[S912 DEVICES][ROM] Poison ROM [V4.3][STABLE]

Search This thread

rexamillion59

Senior Member
Feb 28, 2011
237
14
looks like i will need stock 3/32 normal file with twrp baked in can i have a link to that one please. At this point i have poison rom splash screen only will not boot system need to probly start over and off course i do not have a back up to go to TWRP will boot with sd card and normal recovery also still work
 

luca_brasi

Member
May 18, 2013
34
8
Poison rom should work with both variants. Did you try to reflash poison via TWRP (started from sd card)?
Can't help you out with non lp variant, I don't have it.
 

rexamillion59

Senior Member
Feb 28, 2011
237
14
i bricked it going to buy new box now but ill keep trying to fix this one. it no longer shows up on pc and no signal on tv display.but thanks for your help
 

luca_brasi

Member
May 18, 2013
34
8
If your box does not show up on PC any more you can only unbrick it by resetting the NAND. Find out which chip is mounted and look for the two pins you have to shortcut to reset. After the the reset box will show up on PC in the Amogic flashtool.
For my box it looks like this:
 

Attachments

  • nand_reset_t95zPlus_foresee32g.jpg
    nand_reset_t95zPlus_foresee32g.jpg
    113.8 KB · Views: 208

[email protected]

New member
Dec 9, 2020
2
0
hello. please any one can help me ? I have problem burning SD card when i am trying to burn the image file in poison rom 4.3 .zip it give me this error message { L(1008) fail to extract G:\ bootloader. PARTITION from Pkg } ... i am using ( Burn_Card_Maker V2.0.3 )
 

aidanmacgregor

Senior Member
Nov 19, 2011
1,537
452
Caithness
aidansrom.ml
hello. please any one can help me ? I have problem burning SD card when i am trying to burn the image file in poison rom 4.3 .zip it give me this error message { L(1008) fail to extract G:\ bootloader. PARTITION from Pkg } ... i am using ( Burn_Card_Maker V2.0.3 )

.partition files are inside IMG firmware files, Update Zips dont contain bootloader.partition or any.partition, ypubwill need to use TWRP to flash the zip probably
 

[email protected]

New member
Dec 9, 2020
2
0
.partition files are inside IMG firmware files, Update Zips dont contain bootloader.partition or any.partition, ypubwill need to use TWRP to flash the zip probably

Please can you explain more how to do this ( you will need to use TWRP to flash the zip probably)
i am sorry i am beginner on this . by the way my TV box is t95z plus 7.1.2 ....thank you very much
 

Serg_Grib

New member
Dec 11, 2020
1
0
I have a T95r pro 3/32 TV box with 6255 Wi-Fi module, android 7.1.2, I tried to flash Poison ROM 4.3 via TWRP, the firmware failed and got a boot loop. Can you please tell me where can I download the firmware suitable for my set-top box?
12345.jpg
 

asskicka101

New member
Nov 13, 2013
4
0
Guys, can anybody help me out in choosing and if it is possible for my SCISHION V99 Magic S912 (3Gb-32Gb) be using those firmwares...mine got android 6 in it, since I bought through AliE...somehow, mine working pretty sluggish especially with Kodi and I have another box with S905 chip in it and that is working fine & smooth compare to this box.

Oh another thing is, I always install either Top TV Launcher 2 or SquareHome Launcher (those are my favourites & very customizable also, android tv efficient when using remote or mouse). Is there probability that there is a compatibilty issue with factory installed launcher? Although, from my trial & error effort of trying many different launchers, I have found that those 2 probably the best launcher to have in the TV Box.

Any response will be much appreciate. Thanks, guyz/girlz...
Schision V99 Magic 3Gb-32GB.png
 

