[ SCRIPT | TWEAK ] ◢ Project Fluid™ ◣ | 20.10.2013

Search This thread

Spex

Senior Member
Oct 8, 2011
2,235
2,403
Zagreb
87493346.png

32086164.png
Fluid UI | Lagless gaming | Battery friendly | Multitasking
32086164.png

Project Fluid is latest project im working on.
It consists from build.prop tweaks and init.d tweaks.
This is also a discussion thread you can always suggest me something.

If this project helped you in any way feel free to rate this thread 5* and thank me its free. Also comment how is your phone feeling with Project Fluid

32086164.png

NAVIGATION | Build.prop | Script | Other

32086164.png
CREDITS:
  • zeppelinrox
  • pikachu01
  • iONEx
  • LENAROX
  • smokin1337
  • imbawind
  • slaid480
  • smokin1337
  • [email protected]
  • darky
  • lpy
  • totiadrenalin
  • lambgx02
  • doomlord
  • Hero
  • if you think you should be here send me PM
 
Last edited:

Spex

Senior Member
Oct 8, 2011
2,235
2,403
Zagreb
32086164.png

Navigation | BUILD.PROP | Script | Other

32086164.png

REQUIREMENTS:
  • rooted phone
  • android 2.3+

INSTALLATION:
  • A)
    1. Open "Root Explorer" and click the R/W
    2. Go to /system/build.prop
    3. Backup yout current build.prop
    4. Long-press on Build.Prop and you’ll see a pop up
    5. Text Editor
    6. Type in those few line of words below into the last line of the text then save
    7. reboot and enjoy
  • B)
    1. Open "Root Explorer" and click R/W
    2. Go to /system and copy build.prop to your sd card
    3. Copy build.prop to your pc
    4. Move build.prop again to /system and change permission

TWEAKS:​

Qualcomm specific tweaks. Might cause reboot on other.
Code:
com.qc.hardware=1
debug.qc.hardware=true
debug.qctwa.preservebuf=1
debug.qctwa.statusbar=1
Unlock fps limit
Code:
debug.egl.swapinterval=0
Render UI with GPU and GPU tweaks
Code:
debug.composition.type=gpu
debug.egl.hw=1
debug.sf.hw=1
ro.sf.compbypass.enable=0
#enable harware egl profile
debug.egl.profiler=1
#Enable tile rendering
debug.enabletr=true
persist.sys.composition.type=gpu
#16BIT transparency , Smother Scrolling
persist.sys.use_16bpp_alpha=1
#3d performance
persist.android.strictmode=0
ro.min_pointer_dur=1
ro.secure=0
Fluid UI
Code:
persist.service.lgospd.enable=0
persist.service.pcsync.enable=0
Device supports EHRPD
Code:
ro.config.ehrpd=true
System prop for tethering denied
Code:
ro.tether.denied=false
Possible screen glitch fix
Code:
debug.gr.numframebuffers=3
Disable boot animation for faster boot
Code:
debug.sf.nobootanimation=1
Disable debugging notify icon on statusbar
Code:
persist.adb.notify=0
Enable Hardware 3D
Code:
hw3d.force=1
Phone will not wake up from hitting the volume rocker
Code:
ro.config.hwfeature_wakeupkey=0
Unlock phone by menu key
Code:
ro.config.hw_menu_unlockscreen=false
Save power while phone is in sleep mode
Code:
ro.ril.disable.power.collapse=1
Ringtone rings without delay
Code:
ro.telephony.call_ring.delay=0
The wifi scan interval in seconds so you can use a lower or higher value.
Code:
wifi.supplicant_scan_interval=180
Better scrolling responsiveness
Code:
windowsmgr.max_events_per_sec=90
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
Better touchscreen responsiveness
Code:
touch.pressure.scale=0.001
Support for ipv4 and ipv6.
Code:
persist.telephony.support.ipv4=1
persist.telephony.support.ipv6=1
Faster boot
Code:
persist.sys.shutdown.mode=hibernate
ro.config.hw_quickpoweron=true
Better battery life
Code:
ro.config.hw_fast_dormancy=1
ro.config.hw_power_saving=true
Enable 16 BIT
Code:
debug.fb.rgb565=1
VM tweak
Code:
ro.vold.umsdirtyratio=20
Disable Zygote loader
Code:
ro.wmt.blcr.enable=0
Better in call voice quality
Code:
ro.ril.enable.amr.wideband=1
Signal Tweaks
Code:
persist.cust.tel.eons=1
ro.ril.gprsclass=10
ro.ril.hsdpa.category=8
ro.ril.hsupa.category=6
ro.ril.hsxpa=1
Wireless Speed Tweaks
Code:
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.route.flush=1
net.ipv4.tcp_ecn=0
net.ipv4.tcp_fack=1
net.ipv4.tcp_mem=187000 187000 187000
net.ipv4.tcp_moderate_rcvbuf=1
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp_rfc1337=1
net.ipv4.tcp_rmem=4096 39000 187000
net.ipv4.tcp_sack=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_window_scaling=1
net.ipv4.tcp_wmem=4096 39000 187000
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
Website Bypass
Code:
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
Graphics Enhancement
Code:
#Raise photo and video recording quality
ro.media.enc.hprof.vid.bps=8000000
ro.media.enc.hprof.vid.fps=75
#Raise JPG quality to 100%
ro.media.enc.jpeg.quality=100
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
ro.media.cam.preview.fps=0
ro.media.codec_priority_for_thumb=so
DalvikVM
Code:
dalvik.gc.type=precise 
dalvik.vm.dexopt-data-only=1
#Enables register map for tracking objects to garbage collect. Might give a little more RAM at the cost of a few CPU cycles.
dalvik.vm.dexopt-flags=m=v,o=y
dalvik.vm.jniopts=forcecopy
dalvik.vm.lockprof.threshold=500
dalvik.vm.stack-trace-file=/data/anr/traces.txt
dalvik.vm.verify-bytecode=false
Unknown functions
Code:
debug.kill_allocating_task=0
debug.overlayui.enable=0
dev.pm.dyn_samplingrate=1
ENFORCE_PROCESS_LIMIT=false
persist.sampling_profiler=0
ro.debuggable=1
ro.config.disable.hw_accel=false
ro.fb.mode=1
Not working
Code:
#debug.performance.tuning=1
#video.accelerate.hw=1
#persist.sys.ui.hw=1
#dalvik.vm.checkjni=false
#dalvik.vm.execution-mode=int:jit
#dalvik.vm.heapgrowthlimit=48m
#dalvik.vm.heapsize=64m
#Raise photo and video recording quality
#ro.media.dec.jpeg.memcap=20000000
#Enable surface dithering
#persist.sys.use_dithering=0
#Allow purging of assets
#persist.sys.purgeable_assets=0
#Force launcher into memory
#ro.HOME_APP_ADJ=1
# Disables data sent and logging.Only for HTC
#profiler.force_disable_err_rpt=1
#profiler.force_disable_ulog=1
#ro.config.nocheckin=1
#sleep mode for battery savings. 0 power collapse suspend, 1 power collapse (best), 2 apps go to sleep, 3 show clock and wait, 4 wait for interrupt
#pm.sleep_mode=1
#Fix some application issues/Disable kernel error logging
#ro.kernel.android.checkjni=0
#ro.kernel.checkjni=0
 
