Sailfish OS for the Xiaomi Redmi Note 5/ 5 Plus (vince)

Search This thread

0312birdzhang

Senior Member
https%3A%2F%2Fsailfishos.org%2Fwiki%2Fimages%2F1%2F11%2FSailfishOS_logo_large.png

5af5969f0e24b.png

Change log:

  • 2021-10-08 update to 4.2.0.21
  • 2021-07-08 update to 4.1.0.24
  • 2021-03-08 update to 4.0.1.48
  • 2020-11-20 update to 3.4.0.24
  • 2020-05-02 update to 3.3.0.16
  • 2019-11-16 update to 3.2.0.12
  • 2019-09-27 add 15.1 base sailfishos
  • 2019-09-09 update to 3.1.0.12
  • 2019-05-11 update to 3.0.3.9
  • 2019-03-30 update to 3.0.2.8
  • 2019-03-25 fix FM radio on 3.0.1.11
  • 2019-01-26 update to 3.0.1.11
  • 2018-11-10 update to 3.0.0.8
  • 2018-09-25 fix browser video playback bug(by @PiggZ)
  • 2018-07-22 fix FM radio and power key wakeup delay bugs
  • 2018-06-29 delete some 2.2.0.28 zip, because of some bugs
  • 2018-06-15 2.2.0.29-beta8 fix video record freeze
  • 2018-06-13 fix video thumbnails in Gallery, if you use OTA, you need to remove ffmpeg and install libav, and rm -rf /home/nemo/.cache/org.nemomobile/thumbnails/*
  • 2018-06-10 update to 2.2.0.29
  • 2018-05-17 gps and sensors fixed
  • 2018-05-16 sailfish browser fixed, use "zypper ref && zypper up" to upgrade


What works:
  • calls/SMS/data
  • audio
  • video
  • wifi
  • bt
  • camera
  • sensors
  • GPS
  • FM

what's not:
  1. fingerprint(as the stuff not done yet)
  2. IR(no 32bit lib)


How to install

1.packages need to be downloaded:


2.install steps:
  1. unlock bootloader, you will need to wait some days
  2. rollback to miui 9?(android 7.1 based version) if you are on miui10
  3. flash twrp
  4. flash HM5Plus_8.2.1.zip (flash only once)
  5. flash lineage-14.1-20180304-UNOFFICIAL-vince.zip in recovery
  6. reboot to recovery, flash sailfishos-vince-release-$VERSION-devel-$DATE.zip
enjoy :)

OTA updates
To upgrade to a new Sailfish OS release, enter these commands as root
Code:
ssu re 3.4.0.24 #change it
version --dup

For update to 4.1.0.24, you need do some more
Code:
ssu ar sfos-test https://repo.sailfishos.club/4.1.0.24/xiaomi-vince/armv7hl/
ssu dr adaptation-community-common
ssu dr adaptation-community
ssu re 4.1.0.24
version --dup



WIKI Page
https://wiki.merproject.org/wiki/Adaptations/libhybris/Install_SailfishOS_for_Vince

Bug report
freenode: #sailfishos-porters or #jolla-cn
telegram: t.me/vincehalium
Github https://github.com/Sailfish-On-Vince/issues/issues

Thanks
First of all, very thanks to zhxt, no him no this.
Also thanks @TingyiChen , PiggZ and zamoroz from github. mal,sledges,ghosalmartin,krnlyng from #sailfishos-porters.

Paypal
https://www.paypal.me/birdzhang
 
Last edited:

0312birdzhang

Senior Member
  • Like
Reactions: PikuseruGMD

PikuseruGMD

Member
May 7, 2017
13
2
Last edited:

ecrudragon

Senior Member
Oct 13, 2012
762
137
Heart of Sharjah
waiting eagerly to try this beautiful rom just crossing my fingers for android support because without some of the android apps which i need for my work i can't use this rom.
 
  • Like
Reactions: Bx16

Bx16

Senior Member
Oct 27, 2013
230
543
Poznań
Good news! :fingers-crossed:
I too had ERROR in TWRP (from TWRP site and treble TWRP), just removed from updater-script 1 line and it's working fine on treble TWRP.
Awesome work mate with this port. Do you tried to install alien dalvik? I found some instructions on maemo forum.
I set camera in 10MP mode and it's not working now, and I can't use app "touch" from jolla store.
 

0312birdzhang

Senior Member
I too had ERROR in TWRP (from TWRP site and treble TWRP), just removed from updater-script 1 line and it's working fine on treble TWRP.
Awesome work mate with this port. Do you tried to install alien dalvik? I found some instructions on maemo forum.
I set camera in 10MP mode and it's not working now, and I can't use app "touch" from jolla store.

Thank you for your replay. Camera must be set to low resolution, and third part camear app may not work.
 
  • Like
Reactions: Bx16

Bx16

Senior Member
Oct 27, 2013
230
543
Poznań
Thank you for your replay. Camera must be set to low resolution, and third part camear app may not work.

