Samsung S9 SM-G960U1 Android 10 Update ?

[BoxEstil]

Hi,
XDA Community

So my inquiry today, is that
i realised samsung has just roll out the Android 10 Update for S9 devices, on Feb 2
but my phone is not getting updated yet via OTA, like always

I had no problem getting Android 9 (Pie) when it released.

but now, i am so confused, why my phone is not getting the update.

Well, i looked into SAMMOBILE official page, and some carriers of my model [SM-G960U1]
have already the Android 10 Update,

so my question here is, wich one of those sammobile.com - samsung - galaxy-s9 -firmware - #SM-G960U1]
, is my correct update or firmware

i figure out is the Uknown (XAA) Version [sammobile.com - samsung- galaxy-s9 - firmware - SM-G960U1 - XAA - download - G960U1UEU7DTA5 - 314846], but i need to be sure

so here we are, i need some help to get the correct firmware for my S9.

The things is that the PDA and CSC are the same on each Carrier, and is difficult to identify
i never had that issue with previous phones like S6, S3 or S7.

also, i looked into IME PAGE INFO, and says that is : XAG Version -> IMEI.info: CSC XAG

so, that confuse me.

NOTE: AND not MY Phone is not Rooted, i keep it official since i bought it.

so for you, i have the ADB Lines: of my S9 Phone:

[ril.debug.ntc]: [M:VZW, S:TFN, T:CDM, C:USA]
[ril.region_props]: [TFN.TFN]
[ril.product_code]: [SM-G960UZKATFN]
[ro.boot.carrierid]: [XAA]
[ro.boot.em.model]: [SM-G960U1]
[ro.boot.sales_code]: [TFN]
[ro.bootloader]: [G960U1UES7CSK2]
[ro.build.PDA]: [G960U1UES7CSK2]
[ro.build.display.id]: [PPR1.180610.011.G960U1UES7CSK2]
[ro.build.product]: [starqlteue]
[ro.carrier]: [unknown]

AND Thats all
very grateful that you can help me
I will appreciate it a lot

 

[RSG0123]

Hi,
XDA Community

So my inquiry today, is that
i realised samsung has just roll out the Android 10 Update for S9 devices, on Feb 2
but my phone is not getting updated yet via OTA, like always

I had no problem getting Android 9 (Pie) when it released.

but now, i am so confused, why my phone is not getting the update.

Well, i looked into SAMMOBILE official page, and some carriers of my model [SM-G960U1]
have already the Android 10 Update,

so my question here is, wich one of those sammobile.com - samsung - galaxy-s9 -firmware - #SM-G960U1]
, is my correct update or firmware

i figure out is the Uknown (XAA) Version [sammobile.com - samsung- galaxy-s9 - firmware - SM-G960U1 - XAA - download - G960U1UEU7DTA5 - 314846], but i need to be sure

so here we are, i need some help to get the correct firmware for my S9.

The things is that the PDA and CSC are the same on each Carrier, and is difficult to identify
i never had that issue with previous phones like S6, S3 or S7.

also, i looked into IME PAGE INFO, and says that is : XAG Version -> IMEI.info: CSC XAG

so, that confuse me.

NOTE: AND not MY Phone is not Rooted, i keep it official since i bought it.

so for you, i have the ADB Lines: of my S9 Phone:



AND Thats all
very grateful that you can help me
I will appreciate it a lot

Same exact Model and build as you.. and same situation too.. Did you by any chance purchase this from Amazon back when it was like 300 off? I too am looking for the right download.. and perhaps @ better than 50kbs

 

[BoxEstil]

Same exact Model and build as you.. and same situation too.. Did you by any chance purchase this from Amazon back when it was like 300 off? I too am looking for the right download.. and perhaps @ better than 50kbs

I bought it, here on my country when S9 just release
but i think, not sure 100%, thats our phones are TFN Version>
Service provider SW ver.
SAOMC_SM-G960U1_OYM_TFN_PP_0031
TFN/TFN/XAA

So, in sammobile TFN version still on Amdroid 9
TFN VERSION STILL ON beta
i found a intersting post, thats says

so, TMB (T-MOBILE) JUST RELEASE yesterday the update, so for TFN, we need to wait a little bit more until all get ready
i think, i just will wait some weeks more, if not, i will change my phone to XAA Firmware.

hope, this will help you

 

[longebane]

Too bad tmo's s9 update has been delayed, released date... "TBA"

 

[secondlight]

install samsung smart switch app in both android and PC. connect through USB. in PC smart switch desktop app, it will prompt you with new OS update.
just manually install from your PC.

 

[TheMadScientist]

Tfn is TracFone. Xaa is unbranded the update hasn't been released for all carriers yet

 

[Roneash]

SM-G960U1

Hi,
XDA Community

So my inquiry today, is that
i realised samsung has just roll out the Android 10 Update for S9 devices, on Feb 2
but my phone is not getting updated yet via OTA, like always

I had no problem getting Android 9 (Pie) when it released.

but now, i am so confused, why my phone is not getting the update.

Well, i looked into SAMMOBILE official page, and some carriers of my model [SM-G960U1]
have already the Android 10 Update,

so my question here is, wich one of those sammobile.com - samsung - galaxy-s9 -firmware - #SM-G960U1]
, is my correct update or firmware

i figure out is the Uknown (XAA) Version [sammobile.com - samsung- galaxy-s9 - firmware - SM-G960U1 - XAA - download - G960U1UEU7DTA5 - 314846], but i need to be sure

so here we are, i need some help to get the correct firmware for my S9.

The things is that the PDA and CSC are the same on each Carrier, and is difficult to identify
i never had that issue with previous phones like S6, S3 or S7.

also, i looked into IME PAGE INFO, and says that is : XAG Version -> IMEI.info: CSC XAG

so, that confuse me.

NOTE: AND not MY Phone is not Rooted, i keep it official since i bought it.

so for you, i have the ADB Lines: of my S9 Phone:



AND Thats all
very grateful that you can help me
I will appreciate it a lot

I have this same device. Was on android 9 and now upgraded to 10. I have being faced with random freezes and reboots since android 9 and now in 10. Sometimes oneui even crashes. I have successfully flashed the CSC: XAA firmware (android 10) to this phone and it is the same prob. Random freezes and reboots. Any idea or advice?