Last edited:

Spex

Senior Member
Oct 8, 2011
2,235
2,403
Zagreb
32086164.png

Navigation | Build.prop | SCRIPT | Other

32086164.png

REQUIREMENTS:
  • rooted phone
  • android 2.3+
  • kernel/rom with init.d support
  • 5mb free in system
  • busybox

FEATURES:
  • VM tweaks | better battery life and performance
  • SD card tweaks | faster sd card read and write and mount speed
  • Full GPU rendering | Removes the android cpu rendering so the system can only use the gpu for rendering
  • Darky zipaling | Will zipalign all apk files to increase performance and reduce memory consumption
  • Battery tweaks | Tweaks that improve power consumpion
  • Kernel tweaks | better battery life and performance
  • Internet speed tweaks | Improves general browsing speed
  • disable logger | Disables the Android logger
  • Hacked host | ad-free browsing and applications
  • Reduced /dbdata, /data, /sdcard usage of *.db files and faster database access
  • IO scheduler tweaks
  • Cache cleared at every boot
  • It backups your old init.d scripts
  • Various tweaks
  • Manny other (scroll down)

INSTALLATION:
  • copy it on your sd card
  • go to recovery mod
  • flash it
  • reboot
  • enjoy

DOWNLOADS:
CHANGELOG:
Code:
[LIST][*][SIZE="5"]v1:[/SIZE][SIZE="4"][LIST]
[*]initial release
[/LIST][/SIZE]
[*][SIZE="5"]v1.1[/SIZE]
[SIZE="4"][LIST]
[*]flashable .zip
[*]entropy seeder generator fixed
[*]removed touchscreen tweak (only samsung phone)
[*]now script will backup you old init.d script in /sdcard/Fluid_engine
[/LIST][/SIZE]
[*][SIZE="5"]v1.2[/SIZE]
[SIZE="4"][LIST]
[*]fixes
[/LIST][/SIZE]
[*][SIZE="5"]v1.3[/SIZE]
[SIZE="4"][LIST]
[*]fixes
[/LIST][/SIZE]
[*][SIZE="5"]v2[/SIZE]
[SIZE="4"][LIST]
[*]updated mpengine
[*]live entropy seeder
[*]removed some double lines 
[*]changed some values
[/LIST][/SIZE]
[*][SIZE="5"]v3[/SIZE]
[SIZE="4"][LIST]
[*]fixes
[*]removed default scheduler
[*]hacked host for no ads
[*]various changes
[*]removed rpengine only cause it gets many updates and this way it will be easier for people to update it
[*]fully compatible with RPEngine, supercharger, seeder, crossbreder
[/LIST][/SIZE]
[*][SIZE="5"]v3.1[/SIZE]
[SIZE="4"][LIST]
[*]bug fixes [some values didnt apply]
[*]new values
[/LIST][/SIZE]
[*][SIZE="5"]v3.2[/SIZE]
[SIZE="4"][LIST]
[*]bug fixes
[*]new values
[*]removed renice apps
[*]now you are going to have more free ram
[*]since of more free ram your battery life will be better
[/LIST][/SIZE]
[/LIST]
 
Last edited:

Spex

Senior Member
Oct 8, 2011
2,235
2,403
Zagreb
32086164.png


32086164.png

OPTIONAL:
  • Governor tweaks from thunderbolt script
    remove .txt extension
    move this to system/etc/init.d
    set permission
  • Disable journalism
    remove .txt extension
    move this to system/etc/init.d
    set permission
  • tweak for general apps to open instantly (ram usage might be higher)
    remove .txt extension
    move this to system/etc/init.d
    set permission
    removes lag from keyboard, phone, superuser and other most used apps
  • sqlite for gb/ics
    remove .txt extension
    move this to system/xbin
    set permission
  • sqlite for jb
    you move this to system/xbin
  • vsync activator
    flash this zip
    VSync synchronizes things. It tells the GPU to wait for the screen to finish its line by line drawing before loading the next frame.
    The VSync pulse is now used to start all the processing for the next frame.
  • Fluid Libs
    flash this zip
    xperia 2011 devices only
    collection of newest xperia libs
    xperia T jelly bean libs, xperia S modified adreno libs, new egl libs, xperia V/T sound libs

