• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

Samsung Galaxy S7 SM-G930F | ROM + ROOT + TWRP + Drivers + Stock Firmware

Status
Not open for further replies.
Search This thread

ROM-HUAWEI

Senior Member
Sep 29, 2014
81
193
Content removed due to malicious links


ROM stock firmware Samsung Galaxy S7 SM-G930F update
sm-g930f.png



Samsung Galaxy S7 SM-G930F


Mod edit: Malicious links removed.


Guide Odin Flash / Update firmware ODIN


  • You do not need to root or unroot the device to update the firmware.
  • Please ensure that KIES is closed and not running in the system tray!

0. Download and Install: Mod edit: Malicious links removed.
1. Just download the firmware version you want from this posts[/URL] and extract the .tar or .tar.md5 file in the archive and save it somewhere.
2. Reboot your phone to download mode. To get download mode shut down the device. After it shuts off completely simultaneously press the Down volume key+ Home button + press the power button .
You should see a warning asking you to press volume up if you want to continue or volume down to cancel, press volume up. You are now in download mode!
3. Start Odin 3.**[/URL]
  • If your ROM is a single .tar.md5 package click on the AP/PDA button and browse to the .tar or .tar.md5 file that you extracted in step 1 and select it.
  • If the package has more than one .tar archive then they will be labelled with PDA/Code, Phone/Modem and CSC. Just put them in the corresponding section of Odin like below
    BL = Bootloader
    AP = PDA (CODE)
    CP = PHONE (MODEM)
    CSC = CSC
4. DO NOT PUT .PIT FILE AND DO NOT, I REPEAT, DO NOT TICK REPARTITION.
5. Connect the USB cable and wait for any required Mod edit: Malicious link removed. to install and the ID:COM section to turn blue like below.
6. Click start to flash.
7. Do not disconnect the cable or turn off the device once the flash has started, it will reboot when it finishes.

*Note PDA/AP/CSC/CO/MODEM/etc
  • PDA refers to the build version of the software/firmware
  • Phone refers to the baseband/modem version
  • CSC is the consumer software customisation and is specific to geographical region and carriers. It contains the software packages specific to that region, carrier branding and also APN settings for data connection, MMS etc for your service provider.
  • .PIT refers to the partition information table you only need it if you screw up your partition table or if the firmware specifically requires it because of a change in the partition table layout. It's very likely you may never have to use this.
If the package only contains one .tar archive then it will have everything, pda+phone+csc, in the one file.

If it has multiple .tar archive then:
The .tar with modem in the name is the phone/baseband bit of the package
.tar with csc/multi-csc in the name is the CSC bit of the package
.tar with code/PDA/AP in the name is the PDA/AP part of the firmware package


odin.jpg


SM-G930F G930FXXU1APAW, SM-G930F G930FXXU1APB4, SM-G930F G930FXXU1APB5, SM-G930F G930FXXU1APB6, SM-G930F G930FXXU1APB9
 
Last edited by a moderator:

joshzdad2013

Senior Member
Dec 12, 2013
88
40
Post Falls
  • Like
Reactions: Chronzy

Rapazzo

Senior Member
Jul 27, 2013
69
37
Never did, i think it's because this phone is locked up BIG TIME by samsung and AT&T, i read this......
http://forum.xda-developers.com/galaxy-s7/how-to/sad-news-galaxy-s7-look-buy-t3335723
So im just sittin here twiddling my thumbs on stock trying to get over my flashaholic tendencies, wondering if i should take this thing back.

Cant imagine that would be the reason though, I mean how would they reflash them at the factory for warranty?
 

juandhi

Senior Member
Apr 7, 2007
79
37
Los Angeles
Apologize if this is a noob question (i searched) . I have a G930F in the U.S. with AT&T , Will any of these firmware versions improve cell reception etc? If I switch firmwares will it allow UK version of Samsung Pay?
 

nord_musician

Member
Dec 17, 2012
45
4
As far as I know, if you flash your phone with another rom is because you have rooted the phone. If you have rooted the phone, then of course you have tripped Knox and therefore Samsung pay wont work, let alone android pay
 

lost_

Senior Member
Jan 29, 2010
951
491
DC
No firmware from the link

1. Just download the firmware version you want from this posts and extract the .tar or .tar.md5 file in the archive and save it somewhere.