Attachments

  • SCISHION V99 s912 [1].jpg
    SCISHION V99 s912 [1].jpg
    103.3 KB · Views: 20

rexamillion59

Senior Member
Feb 28, 2011
237
14
thank you to alll. i have unbricked my box. i contacted evanpo and they were able to give me correct firmware for my box. i still had to short the nand chip and upgrade started. everything is working perfect including wifi. so big thanks to all. now just need better instruction on installing TWRP. question can i reuse tf card i used to flash it wasbootcard maker i used to make the tf card.thanks for assistace
 

luca_brasi

Member
May 18, 2013
34
8
1: Put "Twrp.img" to sd card
2: rename it "recovery.img"
3: Put "poison.zip" to sd card
4: turn your box off
5: insert sd card
6: take a toothpic and push the button inside the AV connector
7: plug in power while holding the button
=>box boots to TWRP and you can install .zip-files
 

rexamillion59

Senior Member
Feb 28, 2011
237
14
1: Put "Twrp.img" to sd card
2: rename it "recovery.img"
3: Put "poison.zip" to sd card
4: turn your box off
5: insert sd card
6: take a toothpic and push the button inside the AV connector
7: plug in power while holding the button
=>box boots to TWRP and you can install .zip-files
i did that and twrp did load but would not let me tick micro sd card
 

rexamillion59

Senior Member
Feb 28, 2011
237
14
twrp is working perfect able to restore bacxkup no proble but rom still not starting past splash screen hanging up at logo and black sreen any ideas
 

aidanmacgregor

Senior Member
Nov 19, 2011
1,537
452
Caithness
aidansrom.ml
twrp is working perfect able to restore bacxkup no proble but rom still not starting past splash screen hanging up at logo and black sreen any ideas

Usally see issues if not using the same TWRP Version as backup was made on & this can also happen if you try to restore a backup over a diffrent rom than the backup was made on, this is almost always the case when restoring a backup of a diffent android version (say android 9 and restoring android 7 rom) so install the rom the backup was made on amd failing that roms that are the same android version :)
 

rexamillion59

Senior Member
Feb 28, 2011
237
14
Usally see issues if not using the same TWRP Version as backup was made on & this can also happen if you try to restore a backup over a diffrent rom than the backup was made on, this is almost always the case when restoring a backup of a diffent android version (say android 9 and restoring android 7 rom) so install the rom the backup was made on amd failing that roms that are the same android version :)
i have same twrp as posted from this thread for t95z plus installed on box backup from box in fact i have two of these boxes and can not get poison to run on either one i have reinstalled from backup mutipal times. im lost
 

aidanmacgregor

Senior Member
Nov 19, 2011
1,537
452
Caithness
aidansrom.ml
i have same twrp as posted from this thread for t95z plus installed on box backup from box in fact i have two of these boxes and can not get poison to run on either one i have reinstalled from backup mutipal times. im lost

S912 is a complex beast, there can be several reasons for a failed install, you could try my s912 roms (android 9) there are versions for ddr3 & ddr4, LPDDR3 and Slow EMMC versions you could try those, also USB burn tool is install method I reccomend as SD Card install method can fail alot and with no info on what stage it failed at & USBBurm Tool Can Unbrick your box from a bad flash
 

Top Liked Posts

  • There are no posts matching your filters.
  • 54
    Poison ROM


    Introduction
    Welcome to the Poison ROM thread.

    As promised, we're delivering a stunning quality ROM to the S912 community. Even though it was originally made for the T95Z, it may or may not work on other S912 Devices as well.

    All bugs within the firmware are fixed as well as a lot of extra features added.
    A lot of time and effort has been put into this project so if you feel the ROM is good enough for a donation, you can DONATE HERE

    This ROM was originally created for the T95Zdevice, you can purchase the 2/16GB version here or the 3/32GB version here