INSTALLATION:
  1. Copy it on your sd card
  2. move to right place
  3. set permission
  4. reboot

EXPLANATIONS:
  • vm/block_dump
    This enables block I/O debugging when set to a nonzero value. If you want to find out which process caused the disk to spin up (see /proc/sys/vm/laptop_mode), you can gather information by setting the flag.
    When this flag is set, Linux reports all disk read and write operations that take place, and all block dirtyings done to files. This makes it possible to debug why a disk needs to spin up, and to increase battery life even more. The output of block_dump is written to the kernel output, and it can be retrieved using "dmesg". When you use block_dump and your kernel logging level also includes kernel debugging messages, you probably want to turn off klogd, otherwise the output of block_dump will be logged, causing disk activity that is not normally there.
  • vm/dirty_background_bytes
    Contains the amount of dirty memory at which the pdflush background writeback daemon will start writeback.
    If dirty_background_bytes is written, dirty_background_ratio becomes a function of its value (dirty_background_bytes / the amount of dirtyable system memory).
  • vm/dirty_background_ratio
    Contains, as a percentage of total system memory, the number of pages at which the pdflush background writeback daemon will start writing out dirty data.
  • vm/dirty_bytes
    Contains the amount of dirty memory at which a process generating disk writes will itself start writeback.
    If dirty_bytes is written, dirty_ratio becomes a function of its value (dirty_bytes / the amount of dirtyable system memory).
    Note: the minimum value allowed for dirty_bytes is two pages (in bytes); any value lower than this limit will be ignored and the old configuration will be retained.
  • vm/dirty_expire_centisecs and vm/dirty_writeback_centisecs
    expire:
    How old "dirty" data should be before the kernel considers it old enough to be written to disk. It is expressed in 100ths of a second.
    writeback:
    This is the interval of when the writeback daemons periodically wake up and write "old" data out to disk. It is expressed in 100ths of a second.
  • vm/dirty_ratio
    Contains, as a percentage of total system memory, the number of pages at which a process which is generating disk writes will itself start writing out dirty data.
  • vm/drop_caches
    Writing to this will cause the kernel to drop clean caches, dentries and inodes from memory, causing that memory to become free.

    To free pagecache:

    echo 1 > /proc/sys/vm/drop_caches

    To free dentries and inodes:

    echo 2 > /proc/sys/vm/drop_caches

    To free pagecache, dentries and inodes:

    echo 3 > /proc/sys/vm/drop_caches

    As this is a non-destructive operation, and dirty objects are not freeable, the user should run "sync" first in order to make sure all cached objects are freed.
  • vm/laptop_mode
    laptop_mode is a knob that controls "laptop mode". When the knob is set, any physical disk I/O (that might have caused the hard disk to spin up, see /proc/sys/vm/block_dump) causes Linux to flush all dirty blocks. The result of this is that after a disk has spun down, it will not be spun up anymore to write dirty blocks, because those blocks had already been written immediately after the most recent read operation. The value of the laptop_mode knob determines the time between the occurrence of disk I/O and when the flush is triggered. A sensible value for the knob is 5 seconds. Setting the knob to 0 disables laptop mode.
  • vm/lowmem_reserve_ratio
    Ratio of total pages to free pages for each memory zone.
  • vm/max_map_count
    This file contains the maximum number of memory map areas a process may have. Memory map areas are used as a side-effect of calling malloc, directly by mmap and mprotect, and also when loading shared libraries.
    While most applications need less than a thousand maps, certain programs, particularly malloc debuggers, may consume lots of them, e.g., up to one or two maps per allocation.
    The default value is 65536.
  • vm_min_free kbytes
    This is used to force the Linux VM to keep a minimum number of kilobytes free. The VM uses this number to compute a pages_min value for each lowmem zone in the system. Each lowmem zone gets a number of reserved free pages based proportionally on its size.
  • vm/mmap_min_addr
    This file indicates the amount of address space which a user process will be restricted from mmaping. Since kernel null dereference bugs could accidentally operate based on the information in the first couple of pages of memory userspace processes should not be allowed to write to them.
    By default this value is set to 0 and no protections will be enforced by the security module. Setting this value to something like 64k will allow the vast majority of applications to work correctly and provide defense in depth against future potential kernel bugs.
  • vm/nr_pdflush_threads
    The count of currently-running pdflush threads. This is a read-only value.
  • vm/oom_dump_tasks
    Enables a system-wide task dump (excluding kernel threads) to be produced when the kernel performs an OOM-killing and includes such information as pid, uid, tgid, vm size, rss, cpu, oom_adj score, and name. This is helpful to determine why the OOM killer was invoked and to identify the rogue task that caused it.
    If this is set to zero, this information is suppressed. On very large systems with thousands of tasks it may not be feasible to dump the memory state information for each one. Such systems should not be forced to incur a performance penalty in OOM conditions when the information may not be desired.
    If this is set to non-zero, this information is shown whenever the OOM killer actually kills a memory-hogging task.
    The default value is 0.
  • vm/oom_kill_allocating_task
    This enables or disables killing the OOM-triggering task in out-of-memory situations.
    If this is set to zero, the OOM killer will scan through the entire tasklist and select a task based on heuristics to kill. This normally selects a rogue memory-hogging task that frees up a large amount of memory when killed.
    If this is set to non-zero, the OOM killer simply kills the task that triggered the out-of-memory condition. This avoids the expensive tasklist scan.
    If panic_on_oom is selected, it takes precedence over whatever value is used in oom_kill_allocating_task.
    The default value is 0.
  • vm overcommit memory
    This controls overcommit of system memory, possibly allowing processes to allocate (but not use) more memory than is actually available.
    0 - Heuristic overcommit handling. Obvious overcommits of address space are refused. Used for a typical system. It ensures a seriously wild allocation fails while allowing overcommit to reduce swap usage. root is allowed to allocate slighly more memory in this mode. This is the default.
    1 - Always overcommit. Appropriate for some scientific applications.
    2 - Don't overcommit. The total address space commit for the system is not permitted to exceed swap plus a configurable percentage (default is 50) of physical RAM. Depending on the percentage you use, in most situations this means a process will not be killed while attempting to use already-allocated memory but will receive errors on memory allocation as appropriate.
  • vm overcommit ratio
    Percentage of physical memory size to include in overcommit calculations.
    Memory allocation limit = swapspace + physmem * (overcommit_ratio / 100)
    swapspace = total size of all swap areas
    physmem = size of physical memory in system
  • vm/page-cluster
    This controls the number of pages which are written to swap in a single attempt. The swap I/O size.
    It is a logarithmic value - setting it to zero means "1 page", setting it to 1 means "2 pages", setting it to 2 means "4 pages", etc.
    The default value is three (eight pages at a time). There may be some small benefits in tuning this to a different value if your workload is swap-intensive.
  • vm/panic_on_oom
    This enables or disables panic on out-of-memory feature. If this is set to 1, the kernel panics when out-of-memory happens. If this is set to 0, the kernel will kill some rogue process, by calling oom_kill().
    Usually, oom_killer can kill rogue processes and system will survive. If you want to panic the system rather than killing rogue processes, set this to 1.
    The default value is 0.
    Panic is a system error that is detected by the kernel.
  • vm/percpu_pagelist_fraction
    This is the fraction of pages at most (high mark pcp->high) in each zone that are allocated for each per cpu page list. The min value for this is 8. It means that we don't allow more than 1/8th of pages in each zone to be allocated in any single per_cpu_pagelist. This entry only changes the value of hot per cpu pagelists. User can specify a number like 100 to allocate 1/100th of each zone to each per cpu page list.
    The batch value of each per cpu pagelist is also updated as a result. It is set to pcp->high / 4. The upper limit of batch is (PAGE_SHIFT * 8).
    The initial value is zero. Kernel does not use this value at boot time to set the high water marks for each per cpu page list.
  • vm/scan_unevictable_pages
    When written to, this tunable will initiate a scan of individual or all zones' unevictable lists and move any pages that have become evictable onto the respective zone's inactive list, where shrink_inactive_list() will deal with them. If evictable pages are found in unevictable lru, kernel will print filenames and file offsets of those pages.
  • vm/swappiness
    swappiness is a parameter which sets the kernel's balance between reclaiming pages from the page cache and swapping process memory. The default value is 60.
    If you want kernel to swap out more process memory and thus cache more file contents increase the value. Otherwise, if you would like kernel to swap less decrease it.
    more information
  • vm vfs cache presure
    Now here is where it gets interesting! File system cache (dentry/inode) is really more important than the block cache above in dirty ratio and dirty background ratio, so we really want the kernel to use up much more of the RAM for file system cache, this will increas the performance of the system without sacrificing performance at the application level. The default value is 100, as a percentage, and what you want to do is lower the value to tell the kernel to favor the file system cache and not drop them aggressively.

LINKS TO IMPORTANT THREADS:
BANNERS:
45136940.png

whiteholom.png

blackoi.png
 
Last edited:

Spex

Senior Member
Oct 8, 2011
2,235
2,403
Zagreb
great!
I think you almost categorized all existing build.prop tweaks on the net... the list just goes on and on :p joking!
If you should need any help....

keep it up! :)

I did like 30 reboots to test those tweaks
i commented out tweaks which dont work on ics
every group is in alphabetical order
no double lines

i plan to explain lines and which values can we use
but first need to finish script :)
 
  • Like
Reactions: hmnk and baran0119

Spex

Senior Member
Oct 8, 2011
2,235
2,403
Zagreb
OK, I opened up those two guides and with triumphant smile I started to check which one of BUSTED ones appear in your tweak and you've already commented them! no fun for me :(

:p
this really took time to organize it, remove every double line, to comment not working ones
and i did reboot for every new line (something like 30 reboots)

this one was ment for ics
later i will add gb and jb

but first i will finish script
Fluid Engine
 

najodleglejszy

Senior Member
Apr 21, 2012
620
211
:p
this really took time to organize it, remove every double line, to comment not working ones
and i did reboot for every new line (something like 30 reboots)

this one was ment for ics
later i will add gb and jb

but first i will finish script
Fluid Engine

well, big plus for not copying placebo tweaks :) it really shows that you care, so I can't wait to see the full mod released!
I mean, of course I can, take your time to polish it ;)
 

iONEx

Senior Member
Feb 13, 2012
695
666
Dubrovnik
goo.gl
hey buddy,

you might wanna check this line: ro.telephony.call_ring.delay=0

I've found out, atleast on GB that it causes this bug with ringtones not repeating.
If you get a call, the ringtone rings one time only and stops.

Don't know about ICS, but just to be sure test it ;)
 

Spex

Senior Member
Oct 8, 2011
2,235
2,403
Zagreb
hey buddy,

you might wanna check this line: ro.telephony.call_ring.delay=0

I've found out, atleast on GB that it causes this bug with ringtones not repeating.
If you get a call, the ringtone rings one time only and stops.

