Samsung SM-P905 LTE 12.20 -- Dead Or bricked

[soneries]

Hello every one,

I got my Samsung 905 stuck some kind of mode, its not going to power on, no light , only when I am connecting usb,,,, Now its in RELINK-HS USB QD LOADER 9008 ( COM10) , kindly help me to get the Tablet back,,,,, I have same model in white color ,,, is it possible to colone all software data and put in this tablet to work,,,, I am not mobile guy,,,,kindly help me in easy steps,,, so I can do it,,,, one more thing,,,, when I will reconnect the usb,,, it will try to install USB driver but will say in end,, USB not recognized,,, I am on window 8.10 ,, tablet has some time of MSM8960 thing,, have installed already kies 3 and Samsung usb drivers,,

thanks you in advance,,

 

[Beut]

You should use this tool to verify that your USB port is working, when charging it should read at least 5 volts, 1.7 Amps
http://www.ebay.com/sch/i.html?_fro...rger+Current+Voltage+Detector+Tester&_sacat=0

When pressing the home button, it should show the green battery icon which indicates it's charging, similar like this

You may change the USB port flex cable, cost only under $10, assume you know how to open the rear cover

 

[soneries]

Hi, yes I did changed flex cable but it's stays same ,, now I will try new USB port ,,,, if still same will let you know ,, thank you for your reply, ,,,

 

[ADM!RAL]

Why did it happen? Were you trying to flash firmware and something stopped it before completion?
About the problem I think you can search "how to recover Qualcomm 800 device"
Devs call this problem hard brick

 

[soneries]

hello,

its was working fine,,, since its dropped and screen shattered , no more power now wake up now,,, it was connected to odin one time only, right after its dropped down, I read info from net had it in odin mode,,, my firmware was

P905XXUABOK3_P905XSAABOK2_XSA

so odin started and awaited for set up connection,,,,,,,, I removed usb and plug it again,, from there its went to deep sleep,,, I read many blog and help,,, honestly speaking I have no idea about these technical recovery things,, but in few days I understand bit,, I just need right direction to wake tablet up, if its possible,

so again I connect than its show under USB-Bulk sort of thing,,, which I manage to update the driver and now device in Under port

Ports( Com & LPT )
-> Relink HS-USB QDLoader 9008(COM10)

I have no idea what to do next,, I read many blogs help thing, but nothing work,,,, I have changed flex usb cable, usb ,, de-assumble whole tablet and reset again,, but all in end same where I am in stuck,,,,,,,

Ports( Com & LPT )
-> Relink HS-USB QDLoader 9008(COM10)

one more thing, I don't have screen working,,,, so not visibility available,,,, hopefully you genius will help me out to learn and over come such problem,,, thank you in advance

 

[ADM!RAL]

hello,

its was working fine,,, since its dropped and screen shattered , no more power now wake up now,,, it was connected to odin one time only, right after its dropped down, I read info from net had it in odin mode,,, my firmware was

P905XXUABOK3_P905XSAABOK2_XSA

so odin started and awaited for set up connection,,,,,,,, I removed usb and plug it again,, from there its went to deep sleep,,, I read many blog and help,,, honestly speaking I have no idea about these technical recovery things,, but in few days I understand bit,, I just need right direction to wake tablet up, if its possible,

so again I connect than its show under USB-Bulk sort of thing,,, which I manage to update the driver and now device in Under port

Ports( Com & LPT )
-> Relink HS-USB QDLoader 9008(COM10)

I have no idea what to do next,, I read many blogs help thing, but nothing work,,,, I have changed flex usb cable, usb ,, de-assumble whole tablet and reset again,, but all in end same where I am in stuck,,,,,,,

Ports( Com & LPT )
-> Relink HS-USB QDLoader 9008(COM10)

one more thing, I don't have screen working,,,, so not visibility available,,,, hopefully you genius will help me out to learn and over come such problem,,, thank you in advance

Strange!
I don't think dropping the tablet could cause hard brick like that !!
Reviving a device without step by step guide could be really hard.
I would suggest that you take it to a service center.
Sorry for being unable to help bro ?