Hi, I found some bugs, you mentioned GPS (network location working, I tested WhoGo maps and it's show close location), sensors and:
Low camera resolution, low maximum brightness (on sun I see nothing) and I can't do logcat with alien dalvik (I wrote to you in IRC channel). Torch is working fine, now I'm using system torch.
With latest update stock browser working fine.
I tested mobile data, sms, phone calls, wifi, camera (front, back), recording and playing it. All good :)
If you need any log or testing help just PM me or give instruction here. :D
I also wrote to MOD to move thread to development and it's happened.
Again thanks for work at this port.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 42
    https%3A%2F%2Fsailfishos.org%2Fwiki%2Fimages%2F1%2F11%2FSailfishOS_logo_large.png

    5af5969f0e24b.png

    Change log:

    • 2021-10-08 update to 4.2.0.21
    • 2021-07-08 update to 4.1.0.24
    • 2021-03-08 update to 4.0.1.48
    • 2020-11-20 update to 3.4.0.24
    • 2020-05-02 update to 3.3.0.16
    • 2019-11-16 update to 3.2.0.12
    • 2019-09-27 add 15.1 base sailfishos
    • 2019-09-09 update to 3.1.0.12
    • 2019-05-11 update to 3.0.3.9
    • 2019-03-30 update to 3.0.2.8
    • 2019-03-25 fix FM radio on 3.0.1.11
    • 2019-01-26 update to 3.0.1.11
    • 2018-11-10 update to 3.0.0.8
    • 2018-09-25 fix browser video playback bug(by @PiggZ)
    • 2018-07-22 fix FM radio and power key wakeup delay bugs
    • 2018-06-29 delete some 2.2.0.28 zip, because of some bugs
    • 2018-06-15 2.2.0.29-beta8 fix video record freeze
    • 2018-06-13 fix video thumbnails in Gallery, if you use OTA, you need to remove ffmpeg and install libav, and rm -rf /home/nemo/.cache/org.nemomobile/thumbnails/*
    • 2018-06-10 update to 2.2.0.29
    • 2018-05-17 gps and sensors fixed
    • 2018-05-16 sailfish browser fixed, use "zypper ref && zypper up" to upgrade


    What works:
    • calls/SMS/data
    • audio
    • video
    • wifi
    • bt
    • camera
    • sensors
    • GPS
    • FM

    what's not:
    1. fingerprint(as the stuff not done yet)
    2. IR(no 32bit lib)


    How to install

    1.packages need to be downloaded:


    2.install steps:
    1. unlock bootloader, you will need to wait some days
    2. rollback to miui 9?(android 7.1 based version) if you are on miui10
    3. flash twrp
    4. flash HM5Plus_8.2.1.zip (flash only once)
    5. flash lineage-14.1-20180304-UNOFFICIAL-vince.zip in recovery
    6. reboot to recovery, flash sailfishos-vince-release-$VERSION-devel-$DATE.zip
    enjoy :)

    OTA updates
    To upgrade to a new Sailfish OS release, enter these commands as root
    Code:
    ssu re 3.4.0.24 #change it
    version --dup

    For update to 4.1.0.24, you need do some more
    Code:
    ssu ar sfos-test https://repo.sailfishos.club/4.1.0.24/xiaomi-vince/armv7hl/
    ssu dr adaptation-community-common
    ssu dr adaptation-community
    ssu re 4.1.0.24
    version --dup



    WIKI Page
    https://wiki.merproject.org/wiki/Adaptations/libhybris/Install_SailfishOS_for_Vince

    Bug report
    freenode: #sailfishos-porters or #jolla-cn
    telegram: t.me/vincehalium
    Github https://github.com/Sailfish-On-Vince/issues/issues

    Thanks
    First of all, very thanks to zhxt, no him no this.
    Also thanks @TingyiChen , PiggZ and zamoroz from github. mal,sledges,ghosalmartin,krnlyng from #sailfishos-porters.

    Paypal
    https://www.paypal.me/birdzhang
    6
    2.2.0.29 version has too many bugs, so i delete some on http://images.devaamo.fi/sfe/vince/ , i suggest you install 2.1.4.14-beta4, it's only has one bug(fixed in 2.2.0.29, i will try to fix it in 2.1.4.14).
    6
    FM radio was fixed, use " zypper ref && zypper up " to upgrade
    3
    Update: 2018-11-10
    upgrade to 3.0.0.8(only on testing branch), devel branch need obs maintainer change latest repo to 3.0.0.8.
    If you are on testing branch, you can use ssu re 3.0.0.8 and version --dup to upgrade now.
    If you are on devel branch, you need to wait a little longer.

    Chech which branch you are
    Code:
    [nemo@Sailfish ~]$ ssu lr|grep adaptation-community|grep testing
     - adaptation-community        ... [url]http://repo.merproject.org/obs/nemo:/testing:/hw:/xiaomi:/vince/sailfishos_3.0.0.8/[/url]
     - adaptation-community-common ... [url]http://repo.merproject.org/obs/nemo:/testing:/hw:/common/sailfishos_3.0.0.8/[/url]
    3
    Sensors fixed!(rotation sensor and magnetometer sensor not work)
    use zypper ref && zypper up to update