Don't know about ICS, but just to be sure test it ;)

ok thanks for info
i will check that tommorow
working on something else now
_________
Actually that line was ment for that
i will update op with info
 
Last edited:
  • Like
Reactions: Ikmalblack95

Spex

Senior Member
Oct 8, 2011
2,235
2,403
Zagreb
Final stage just few more things do:
i need to see if there are any double lines and such

what it offers you?
-- all things from unlimited boost but with no double lines, better values and new tweaks
-- i included some things from lazerdroid which werent included
-- full gpu rendering (fluid ui, smoother gaming)

it will have few optional tweaks which u can flash later:
-- disable journalism
-- governor tweaks (for users with custom kernel)
-- tweak for most used apps to open faster

in updates i will search for better values, and new lines
i think i wont need to do rework it again cause it organized very well
_________________
testing stage
 
Last edited:
  • Like
Reactions: Ikmalblack95

Spex

Senior Member
Oct 8, 2011
2,235
2,403
Zagreb
Comparision:
*all test are on hyouka

1.With project fluid build.prop tweaks+gpu rendering+adreno.config tweaks
gaming is preety smooth (in 2min of gaming no lags only one minor almost which was almost unnoticable)
but it took long time for game 2 load
ui is preety smooth and fluid 2.
game tested was subway surfers

2. with fluid engine and previous tweaks
phone boots faster, gaming is even smoother
game has loaded for 2sec (showed image)

3.test will be soon with all optional tweaks

it will be released today (i hope)
i still have some things to finish but first i want to relax cause i was working on it from 19:00 until 2:00
and today for 3 hours
 
Last edited:
  • Like
Reactions: najodleglejszy

Top Liked Posts

  • There are no posts matching your filters.
  • 146
    87493346.png

    32086164.png
    Fluid UI | Lagless gaming | Battery friendly | Multitasking
    32086164.png

    Project Fluid is latest project im working on.
    It consists from build.prop tweaks and init.d tweaks.
    This is also a discussion thread you can always suggest me something.

    If this project helped you in any way feel free to rate this thread 5* and thank me its free. Also comment how is your phone feeling with Project Fluid

    32086164.png

    NAVIGATION | Build.prop | Script | Other

    32086164.png
    CREDITS:
    • zeppelinrox
    • pikachu01
    • iONEx
    • LENAROX
    • smokin1337
    • imbawind
    • slaid480
    • smokin1337
    • [email protected]
    • darky
    • lpy
    • totiadrenalin
    • lambgx02
    • doomlord
    • Hero
    • if you think you should be here send me PM
    79
    32086164.png

    Navigation | BUILD.PROP | Script | Other

    32086164.png

    REQUIREMENTS:
    • rooted phone
    • android 2.3+

    INSTALLATION:
    • A)
      1. Open "Root Explorer" and click the R/W
      2. Go to /system/build.prop
      3. Backup yout current build.prop
      4. Long-press on Build.Prop and you’ll see a pop up
      5. Text Editor
      6. Type in those few line of words below into the last line of the text then save
      7. reboot and enjoy
    • B)
      1. Open "Root Explorer" and click R/W
      2. Go to /system and copy build.prop to your sd card
      3. Copy build.prop to your pc
      4. Move build.prop again to /system and change permission

