup sound on bootanimation
* Remove bloatware for a faster install
* Replaced Netflix with Netflix TV version that works with default remote
* Replaced Airscreen with CastReceiver for casting to the device
* Updated Puffin browser with the latest version at the date of release

Unofficial v4.3.1 ROM: https://mega.nz/file/025z0KCY#D1b6S_kJn2H6fKvQbQr_epjlRJfnU0euu_0mqQemMAU

Change Notes: All updates from Official 4.3 ROM + the changes mentioned below

v.4.3.1: General fixes / updates
-----------------------------------------------------------------------------

* fixed SuperSu application not working
* General bug fixes
* Notifications added
* DoubleTap Home button to bring up Recents menu added (Required Air-mouse to work)
* Fixed Android TV Remote not working with android TV app via phone
* Voice functions on atv remote works
* Replaced boot partition with a version that is Magisk Root capable
* Included instructions and files needed to Magisk Root your device

Hi @AcidIce18, can you make work your ROM with my TX3 mini with board is CS_905W_TX_3D_V1.3 (NAND 3D)? I'll really appreciate that

Thanks for advance!!

 

[DJJaro18]

Manual how to install this update package? I try via update on info menu and via bootloader ( havent update image error), via usb cable (crash in 2%) nothing function.. I have tanix 3 mini S905W v2H 2G/16G. Now I use ATV X with android 7... no problem install. ATV X forum not function to support. Thanks for help.

solved: uncheck bootloader and tap reset after success

 

[leo025]

Manual how to install this update package? I try via update on info menu and via bootloader ( havent update image error), via usb cable (crash in 2%) nothing function.. I have tanix 3 mini S905W v2H 2G/16G. Now I use ATV X with android 7... no problem install. ATV X forum not function to support. Thanks for help.

solved: uncheck bootloader and tap reset after success

Same here dude

 

[Ayrfiger]

Excellent work by the atvX team. Install on a similar MXQ pro 4k. I would like to know if it is normal for only one USB port of the four available to work. Sorry for my Brazilian English. Thanks.

 

[Ayrfiger]

Instalei na STV-2000. Com air mouse funciona. Mas não trabalham as outras três portas USB (sem energia inclusive). Também parou de funcionar o controle remoto original. Dá para instalar os drivers? Se alguém souber, agradeço.

 

[soniadarsh63]

CAN MI BOX 4K REMOTE WORK FOR X96 MINI INSTALLED ATVXPERIENCE V4

 

[debiantonio]

AcidIce18 ! 4.3.1 UNNOFICIAL very smooth in my old TX3Mini 1gb RAM /8gb. Wifi SV6051P 2.4, Netflix, Aptoide upgrade easy... IPTV 100% ... Nice work !!​

 

[Ayrfiger]

I Install on a similar MXQ pro 4k. I would like to know if it is normal for only one USB port of the four available to work and IR remote don't work...

 

[debiantonio]

I Install on a similar MXQ pro 4k. I would like to know if it is normal for only one USB port of the four available to work and IR remote don't work...

My TX3Mini only IR remote cannot play ! I'm using mini keyboard and two USB ports+SD card slot 100% functional...and wifi 2.4 no lags

 

[PinguiNUX]

Hi, a few days ago I tried this rom in its latest version on my Tanix TX3 Mini, but I have encountered a problem. It turns out that the wifi does not work at all. I would like you to solve this problem as soon as possible. My wifi model is ap6330+9012p. So far, I have not found any way to make it work with this rom.

Everything else seems to work perfectly.

Regards