Has anyone been able to download from the link? I was getting forwarded to panel-guide.ru and got EXE file instead of the firmware. I was suspicious and sure enough the EXE file got intercepted by MalwareBytes.
 

the Doctor

Retired Senior Moderator
Dec 15, 2011
4,590
4,520
In the TARDIS
Apologize if this is a noob question (i searched) . I have a G930F in the U.S. with AT&T , Will any of these firmware versions improve cell reception etc? If I switch firmwares will it allow UK version of Samsung Pay?
Your first question, don't know. You'll have to experiment.

Your second question, if Samsung Pay comes to the UK in May as predicted, it will probably only work with select UK financial institutions.


As far as I know, if you flash your phone with another rom is because you have rooted the phone. If you have rooted the phone, then of course you have tripped Knox and therefore Samsung pay wont work, let alone android pay

Flashing ROMs and rooting are two different activities independent of each other. Flashing a ROM doesn't necessarily root the device. Flashing official Samsung firmwares don't root the device or trip Knox.
 
Status
Not open for further replies.

Top Liked Posts

  • There are no posts matching your filters.
  • 7
    Content removed due to malicious links


    ROM stock firmware Samsung Galaxy S7 SM-G930F update
    sm-g930f.png



    Samsung Galaxy S7 SM-G930F


    Mod edit: Malicious links removed.


    Guide Odin Flash / Update firmware ODIN


    • You do not need to root or unroot the device to update the firmware.
    • Please ensure that KIES is closed and not running in the system tray!

    0. Download and Install: Mod edit: Malicious links removed.
    1. Just download the firmware version you want from this posts[/URL] and extract the .tar or .tar.md5 file in the archive and save it somewhere.
    2. Reboot your phone to download mode. To get download mode shut down the device. After it shuts off completely simultaneously press the Down volume key+ Home button + press the power button .
    You should see a warning asking you to press volume up if you want to continue or volume down to cancel, press volume up. You are now in download mode!
    3. Start Odin 3.**[/URL]
    • If your ROM is a single .tar.md5 package click on the AP/PDA button and browse to the .tar or .tar.md5 file that you extracted in step 1 and select it.
    • If the package has more than one .tar archive then they will be labelled with PDA/Code, Phone/Modem and CSC. Just put them in the corresponding section of Odin like below
      BL = Bootloader
      AP = PDA (CODE)
      CP = PHONE (MODEM)
      CSC = CSC
    4. DO NOT PUT .PIT FILE AND DO NOT, I REPEAT, DO NOT TICK REPARTITION.
    5. Connect the USB cable and wait for any required Mod edit: Malicious link removed. to install and the ID:COM section to turn blue like below.
    6. Click start to flash.
    7. Do not disconnect the cable or turn off the device once the flash has started, it will reboot when it finishes.

    *Note PDA/AP/CSC/CO/MODEM/etc
    • PDA refers to the build version of the software/firmware
    • Phone refers to the baseband/modem version
    • CSC is the consumer software customisation and is specific to geographical region and carriers. It contains the software packages specific to that region, carrier branding and also APN settings for data connection, MMS etc for your service provider.
    • .PIT refers to the partition information table you only need it if you screw up your partition table or if the firmware specifically requires it because of a change in the partition table layout. It's very likely you may never have to use this.
    If the package only contains one .tar archive then it will have everything, pda+phone+csc, in the one file.

    If it has multiple .tar archive then:
    The .tar with modem in the name is the phone/baseband bit of the package
    .tar with csc/multi-csc in the name is the CSC bit of the package
    .tar with code/PDA/AP in the name is the PDA/AP part of the firmware package


    odin.jpg


    SM-G930F G930FXXU1APAW, SM-G930F G930FXXU1APB4, SM-G930F G930FXXU1APB5, SM-G930F G930FXXU1APB6, SM-G930F G930FXXU1APB9
    1
    How did you fix the odin protocol version error I am getting the same thing
    Never did, i think it's because this phone is locked up BIG TIME by samsung and AT&T, i read this......
    http://forum.xda-developers.com/galaxy-s7/how-to/sad-news-galaxy-s7-look-buy-t3335723
    So im just sittin here twiddling my thumbs on stock trying to get over my flashaholic tendencies, wondering if i should take this thing back.
    1
    Can I install the CSC from a USA T-Mobile or ATT Firmware on an international model
    1
    So Samsung made a platform that is region locked. If I buy, lets say, T-Mobile's S7 and bring it with me to UK or South Korea, I won't be able to add any card from the country I just moved to. GENIUS!................