You can download any samsung FW files from samfirmware.com.
They keep all the Samsug related firmwares and are trustworthy.
Samsung Galaxy 3 (I5801/I5800) Flashing Guide
- Thread starter braveBuddy
- Start date
They keep all the Samsug related firmwares and are trustworthy.
JPF has 4 files inside in .tar.md5. you must not select one package, you should select them one by one!
BOOT: I5800XXJPF-REV02-Bootloader-low-CL794643.tar.md5
PHONE: I5800XXJP4_PHONE.tar.md5
PDA: I5800XXJPF-REV02-PDA-CL794643.tar.md5
CSC: I5800OXXJPF-CSC-MULTI-OXX.tar.md5
and...... START
Just proceed as kyrillos said, but it's better not to flash the BOOT in order not to get the phone bricked...
The .tar.md5 files are your tar archives. I don't remember if I had to rename them to .tar, but I think you can feed them to Odin directly as they are. If it complains, rename them.
yes. dont flash BOOT... it will greatly reduce the chances of bricking your phone!!
thanks!! works like a charm. most apps are much faster to load, though i noticed lower fps in games (e.g. cityjump)
How do i separate boot.bin and sbi.bin from .tar package..? I'm trying to flash jpf on my stock eclair I5801DDJG6...
THANKS..
Sent from my GT-I5801 using XDA App
Last edited:
well i flashed JPB with sbl.bin and worked .. but when i want to flash JPM from samfirmware it gives me error ... i think it wants that sbl.bin file ..help ??
Hello,
i followed the guide exactly but i have a problem.
In the message box it is as follows:
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V2, P9,R2
<1> START!!!
<1> set download environment.
<1> logo.png download..
<1> 1/5 Finished.
<1> zImage download..
<1> 2/5 Finished.
<1> factoryfs.rfs download..
<1> 3/5 Finished.
<1> cache.rfs download..
<1> 4/5 Finished.
<1> modem.bin download..
<1> 5/5 Finished.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.
That is at about 1:30 and then the phone reboots on its own. Afterwards it is stuck in the system recovery screen.
However many times i reboot, even by doing a wipe, it still returns to that screen.
Anyone knows what i am doing wrong?
i followed the guide exactly but i have a problem.
In the message box it is as follows:
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V2, P9,R2
<1> START!!!
<1> set download environment.
<1> logo.png download..
<1> 1/5 Finished.
<1> zImage download..
<1> 2/5 Finished.
<1> factoryfs.rfs download..
<1> 3/5 Finished.
<1> cache.rfs download..
<1> 4/5 Finished.
<1> modem.bin download..
<1> 5/5 Finished.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.
That is at about 1:30 and then the phone reboots on its own. Afterwards it is stuck in the system recovery screen.
However many times i reboot, even by doing a wipe, it still returns to that screen.
Anyone knows what i am doing wrong?
Why is the BOOT even there then? It won't have any effect on the performance or behaviour of you ROM kyrillos?
thx
If You have separate files like
BOOT: I5800XXJPF-REV02-Bootloader-low-CL794643.tar.md5
PHONE: I5800XXJP4_PHONE.tar.md5
PDA: I5800XXJPF-REV02-PDA-CL794643.tar.md5
CSC: I5800OXXJPF-CSC-MULTI-OXX.tar.md5
Then don't select I5800XXJPF-REV02-Bootloader-low-CL794643.tar.md5 in ODIN while flashing.
And if the ROM is in .tar format (one package ) then open the .tar file using winRar or .7zip and delete sbi.bin and boot.bin (if it is present).
ODIN never showed the PASS message for me
but phone restarted and works.
any prob with it?
but phone restarted and works.
any prob with it?
None, I don't see the point in waiting for PASS.
I always get a PASS (if I wait) even though I disconnected the phone on reboot. It doesn't say anything as far as I can tell, it has long lost it's connection to test anything.
To open tar files and delete the bin files i recommend total commander
You should wait for the PASS message in ODIN, and until that you should not remove the usb cable.
Normaly the PASS message appears in aprox 6 7 min.
It's normal the phone restarts at the middle of the process.
I dont think waiting for the PASS has something to do with any form of testing by the ODIN. If you see ODIN, there is a Reset Timer (Sec), Pass will be displayed exactly after 5 mins of reset command.
Change the time and you will get pass early.
Secondly if u flash fugumod kernel, it never detects the phone ater restart until usb cable is unplugged and replugged but still gives Pass
Waiting for the pass message in Odin is absolutely not needed, i never did this for the last two years and three Samsung android phones...
It only makes sense if u use Odin to flash multiple phones at once (what is the original purpouse of Odin Multi Downloader)
----------------------------------------
tapatalked
It only makes sense if u use Odin to flash multiple phones at once (what is the original purpouse of Odin Multi Downloader)
----------------------------------------
tapatalked
Last edited:
Hi, I'm new in this forum, and I don't know if I can post other post here.
Can you help me please?
this is the Thread of the problem
http://forum.xda-developers.com/showthread.php?t=1078889
My odin doesnt show this...it doesnt detect my g3...though m able to use my g3 as mass storage and also usb debugging and usb tethering? What wrong with ODIN?..can someone help??
Thats because you are connecting the phone which has booted already. You need to put it in download mode by pressing the power+vol down+home key till u get the GT-I5800/5801 logo.
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone