Samsung Gear Sport stuck on "Samsung Gear Sport" screen and would not boot

Ben Tran

New member
Mar 28, 2019
1
0
0
So, like the title suggest, i'am currently having a problem where my watch would refuse to boot up and will only go as far as the "Samsung Gear Sport" screen and would stay there, i have went on forums and looked at guides that suggested different things like entering recovery mode (which didn't work), letting it charge to 100% (which didn't work), and entering recovery mode while it's on the charging dock (which to my hopes and dreams, still refuses to work). I'm currently out of option and is looking for some help and support, so please if you could give me any tips and or suggestions, that would be very much appreciated.

Thank You
 

ejhdmbfan

New member
Nov 9, 2010
4
0
0
I'm in the same boat, but can't charge it. Every time I put it on charger I can get it to boot, but charger starts flashing after 1 minute and watch goes out. I've attached a photo of what it looks like but can't do much without power...any ideas? It started after sitting on a non-OEM charger for several hours and I think it cooked the battery



looks just like this except it's sm-r600:
https://forum.xda-developers.com/attachment.php?attachmentid=4258004&d=1504163631
 
Last edited:

AvitKori

New member
Dec 17, 2019
2
2
0
Similar issue with watch stuck at gear sport Logo

I am facing a similar issue where the watch gets stuck at the gear sport logo.

Sharing requested details below

PRODUCT NAME: SM-R600
CURRENT BINARY:Samsung Official
SYSTEM STATUS: Official
REACTIVATION LOCK: OFF

WARRANTY VOID: 0
AP SWREV:B:1 K:0 S:0

Thank you in advance.
 
  • Like
Reactions: adfree

adfree

Senior Member
Jun 14, 2008
8,898
5,145
243
@AvitKori

Check list...

A
Battery is full?
You can charge battery?

B
You allready check Reboot menu?..

Recovery... etc...

C
You could try to flash Firmware with netOdin...

Best Regards
 

AvitKori

New member
Dec 17, 2019
2
2
0
@AvitKori

Check list...

A
Battery is full?
You can charge battery?
--Yes it charged to 100%

B
You already check Reboot menu?..

Recovery... etc...
--Yes tried recovery. It just comes back to the same screen.

C
You could try to flash Firmware with netOdin...
--Where can I get the firmware for my watch.
--Also kindly share the steps to flash the firmware.
--Any risks flashing the firmware or per-requisites before flashing the firmware?
Best Regards
Thank you for your help.
 
  • Like
Reactions: adfree

adfree

Senior Member
Jun 14, 2008
8,898
5,145
243
Older SM-R600 Firmware:
https://www.file-upload.net/download-12796748/R600XXU1AQI8_OXA.zip.html

I have no other Link yet... feel free to search newer if you need...

B

Tool netOdin for Flashing... with some infos + Videos...

https://forum.xda-developers.com/showpost.php?p=73503787&postcount=150

C

Own risk!

In worst case... you can brick device...

Its 50/50 chance... :angel:

Few users have luck to bring device back to live... depend on why it fail...
Sometime less luck... if for instance Hardware or deeper Software problems...

Best Regards
 

Defavari

New member
Jan 16, 2020
1
0
0
Smart watch Gear 2 Samsung . Assistência técnica no ABC

Are you able to enter Download Mode and make Photo... like this... example:
https://forum.xda-developers.com/showpost.php?p=73607036&postcount=1

In this Odin screen usefull infos... ;)

Post result...so I could try to help.


If Download wireless Mode work...

My suggestion flash Firmware...with netOdin...

Best Regards
same thing happens with mine R720....already performed download firmware using Odin (no issues), but continues with the same freezed screen without reeboting
 

hoangnguyen_210892

New member
May 15, 2020
1
0
0
Hello guys,
I have same issue in my Samsung gear sport device. Its information
PRODUCT NAME: SM-R600
CURRENT BINARY:Samsung Official
SYSTEM STATUS: Official
REACTIVATION LOCK: OFF

WARRANTY VOID: 0
AP SWREV:B:1 K:0 S:0
I downloaded netOdin, but when rebooting then entering download wireless, it shows that "WPS mode not connected".
How can I do the next steps to solve this problem?
Thanks so much for your help.