Hi everyone,
I haven't been on in a while and my username is new, but been using the site for years in the early root days.
I just purchased and installed a Seicane head unit in my Volvo XC60. Things are working great, but I had to bypass the amp to get sound which I thought was weird. Once installed, I noticed none of my buttons would work. Doing some research, I see that this could be due to the CANBUS not being set up correctly. The unit is a P series with a Octa-Core Cortex-A53. I went into the the factory settings where you can pick your CANBUS but I cannot find one that specifically states Volvo. The harness that was provided by Seicane bridges between the stereo and the main unit and information screen. The main until connector provides power and ground. The information system provides some CANBUS lines to the unit. I would think that since these CANBUS lines feed into the unit I would not need a separate box to decode them, but I could be wrong.
1. Is anyone familiar with CANBUS that might give me some insight into which CANBUS manufacture option I should pick.
I haven't been on in a while and my username is new, but been using the site for years in the early root days.
I just purchased and installed a Seicane head unit in my Volvo XC60. Things are working great, but I had to bypass the amp to get sound which I thought was weird. Once installed, I noticed none of my buttons would work. Doing some research, I see that this could be due to the CANBUS not being set up correctly. The unit is a P series with a Octa-Core Cortex-A53. I went into the the factory settings where you can pick your CANBUS but I cannot find one that specifically states Volvo. The harness that was provided by Seicane bridges between the stereo and the main unit and information screen. The main until connector provides power and ground. The information system provides some CANBUS lines to the unit. I would think that since these CANBUS lines feed into the unit I would not need a separate box to decode them, but I could be wrong.
1. Is anyone familiar with CANBUS that might give me some insight into which CANBUS manufacture option I should pick.