    Features
    <----------------------------------->
    Network Tweaks
    <----------------------------------->
    -Increased Beacon Filtering
    -Disabled IP checksum offloading
    -Enabled 802.11d support
    -Decreased AP monitor link period
    -Extended AP link keep alive period(1.5)
    -Disabled Powersave Offload
    -Decreased active channel time
    -Disabled logging and sending data
    -Use google DNS by default
    -Extended TCP buffer size
    -IPV4 tweaks
    -Other various network enhancement tweaks
    <----------------------------------->
    UI Tweaks
    <----------------------------------->
    -Semi Transparent Navigation and Statusbar
    -Improved Tile Icons
    -Transparent Tiles
    -Removed logo
    -Improved Wifi Icon
    -Improved Application Icons
    -Modified LED resources
    -Poison Boot Video
    -Window animation now scales faster
    <----------------------------------->
    Property tweaks
    <----------------------------------->
    -ADB enabled by default
    -Device does not sleep by default unless power key is pressed
    -Developer Options enabled by default
    -HDMI CEC enabled by default
    -Faster Streaming(network tweaks)
    -Better Image Quality
    -Enabled Performance Tuning
    -Enabled Dithering
    <----------------------------------->
    Fixes
    <----------------------------------->
    -Enter key bug
    -H.264 playback
    -Statusbar and Navigation Bar Full Immersive
    --Google Playstore resetting
    <----------------------------------->
    Smoother experience
    <----------------------------------->
    -Removed Bloat Apps
    -Removed Bloat Libraries
    -Removed Factory Apps
    -Removed Stock Kodi config files
    -Removed pre-installed apps
    -Removed PPPoE
    -Removed obsolete/unusable apps
    -Removed TTS data
    -Enabled .mp4 Boot Videos
    -Adblocking hosts
    -Init.d enabled
    -CEC tweaked
    -Added smoother graphics tweaks
    -EsFileExplorer as default File Manager
    -Reboot app
    -Init.d enabled
    -String LMK handling
    -Deadline scheduler set on boot
    -SDcard read ahead increased
    -Disabled certain logging
    -Root and system mounted Noatime
    -Pre-installed apps are removed from storage after installed
    <----------------------------------->
    Universal installation
    <----------------------------------->
    -Modified to use preinstalled kernel on device
    -Based on T95Z 3/32 build 1076 firmware
    -May work on other S912 devices.



    Installation
    NOTE: If your device is not on android 7.1.2 you must flash stock 7.1.2 with USB burning tool to update the bootloader.

    USB Burning Tools can be downloaded from here.

    If you have the T95Z device (Normal Ram, not LP Ram version), I have modified the Stock Firmware to include Custom Recovery (TWRP) already, there is no need to flash Custom Recovery if you flash the modified Stock 7.1.2 Firmware below. Just boot into Recovery and Flash Poison Rom.

    Here is the T95Z 7.1.2 Modified Stock Firmware with TWRP pre-installed for 2/16 - Download here

    Here is T95Z 7.1.2 Modified Stock Firmware with TWRP pre-installed for 3/32 - Download here


    If you have one of the newer T95Z boxes with the LP Ram and for some reason your Firmware version is not 7.1.2, you will need to flash the LP Ram version 7.1.2 of Firmware, this is unmodified Stock Firmware, meaning that twrp is not pre-installed.

    Here is the LP Ram Version T95Z 7.1.2 Stock Firmware for 3/32: Download here

    Here is the LP Ram Version T95Z 7.1.2 Stock Firmware for 2/16: Download here

    NOTE: For Non T95Z devices, you must have TWRP recovery installed on your device, if your device is not the T95Z and you have your own devices Stock 7.1.2 Firmware installed, you can flash the Custom Recovery (TWRP) for S912 devices below.

    2gb Ram S912 TWRP can be downloaded from here:
    3gb Ram S912 TWRP can be downloaded from here.


    NOTE: v3.0+ is compatible with 1/8, 1/16, 2/8, 2/16, 3/16 and 3/32 variants.
    One Package for them all

    1. Reboot into recovery
    2. Perform a Standard Wipe (Click wipe, swipe to wipe)
    3. Select Install and Install the Poison zip file
    4. Enjoy Poison Rom!

    WARNING: On first boot, after Boot Video plays, the screen will stay black for up to 5 mins, wait until the launcher appears and finishes installing apps (10 min) before using Rom.

    Download
    DOWNLOAD V4.3 - STABLE
    DOWNLOAD V4.1 - STABLE

    Changelog

    ----------------------------------------> V4.3

    Updated to latest Google Play Store to fix the issue of not recognizing purchased apps.
    Updated to latest Google Play Services
    Reverted back to V4.1 Boot Video

    ----------------------------------------> V4.2

    Fixed background play issue. (Home button closing apps etc)
    Launcher Tiles set back to Default (Browser opens Firefox, Kodi opens Kodi 17.6)
    Preinstalled apps updated to Latest Versions


    ----------------------------------------> V4.1

    Fixed Install Bootloop

    ----------------------------------------> V4.0

    New Boot Logo
    New Boot Animation
    Fixed Various Settings scripts
    Settings are now only applied on first boot
    Fixed Wifi backup/restore
    Fixed Bluetooth backup/restore
    Added remote configuration backup/restore
    Lightweight browser added
    Youtube HD TV version now preinstalled
    Added AMLogic flasher application
    Redirected the launcher to fix shortcuts
    Kodi 18 preinstalled
    New wallpaper for V4.0
    Completely stabilized for everyone
    Fixed some init.d errors

