• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[Resolved] Samsung Galaxy S4 I9505 Repair Guide

Search This thread

israr0333

New member
Feb 25, 2015
1
0
Sharjah
*******************Israr Ahmed Khan **************************

Download attached


If I9505 Samsung I9505 is showing only Download mode no recovery no boot it is a great technique to
boot and satart again

First of all you need to install all required driver

Step 1.. Open Odin3-V3.07.exe
step 2.. Choose Pit file "CSB_signed_Fusion3_EUR_0325_V2.pit" But Uncheck "Re-Partition"
Step 3.. Choose Bootloader file "cache.img.ext4.tar"
step 4.. Choose PDA "philz_touch_6.00.0-i9505.tar.md5"

if it is fail even after completing no problem just remove battery Hold Volume Down
and recovery Mode is there .

If above process fails

Try This


Step 1.. Open Odin3-V3.07.exe
step 2.. Choose Pit file "CSB_signed_Fusion3_EUR_0325_V2.pit" But Uncheck "Re-Partition"
step 4.. Choose PDA "philz_touch_6.00.0-i9505.tar.md5"
it will definetly fail But try and try again by removing cabel just need to complete the recovery flash Progress
even it is showing failed

Just remove Battery and Do this

Step 1.. Open Odin3-V3.07.exe
step 2.. Choose Pit file "CSB_signed_Fusion3_EUR_0325_V2.pit" But Uncheck "Re-Partition"
Step 3.. Choose Bootloader file "cache.img.ext4.tar"

It will Definetly Pass

After Restart Hold Volume Down and recovery Mode is there .

Put any Rom Better if cm-12-20150301-NIGHTLY-jfltexx and Gapps

Done It



*******************Israr Ahmed Khan **************************
 

Attachments

  • cache.img.ext4.tar
    17.8 MB · Views: 567

PalmCentro

Senior Member
Dec 8, 2014
1,768
675
█ ▆ ▅ ▃ ▂
*******************Israr Ahmed Khan **************************

Download attached


If I9505 Samsung I9505 is showing only Download mode no recovery no boot it is a great technique to
boot and satart again

First of all you need to install all required driver

Step 1.. Open Odin3-V3.07.exe
step 2.. Choose Pit file "CSB_signed_Fusion3_EUR_0325_V2.pit" But Uncheck "Re-Partition"
Step 3.. Choose Bootloader file "cache.img.ext4.tar"
step 4.. Choose PDA "philz_touch_6.00.0-i9505.tar.md5"

if it is fail even after completing no problem just remove battery Hold Volume Down
and recovery Mode is there .

If above process fails

Try This


Step 1.. Open Odin3-V3.07.exe
step 2.. Choose Pit file "CSB_signed_Fusion3_EUR_0325_V2.pit" But Uncheck "Re-Partition"
step 4.. Choose PDA "philz_touch_6.00.0-i9505.tar.md5"
it will definetly fail But try and try again by removing cabel just need to complete the recovery flash Progress
even it is showing failed

Just remove Battery and Do this

Step 1.. Open Odin3-V3.07.exe
step 2.. Choose Pit file "CSB_signed_Fusion3_EUR_0325_V2.pit" But Uncheck "Re-Partition"
Step 3.. Choose Bootloader file "cache.img.ext4.tar"

It will Definetly Pass

After Restart Hold Volume Down and recovery Mode is there .

Put any Rom Better if cm-12-20150301-NIGHTLY-jfltexx and Gapps

Done It



*******************Israr Ahmed Khan **************************

Why so complicated..??
Download your stock firmware here
And flash with Odin!!
Simple :)