    TWEAKS:​

    Qualcomm specific tweaks. Might cause reboot on other.
    Code:
    com.qc.hardware=1
    debug.qc.hardware=true
    debug.qctwa.preservebuf=1
    debug.qctwa.statusbar=1
    Unlock fps limit
    Code:
    debug.egl.swapinterval=0
    Render UI with GPU and GPU tweaks
    Code:
    debug.composition.type=gpu
    debug.egl.hw=1
    debug.sf.hw=1
    ro.sf.compbypass.enable=0
    #enable harware egl profile
    debug.egl.profiler=1
    #Enable tile rendering
    debug.enabletr=true
    persist.sys.composition.type=gpu
    #16BIT transparency , Smother Scrolling
    persist.sys.use_16bpp_alpha=1
    #3d performance
    persist.android.strictmode=0
    ro.min_pointer_dur=1
    ro.secure=0
    Fluid UI
    Code:
    persist.service.lgospd.enable=0
    persist.service.pcsync.enable=0
    Device supports EHRPD
    Code:
    ro.config.ehrpd=true
    System prop for tethering denied
    Code:
    ro.tether.denied=false
    Possible screen glitch fix
    Code:
    debug.gr.numframebuffers=3
    Disable boot animation for faster boot
    Code:
    debug.sf.nobootanimation=1
    Disable debugging notify icon on statusbar
    Code:
    persist.adb.notify=0
    Enable Hardware 3D
    Code:
    hw3d.force=1
    Phone will not wake up from hitting the volume rocker
    Code:
    ro.config.hwfeature_wakeupkey=0
    Unlock phone by menu key
    Code:
    ro.config.hw_menu_unlockscreen=false
    Save power while phone is in sleep mode
    Code:
    ro.ril.disable.power.collapse=1
    Ringtone rings without delay
    Code:
    ro.telephony.call_ring.delay=0
    The wifi scan interval in seconds so you can use a lower or higher value.
    Code:
    wifi.supplicant_scan_interval=180
    Better scrolling responsiveness
    Code:
    windowsmgr.max_events_per_sec=90
    ro.max.fling_velocity=12000
    ro.min.fling_velocity=8000
    Better touchscreen responsiveness
    Code:
    touch.pressure.scale=0.001
    Support for ipv4 and ipv6.
    Code:
    persist.telephony.support.ipv4=1
    persist.telephony.support.ipv6=1
    Faster boot
    Code:
    persist.sys.shutdown.mode=hibernate
    ro.config.hw_quickpoweron=true
    Better battery life
    Code:
    ro.config.hw_fast_dormancy=1
    ro.config.hw_power_saving=true
    Enable 16 BIT
    Code:
    debug.fb.rgb565=1
    VM tweak
    Code:
    ro.vold.umsdirtyratio=20
    Disable Zygote loader
    Code:
    ro.wmt.blcr.enable=0
    Better in call voice quality
    Code:
    ro.ril.enable.amr.wideband=1
    Signal Tweaks
    Code:
    persist.cust.tel.eons=1
    ro.ril.gprsclass=10
    ro.ril.hsdpa.category=8
    ro.ril.hsupa.category=6
    ro.ril.hsxpa=1
    Wireless Speed Tweaks
    Code:
    net.ipv4.ip_no_pmtu_disc=0
    net.ipv4.route.flush=1
    net.ipv4.tcp_ecn=0
    net.ipv4.tcp_fack=1
    net.ipv4.tcp_mem=187000 187000 187000
    net.ipv4.tcp_moderate_rcvbuf=1
    net.ipv4.tcp_no_metrics_save=1
    net.ipv4.tcp_rfc1337=1
    net.ipv4.tcp_rmem=4096 39000 187000
    net.ipv4.tcp_sack=1
    net.ipv4.tcp_timestamps=1
    net.ipv4.tcp_window_scaling=1
    net.ipv4.tcp_wmem=4096 39000 187000
    net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
    net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
    net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
    net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
    net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
    Website Bypass
    Code:
    net.dns1=8.8.8.8
    net.dns2=8.8.4.4
    net.rmnet0.dns1=8.8.8.8
    net.rmnet0.dns2=8.8.4.4
    Graphics Enhancement
    Code:
    #Raise photo and video recording quality
    ro.media.enc.hprof.vid.bps=8000000
    ro.media.enc.hprof.vid.fps=75
    #Raise JPG quality to 100%
    ro.media.enc.jpeg.quality=100
    ro.media.dec.aud.wma.enabled=1
    ro.media.dec.vid.wmv.enabled=1
    ro.media.cam.preview.fps=0
    ro.media.codec_priority_for_thumb=so
    DalvikVM
    Code:
    dalvik.gc.type=precise 
    dalvik.vm.dexopt-data-only=1
    #Enables register map for tracking objects to garbage collect. Might give a little more RAM at the cost of a few CPU cycles.
    dalvik.vm.dexopt-flags=m=v,o=y
    dalvik.vm.jniopts=forcecopy
    dalvik.vm.lockprof.threshold=500
    dalvik.vm.stack-trace-file=/data/anr/traces.txt
    dalvik.vm.verify-bytecode=false
    Unknown functions
    Code:
    debug.kill_allocating_task=0
    debug.overlayui.enable=0
    dev.pm.dyn_samplingrate=1
    ENFORCE_PROCESS_LIMIT=false
    persist.sampling_profiler=0
    ro.debuggable=1
    ro.config.disable.hw_accel=false
    ro.fb.mode=1
    Not working
    Code:
    #debug.performance.tuning=1
    #video.accelerate.hw=1
    #persist.sys.ui.hw=1
    #dalvik.vm.checkjni=false
    #dalvik.vm.execution-mode=int:jit
    #dalvik.vm.heapgrowthlimit=48m
    #dalvik.vm.heapsize=64m
    #Raise photo and video recording quality
    #ro.media.dec.jpeg.memcap=20000000
    #Enable surface dithering
    #persist.sys.use_dithering=0
    #Allow purging of assets
    #persist.sys.purgeable_assets=0
    #Force launcher into memory
    #ro.HOME_APP_ADJ=1
    # Disables data sent and logging.Only for HTC
    #profiler.force_disable_err_rpt=1
    #profiler.force_disable_ulog=1
    #ro.config.nocheckin=1
    #sleep mode for battery savings. 0 power collapse suspend, 1 power collapse (best), 2 apps go to sleep, 3 show clock and wait, 4 wait for interrupt
    #pm.sleep_mode=1
    #Fix some application issues/Disable kernel error logging
    #ro.kernel.android.checkjni=0
    #ro.kernel.checkjni=0
    75
    32086164.png

    Navigation | Build.prop | SCRIPT | Other

    32086164.png

    REQUIREMENTS:
    • rooted phone
    • android 2.3+
    • kernel/rom with init.d support
    • 5mb free in system
    • busybox

    FEATURES:
    • VM tweaks | better battery life and performance
    • SD card tweaks | faster sd card read and write and mount speed
    • Full GPU rendering | Removes the android cpu rendering so the system can only use the gpu for rendering
    • Darky zipaling | Will zipalign all apk files to increase performance and reduce memory consumption
    • Battery tweaks | Tweaks that improve power consumpion
    • Kernel tweaks | better battery life and performance
    • Internet speed tweaks | Improves general browsing speed
    • disable logger | Disables the Android logger
    • Hacked host | ad-free browsing and applications
    • Reduced /dbdata, /data, /sdcard usage of *.db files and faster database access
    • IO scheduler tweaks
    • Cache cleared at every boot
    • It backups your old init.d scripts
    • Various tweaks
    • Manny other (scroll down)

    INSTALLATION:
    • copy it on your sd card
    • go to recovery mod
    • flash it
    • reboot
    • enjoy

