This tutorial shows you how to Flash stock Firmware using Odin on Galaxy S Dous [S7562]
Requirements :--->
1. Odin3.07
2. Samsung Usb Driver
3. Stock Firmware
4. Official USB cable
5. Ofcourse Galaxy S Dous Phone
note :-> click on above requirements to download them..
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Flashing Tutorial :-->
1. Install usb drivers on pc....
2. reboot ur pc
3. Download the ODIN 3.07 & save it in your PC and extract its content to Desktop.
4. Download the update firmware.zip && save it in your PC and extract the update file on your Desktop.
5. Now, turn off your Samsung Galaxy S duos device
6. Boot your S Duos device into the Download mode by pressing [ Volume down + Menu + power ] buttons on the same time.
![]()
7. now ur phone will boot into download mode ........u will see a "WARNING" like following pic.....
![]()
8. now press "VOLUME UP" button to enter into download mode :--> like the following pic -->
![]()
9. Now open "ODIN 3.07.exe" on desktop & attach ur phone to ur pc using stock usb cable.
10. When the connection is established with odin , u will be notified with the “added” message that will be displayed on the Odin interface, the ID:COM section should be colored on yellow or blue.
11. click on PDA button && select the S7562XXXXXX_S7562XXXXXX_XXXHOME.tar u extracted on desktop [file name may differ ]
12. now click on "START" button & it will take some time to flash the firmware ....
Note:-> DON'T interrupt the flashing process, it may brick ur device [ soft or hard brick]
13. U will see a "PASS" & "RESET" on ODIN application...
http://forum.xda-developers.com/attachment.php?attachmentid=2052420&thumb=1&d=1371571545
14. Ur phone will reboot automatically & u should be booted successfully ....
15. enjoy [ u have flashed stock firmware successfully on ur device ].:highfive::good::fingers-crossed:
F.A.Q :->
1.) If the ODIN get stuck ?
ANS:->
Close the ODIN.
Disconnect your device from the PC by removing the USB cable.
again connect the device with pc.
again open Odin
Repeat the tutorial.
2.) If your device gets a Boot Loop [ boot animation agian & agian ] ?
ANS:->
Reboot device into the Recovery Mode [ VOLUME UP + DOWN + MENU + POWER ]
Perform a “wipe data factory reset” and after that “wipe cache partition”.
Then choose “reboot system now”
_______________________________________________________________________________________________________________________
Direct download links for latest firmwares of some countries :---------->
1. Latest INDIAN Firmware --> https://docs.google.com/file/d/0B4oKK_gDpwCYQ2E2eTdYN3ozZkE/edit?usp=sharing (google drive link)
2. old Pakistan Firmware :-> https://hotfile.com/dl/182607517/5c4a6e7/S7562XXALJ4_S7562OJVALJ1_PAK.zip.html
3. old Australia Firmware :-> https://hotfile.com/dl/182237627/6d44880/S7562XXALIC_S7562XSAALI4_XSA.zip.html
3. old Malaysia Firmware :-> https://hotfile.com/dl/181722186/1341499/S7562XXALJ4_S7562OLBALH5_XME.zip.html
3. old Sri Lanka Firmware :-> https://hotfile.com/dl/229450235/834a3ca/S7562XXBMF2_S7562ODDBMF1_SLK.zip.html
_______________________________________________________________________________________________________________________
I am Not Responsible For It
_______________________________________________________________________________________________________________________
regards,
Utkarsh Mahajan
www.568team.blogspot.com
hi
I have a problem with my s7562. I followed instructions as you said above, it all goes fine odin and the phone. but when the phone turns on it is still the same rom I mean the old rom my apps and everything
This tutorial shows you how to Flash stock Firmware using Odin on Galaxy S Dous [S7562]
Requirements :--->
1. Odin3.07
2. Samsung Usb Driver
3. Stock Firmware
4. Official USB cable
5. Ofcourse Galaxy S Dous Phone
note :-> click on above requirements to download them..
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Flashing Tutorial :-->
1. Install usb drivers on pc....
2. reboot ur pc
3. Download the ODIN 3.07 & save it in your PC and extract its content to Desktop.
4. Download the update firmware.zip && save it in your PC and extract the update file on your Desktop.
5. Now, turn off your Samsung Galaxy S duos device
6. Boot your S Duos device into the Download mode by pressing [ Volume down + Menu + power ] buttons on the same time.
![]()
7. now ur phone will boot into download mode ........u will see a "WARNING" like following pic.....
![]()
8. now press "VOLUME UP" button to enter into download mode :--> like the following pic -->
![]()
9. Now open "ODIN 3.07.exe" on desktop & attach ur phone to ur pc using stock usb cable.
10. When the connection is established with odin , u will be notified with the “added” message that will be displayed on the Odin interface, the ID:COM section should be colored on yellow or blue.
11. click on PDA button && select the S7562XXXXXX_S7562XXXXXX_XXXHOME.tar u extracted on desktop [file name may differ ]
12. now click on "START" button & it will take some time to flash the firmware ....
Note:-> DON'T interrupt the flashing process, it may brick ur device [ soft or hard brick]
13. U will see a "PASS" & "RESET" on ODIN application...
http://forum.xda-developers.com/attachment.php?attachmentid=2052420&thumb=1&d=1371571545
14. Ur phone will reboot automatically & u should be booted successfully ....
15. enjoy [ u have flashed stock firmware successfully on ur device ].:highfive::good::fingers-crossed:
F.A.Q :->
1.) If the ODIN get stuck ?
ANS:->
Close the ODIN.
Disconnect your device from the PC by removing the USB cable.
again connect the device with pc.
again open Odin
Repeat the tutorial.
2.) If your device gets a Boot Loop [ boot animation agian & agian ] ?
ANS:->
Reboot device into the Recovery Mode [ VOLUME UP + DOWN + MENU + POWER ]
Perform a “wipe data factory reset” and after that “wipe cache partition”.
Then choose “reboot system now”
_______________________________________________________________________________________________________________________
Direct download links for latest firmwares of some countries :---------->
1. Latest INDIAN Firmware --> https://docs.google.com/file/d/0B4oKK_gDpwCYQ2E2eTdYN3ozZkE/edit?usp=sharing (google drive link)
2. old Pakistan Firmware :-> https://hotfile.com/dl/182607517/5c4a6e7/S7562XXALJ4_S7562OJVALJ1_PAK.zip.html
3. old Australia Firmware :-> https://hotfile.com/dl/182237627/6d44880/S7562XXALIC_S7562XSAALI4_XSA.zip.html
3. old Malaysia Firmware :-> https://hotfile.com/dl/181722186/1341499/S7562XXALJ4_S7562OLBALH5_XME.zip.html
3. old Sri Lanka Firmware :-> https://hotfile.com/dl/229450235/834a3ca/S7562XXBMF2_S7562ODDBMF1_SLK.zip.html
_______________________________________________________________________________________________________________________
I am Not Responsible For It
_______________________________________________________________________________________________________________________
regards,
Utkarsh Mahajan
www.568team.blogspot.com
U must download the stock rom for that device and select china as country; then it will be ok !
Sent from my GT-S7562 using XDA Premium 4 mobile app
I Just reflash my phone but I see a warning message in my home screen. Also lock screen like swap lock/pattern lock & power menu not appear.
i have a problem. i have installed stock rom on galaxy s duos.
when it boots after installin the rom it is at the samsung logo wich is blincking .
and it wont boot after waiting 15 min i want to go to recovery mode but nothing
download mode works but same problem after trying it again what now ?
Can you explain me what is setting issue? I don't understand. What I have to do now?