    ----------------------------------------> V3.5

    Semi working wifi/bt backup
    Added premature logo

    ----------------------------------------> V3.1

    Included play fix

    ----------------------------------------> V3.0

    Based on newer firmware(Build 1076 for 3/32 ported for all other variants)
    Changed DNS servers
    Removed Contacts Sync
    Removed Calendar sync
    Streaming improved
    Fixed hosts blocking some anti-malicous adverts
    OTA updating implemented
    More universal support
    Attempted fix preserving wifi drivers
    Updated busybox(Stericsons)
    Improved init.d functionallity
    Changed the way preinstalled apps are installed
    Fixed Navigation Bar bug
    By default status bar is hidden until hovered
    Removed irrelevant TTS data
    Fixed background process trying to apply wallpaper
    Removed all PPPoE and processes
    Navigation Bar and Status Bar are semi transparent
    Snappier UI
    Quicker Animation Scales
    Navbar and Status Bar do not persist in apps until you go to top or bottom
    Debloated even more, rom is less than 500MB
    USB debugging enabled by default
    Developer options enabled by default
    HDMI CEC enabled by default
    Auto change language disabled by default
    One key play disabled by default
    Device does not sleep by default unless power key is pressed
    Updated reboot recovery icon
    Fixed 4k playback for H.264

    ----------------------------------------> V2.0

    Absolutely lightning fast
    Preinstall folder added
    Brightness fix
    IPV4 Tweaks
    Aggressive low memory killer
    Logger disabled
    Journalism tweaked
    Loopy smoothness tweak
    Zipaligned apps on boot
    Root and system remounted Noatime
    Deadline scheduler set at boot
    Tweaked deadline scheduler
    Sdcard read ahead changed to 2048(faster IO)
    Silenced bootsound
    Fixed Playstore


    ----------------------------------------> V1.0(Initial)

    Network Tweaks
    -Increased Beacon Filtering
    -Disabled IP checksum offloading
    -Enabled 802.11d support
    -Decreased AP monitor link period
    -Extended AP link keep alive period(1.5)
    -Disabled powersave offload
    -Decreased active channel time
    -Disabled logging and sending data
    -Use googles DNS by default
    -Extended TCP buffer size
    -IPV4 tweaks
    -Other various network enhancement tweaks

    UI Tweaks
    -Changed the launcher background(S9 leaked wallpaper)
    -Better looking tile icons
    -Transparent tiles
    -Removed logo
    -Better looking wifi icon
    -Better looking application icons
    -Modified LED resources
    -Poison boot video

    Property tweaks
    -Faster streaming(network tweaks)
    -Better image quality
    -Enabled performance tuning
    -Enabled dithering

    Fixes
    -Enter key bug

    Smoother experience
    -Removed bloat apps
    -Removed default wallpaper(never used)
    -Removed factory apps
    -Removed stock kodi config files
    -Enabled video booting
    -Adblocking hosts
    -Init.d enabled
    -Disabled CEC by default
    -Added smoother graphics tweaks
    -EsFileExplorer as default filemanager
    -Reboot app



    XDA:DevDB Information
    PoisonRom, ROM for the Android Stick & Console Computers

    Contributors
    Ricky Divjakovski, Whiteak
    ROM OS Version: 7.x Nougat

    Version Information
    Status: Stable

    Created 2018-02-18
    Last Updated 2018-06-20


    XDA:DevDB Information
    [S912 DEVICES][ROM] Poison ROM [V4.3][STABLE], ROM for the Android Stick & Console Computers

    Contributors
    whiteak
    ROM OS Version: 7.x Nougat

    Version Information
    Status: Stable
    Current Stable Version: 4.3

    Created 2018-07-01
    Last Updated 2018-07-04
    12
    Devwlopement is discontinued for all of poison until further notice, family related issues, ill be needing a break for a few weeks
    11
    New SSD + free time = Project back on board!
    Get ready for a Poison V6!
    9
    Honestly never thought this would get 200k views on the thread and almost 100k downloads, great job everyone, i will update this ROM soon!
    8
    Update coming quite soon