    DOWNLOADS:
    CHANGELOG:
    Code:
    [LIST][*][SIZE="5"]v1:[/SIZE][SIZE="4"][LIST]
    [*]initial release
    [/LIST][/SIZE]
    [*][SIZE="5"]v1.1[/SIZE]
    [SIZE="4"][LIST]
    [*]flashable .zip
    [*]entropy seeder generator fixed
    [*]removed touchscreen tweak (only samsung phone)
    [*]now script will backup you old init.d script in /sdcard/Fluid_engine
    [/LIST][/SIZE]
    [*][SIZE="5"]v1.2[/SIZE]
    [SIZE="4"][LIST]
    [*]fixes
    [/LIST][/SIZE]
    [*][SIZE="5"]v1.3[/SIZE]
    [SIZE="4"][LIST]
    [*]fixes
    [/LIST][/SIZE]
    [*][SIZE="5"]v2[/SIZE]
    [SIZE="4"][LIST]
    [*]updated mpengine
    [*]live entropy seeder
    [*]removed some double lines 
    [*]changed some values
    [/LIST][/SIZE]
    [*][SIZE="5"]v3[/SIZE]
    [SIZE="4"][LIST]
    [*]fixes
    [*]removed default scheduler
    [*]hacked host for no ads
    [*]various changes
    [*]removed rpengine only cause it gets many updates and this way it will be easier for people to update it
    [*]fully compatible with RPEngine, supercharger, seeder, crossbreder
    [/LIST][/SIZE]
    [*][SIZE="5"]v3.1[/SIZE]
    [SIZE="4"][LIST]
    [*]bug fixes [some values didnt apply]
    [*]new values
    [/LIST][/SIZE]
    [*][SIZE="5"]v3.2[/SIZE]
    [SIZE="4"][LIST]
    [*]bug fixes
    [*]new values
    [*]removed renice apps
    [*]now you are going to have more free ram
    [*]since of more free ram your battery life will be better
    [/LIST][/SIZE]
    [/LIST]
    55
    32086164.png


    32086164.png

    OPTIONAL:
    • Governor tweaks from thunderbolt script
      remove .txt extension
      move this to system/etc/init.d
      set permission
    • Disable journalism
      remove .txt extension
      move this to system/etc/init.d
      set permission
    • tweak for general apps to open instantly (ram usage might be higher)
      remove .txt extension
      move this to system/etc/init.d
      set permission
      removes lag from keyboard, phone, superuser and other most used apps
    • sqlite for gb/ics
      remove .txt extension
      move this to system/xbin
      set permission
    • sqlite for jb
      you move this to system/xbin
    • vsync activator
      flash this zip
      VSync synchronizes things. It tells the GPU to wait for the screen to finish its line by line drawing before loading the next frame.
      The VSync pulse is now used to start all the processing for the next frame.
    • Fluid Libs
      flash this zip
      xperia 2011 devices only
      collection of newest xperia libs
      xperia T jelly bean libs, xperia S modified adreno libs, new egl libs, xperia V/T sound libs

    INSTALLATION:
    1. Copy it on your sd card
    2. move to right place
    3. set permission
    4. reboot

    EXPLANATIONS:
    • vm/block_dump
      This enables block I/O debugging when set to a nonzero value. If you want to find out which process caused the disk to spin up (see /proc/sys/vm/laptop_mode), you can gather information by setting the flag.
      When this flag is set, Linux reports all disk read and write operations that take place, and all block dirtyings done to files. This makes it possible to debug why a disk needs to spin up, and to increase battery life even more. The output of block_dump is written to the kernel output, and it can be retrieved using "dmesg". When you use block_dump and your kernel logging level also includes kernel debugging messages, you probably want to turn off klogd, otherwise the output of block_dump will be logged, causing disk activity that is not normally there.
    • vm/dirty_background_bytes
      Contains the amount of dirty memory at which the pdflush background writeback daemon will start writeback.
      If dirty_background_bytes is written, dirty_background_ratio becomes a function of its value (dirty_background_bytes / the amount of dirtyable system memory).
    • vm/dirty_background_ratio
      Contains, as a percentage of total system memory, the number of pages at which the pdflush background writeback daemon will start writing out dirty data.
    • vm/dirty_bytes
      Contains the amount of dirty memory at which a process generating disk writes will itself start writeback.
      If dirty_bytes is written, dirty_ratio becomes a function of its value (dirty_bytes / the amount of dirtyable system memory).
      Note: the minimum value allowed for dirty_bytes is two pages (in bytes); any value lower than this limit will be ignored and the old configuration will be retained.
    • vm/dirty_expire_centisecs and vm/dirty_writeback_centisecs
      expire:
      How old "dirty" data should be before the kernel considers it old enough to be written to disk. It is expressed in 100ths of a second.
      writeback:
      This is the interval of when the writeback daemons periodically wake up and write "old" data out to disk. It is expressed in 100ths of a second.
    • vm/dirty_ratio
      Contains, as a percentage of total system memory, the number of pages at which a process which is generating disk writes will itself start writing out dirty data.
    • vm/drop_caches
      Writing to this will cause the kernel to drop clean caches, dentries and inodes from memory, causing that memory to become free.

      To free pagecache:

      echo 1 > /proc/sys/vm/drop_caches

      To free dentries and inodes:

      echo 2 > /proc/sys/vm/drop_caches

      To free pagecache, dentries and inodes:

      echo 3 > /proc/sys/vm/drop_caches

      As this is a non-destructive operation, and dirty objects are not freeable, the user should run "sync" first in order to make sure all cached objects are freed.
    • vm/laptop_mode
      laptop_mode is a knob that controls "laptop mode". When the knob is set, any physical disk I/O (that might have caused the hard disk to spin up, see /proc/sys/vm/block_dump) causes Linux to flush all dirty blocks. The result of this is that after a disk has spun down, it will not be spun up anymore to write dirty blocks, because those blocks had already been written immediately after the most recent read operation. The value of the laptop_mode knob determines the time between the occurrence of disk I/O and when the flush is triggered. A sensible value for the knob is 5 seconds. Setting the knob to 0 disables laptop mode.
    • vm/lowmem_reserve_ratio
      Ratio of total pages to free pages for each memory zone.
    • vm/max_map_count
      This file contains the maximum number of memory map areas a process may have. Memory map areas are used as a side-effect of calling malloc, directly by mmap and mprotect, and also when loading shared libraries.
      While most applications need less than a thousand maps, certain programs, particularly malloc debuggers, may consume lots of them, e.g., up to one or two maps per allocation.
      The default value is 65536.
    • vm_min_free kbytes
      This is used to force the Linux VM to keep a minimum number of kilobytes free. The VM uses this number to compute a pages_min value for each lowmem zone in the system. Each lowmem zone gets a number of reserved free pages based proportionally on its size.
    • vm/mmap_min_addr
      This file indicates the amount of address space which a user process will be restricted from mmaping. Since kernel null dereference bugs could accidentally operate based on the information in the first couple of pages of memory userspace processes should not be allowed to write to them.
      By default this value is set to 0 and no protections will be enforced by the security module. Setting this value to something like 64k will allow the vast majority of applications to work correctly and provide defense in depth against future potential kernel bugs.
    • vm/nr_pdflush_threads
      The count of currently-running pdflush threads. This is a read-only value.
    • vm/oom_dump_tasks
      Enables a system-wide task dump (excluding kernel threads) to be produced when the kernel performs an OOM-killing and includes such information as pid, uid, tgid, vm size, rss, cpu, oom_adj score, and name. This is helpful to determine why the OOM killer was invoked and to identify the rogue task that caused it.
      If this is set to zero, this information is suppressed. On very large systems with thousands of tasks it may not be feasible to dump the memory state information for each one. Such systems should not be forced to incur a performance penalty in OOM conditions when the information may not be desired.
      If this is set to non-zero, this information is shown whenever the OOM killer actually kills a memory-hogging task.
      The default value is 0.
    • vm/oom_kill_allocating_task
      This enables or disables killing the OOM-triggering task in out-of-memory situations.
      If this is set to zero, the OOM killer will scan through the entire tasklist and select a task based on heuristics to kill. This normally selects a rogue memory-hogging task that frees up a large amount of memory when killed.
      If this is set to non-zero, the OOM killer simply kills the task that triggered the out-of-memory condition. This avoids the expensive tasklist scan.
      If panic_on_oom is selected, it takes precedence over whatever value is used in oom_kill_allocating_task.
      The default value is 0.
    • vm overcommit memory
      This controls overcommit of system memory, possibly allowing processes to allocate (but not use) more memory than is actually available.
      0 - Heuristic overcommit handling. Obvious overcommits of address space are refused. Used for a typical system. It ensures a seriously wild allocation fails while allowing overcommit to reduce swap usage. root is allowed to allocate slighly more memory in this mode. This is the default.
      1 - Always overcommit. Appropriate for some scientific applications.
      2 - Don't overcommit. The total address space commit for the system is not permitted to exceed swap plus a configurable percentage (default is 50) of physical RAM. Depending on the percentage you use, in most situations this means a process will not be killed while attempting to use already-allocated memory but will receive errors on memory allocation as appropriate.
    • vm overcommit ratio
      Percentage of physical memory size to include in overcommit calculations.
      Memory allocation limit = swapspace + physmem * (overcommit_ratio / 100)
      swapspace = total size of all swap areas
      physmem = size of physical memory in system
    • vm/page-cluster
      This controls the number of pages which are written to swap in a single attempt. The swap I/O size.
      It is a logarithmic value - setting it to zero means "1 page", setting it to 1 means "2 pages", setting it to 2 means "4 pages", etc.
      The default value is three (eight pages at a time). There may be some small benefits in tuning this to a different value if your workload is swap-intensive.
    • vm/panic_on_oom
      This enables or disables panic on out-of-memory feature. If this is set to 1, the kernel panics when out-of-memory happens. If this is set to 0, the kernel will kill some rogue process, by calling oom_kill().
      Usually, oom_killer can kill rogue processes and system will survive. If you want to panic the system rather than killing rogue processes, set this to 1.
      The default value is 0.
      Panic is a system error that is detected by the kernel.
    • vm/percpu_pagelist_fraction
      This is the fraction of pages at most (high mark pcp->high) in each zone that are allocated for each per cpu page list. The min value for this is 8. It means that we don't allow more than 1/8th of pages in each zone to be allocated in any single per_cpu_pagelist. This entry only changes the value of hot per cpu pagelists. User can specify a number like 100 to allocate 1/100th of each zone to each per cpu page list.
      The batch value of each per cpu pagelist is also updated as a result. It is set to pcp->high / 4. The upper limit of batch is (PAGE_SHIFT * 8).
      The initial value is zero. Kernel does not use this value at boot time to set the high water marks for each per cpu page list.
    • vm/scan_unevictable_pages
      When written to, this tunable will initiate a scan of individual or all zones' unevictable lists and move any pages that have become evictable onto the respective zone's inactive list, where shrink_inactive_list() will deal with them. If evictable pages are found in unevictable lru, kernel will print filenames and file offsets of those pages.
    • vm/swappiness
      swappiness is a parameter which sets the kernel's balance between reclaiming pages from the page cache and swapping process memory. The default value is 60.
      If you want kernel to swap out more process memory and thus cache more file contents increase the value. Otherwise, if you would like kernel to swap less decrease it.
      more information
    • vm vfs cache presure
      Now here is where it gets interesting! File system cache (dentry/inode) is really more important than the block cache above in dirty ratio and dirty background ratio, so we really want the kernel to use up much more of the RAM for file system cache, this will increas the performance of the system without sacrificing performance at the application level. The default value is 100, as a percentage, and what you want to do is lower the value to tell the kernel to favor the file system cache and not drop them aggressively.

    LINKS TO IMPORTANT THREADS:
    BANNERS:
    45136940.png

    whiteholom.png

    blackoi.png
    9
    I will release v3.1 very soon
    That will be bugfixes

    And v4 will be completely redesigned