Samsung Note 8 (SM-N950F) Sim not Detecting after 01-July-2020 Patch Update

[isurues]

HI Friends,

Please help me to sort my Samsung Note 8 (SM-N950F) Sim not Detecting after 01-July-2020 Patch Update.

Factory Reset it but still the same.
Re-seat the the Sim Tray ,Tried Different sims but still have the same issue.

Please help me

Thank you.

 

[vinaykdmp]

Exactly same thing happened today.

Same thing happened with me today.
I tried factory reset.
I also tried flashing latest rom using Odin but got system version mismatch error. device 11 binary 10
It's better to wait for next firmware update.
Can't even boot into recovery now.
Will get back if I get anything working again.

 

[abhi.2026.ynr]

sim not detected

Same issue with me. did all methods, but now stuck, have to wait for next update

 

[santoosh]

poor update , same issue iv been stuck from 4pm once the update kicked in.
Service centre too closes early cos of the pandemic.

Avoid the update for the guys who havent updated it. July patch india

 

[isurues]

please help us to at least rollback.

 

[BluePhnx]

please help us to at least rollback.

Have you tried flashing SCDTF1 FIRMWARE! That's the only firmware you can flash for now.

Look for either XEU OR BTU, don't worry about your CSC as long as you are using the multi-CSC OXM firmware your CSC will be supported.

 

[jazzydedania728]

Same issue here as well

Yes I did got same issue after update .... Contacted samsung but they dont have any solution .... pls keep all of us posted with the solution if any .... Actual problem is with IMEI number not displaying which prevents Network to come up .... this is what one of the samsung representative told me ....

Everyone pls keep posted for any update on this.

 

[isurues]

Have you tried flashing SCDTF1 FIRMWARE! That's the only firmware you can flash for now.

Look for either XEU OR BTU, don't worry about your CSC as long as you are using the multi-CSC OXM firmware your CSC will be supported.

I have tried N950FXXSCDTF1_N950FOXMCDTF1_BTU from Sammobile.
then it will be SW REV. Check fail(Bootloader) error due to latest version of BL

 

[chanchal.shohel]

Same thing happened with me today.
I tried factory reset.
I also tried flashing latest rom using Odin but got system version mismatch error. device 11 binary 10
It's better to wait for next firmware update.
Can't even boot into recovery now.
Will get back if I get anything working again.

try to flash ins firmware without csc (BL, Ap, CP).. phone will boot.. you can use with wifi... at least work without sim...

 

[nickme36]

try to flash ins firmware without csc (BL, Ap, CP).. phone will boot.. you can use with wifi... at least work without sim...

Tell me a thing if samsung will rollout an update for fixing this will sammobile get it at same time?

 

[hainguyenthao]

Just edit build.prop and flash AP file custom then it will be fixed no need to wait next update

 

[nickme36]

Can u explaing the process please

Just edit build.prop and flash AP file custom then it will be fixed no need to wait next update

Can u explain the process please

 

[kunal_07]

A new update has arrived. using samfirm to download it. Will update once I try Odin.

Edit: downloaded via samfirm and installed via odin. Back to normal!
ver N950FXXSDDTG5
no need to pay sammobile for fast speed. samfirm takes it directly from samsung server.

 

[abhi.2026.ynr]

New update rolled out on Sammobile. have downloaded it, by paying 300rs. from paypal for fast download. phone is working fine. download the update of 29/07/2020.


Xda doesnt allow new users to post link. so u have to check on its page.

 

[Amijaz]

Same thing happened with me today.
I tried factory reset.
I also tried flashing latest rom using Odin but got system version mismatch error. device 11 binary 10
It's better to wait for next firmware update.
Can't even boot into recovery now.
Will get back if I get anything working again.

Your update section is functional? I can't even search for the updates, throws can't connect error!

 

[nickme36]

Your update section is functional? I can't even search for the updates, throws can't connect error!

Have you updated? With the latest rom

---------- Post added at 05:53 AM ---------- Previous post was at 05:48 AM ----------

A new update has arrived. using samfirm to download it. Will update once I try Odin.

Edit: downloaded via samfirm and installed via odin. Back to normal!
ver N950FXXSDDTG5
no need to pay sammobile for fast speed. samfirm takes it directly from samsung server.

Thankyou for updating, really appriciated.

 

[Amijaz]

Have you updated? With the latest rom

---------- Post added at 05:53 AM ---------- Previous post was at 05:48 AM ----------


Thankyou for updating, really appriciated.

Finally, flashed the latest fixed firmware. My eyes opened when the VoLTE icon appeared during the setup. Back to normal! Thank god.

 

[jazzydedania728]

A new update has arrived. using samfirm to download it. Will update once I try Odin.

Edit: downloaded via samfirm and installed via odin. Back to normal!
ver N950FXXSDDTG5
no need to pay sammobile for fast speed. samfirm takes it directly from samsung server.

Can I do this at home without visiting service centre ??

Will I lose data after you apply this update ? I mean do I need to do factory reset to apply this latest update ??

 

[jazzydedania728]

Official process which Samsung told me to do

NOTE:-

We do not have confirmation regarding WILL DATA BE LOST OR NOT

STEP 1:-

Kindly follow these steps Phone should be in Switch OFF state, follow the procedure as below: Long press “Volume Down + Power Key + Bixby Key”

STEP 2:-

After warning message will be displayed as shown in above image. Press the Volume up button and device will go to same state as shown. Connect the phone to laptop/desktop via USB Cable.

STEP 3:-

Click on the link and download 2 files in one Folder https://www.mediafire.com/folder/o2u26wfcpdz68/

STEP 4:-

After that Install Smart switch application in laptop/desktop before proceeding further (https://www.samsung.com/in/support/smart-switch/)

STEP 5:-

Connect device with laptop/desktop using USB cable

STEP 6:-

Double click “N950FXXSDDTG5” exe file which is downloaded from the link

STEP 7:-

After that Tool will be opened as shown below. Click “Start” Button

STEP 8:-

If “Pass” is displayed on tool screen as below then device will return to home screen after some time.

 

[Rulinglionadi]

has anyone tried this method? please let me know if its working

---------- Post added at 05:11 PM ---------- Previous post was at 05:09 PM ----------

NOTE:-

We do not have confirmation regarding WILL DATA BE LOST OR NOT

STEP 1:-

Kindly follow these steps Phone should be in Switch OFF state, follow the procedure as below: Long press “Volume Down + Power Key + Bixby Key”

STEP 2:-

After warning message will be displayed as shown in above image. Press the Volume up button and device will go to same state as shown. Connect the phone to laptop/desktop via USB Cable.

STEP 3:-

Click on the link and download 2 files in one Folder https://www.mediafire.com/folder/o2u26wfcpdz68/

STEP 4:-

After that Install Smart switch application in laptop/desktop before proceeding further (https://www.samsung.com/in/support/smart-switch/)

STEP 5:-

Connect device with laptop/desktop using USB cable

STEP 6:-

Double click “N950FXXSDDTG5” exe file which is downloaded from the link

STEP 7:-

After that Tool will be opened as shown below. Click “Start” Button

STEP 8:-

If “Pass” is displayed on tool screen as below then device will return to home screen after some time.

The link seems very fishy, should i trust this or report it.