[SGH-M919] CF-Auto-Root

[Karelliann]

Has anyone tried this on a SGH-M1919V?
Android V 5.0.1
Baseband M919VVLUGOH1
Kernel V. 3.4.0-4508315
Build LRX22C.M919VVLUGOH1

 

[Icpebbles]

Hey guys, I ran this on my girlfriends phone and when i ran superuser it said it was disabling KNOX but it got stuck on the disabling screen. Any ideas?

 

[supazonique]

Hey guys, I ran this on my girlfriends phone and when i ran superuser it said it was disabling KNOX but it got stuck on the disabling screen. Any ideas?

Home button then kill all apps then open SU again and it'll do the process again but it should go through fine the 2nd time

Sent from my SM-N920T using XDA-Developers mobile app

 

[thedillybar]

Works on OK3

Works on OK3

 

[hereforanswers]

Has anyone tried this on a SGH-M919V?
Android V 5.0.1
Baseband M919VVLUGOH1
Kernel V. 3.4.0-4508315
Build LRX22C.M919VVLUGOH1
I cant find if the m919 tar.md5 file will work for this device, Dont wanna brick the device by trying Cf auto root without knowing. :/

 

[technosapien]

Anyone know if this works on QA1?

 

[jerryspring]

Root

Follow these instructions to the letter. Do not touch any buttons or checkboxes that are not listed below to touch!

- Download and unzip the CF-Auto-Root-....zip file (see posts below this one)
- If you end up with a recovery.img and cache.img file, you've extracted twice. You need to end up with a .tar.md5 file - don't extract that one
- (USB) Disconnect your phone from your computer
- Start Odin3-vX.X.exe
- Click the PDA button, and select CF-Auto-Root-....tar.md5
- Put your phone in download mode (turn off phone, then hold VolDown+Home+Power to boot - if it asks you to press a button to continue, press the listed button, or run adb reboot download command)
- (USB) Connect the phone to your computer
- Make sure Repartition is NOT checked
- Click the Start button
- Wait for Android to boot
- Done (if it took you more than 30 seconds, you need practise!)

NOTE: Sometimes the device does *not* boot into recovery mode and root your device. Just do the entire procedure again if this happens. If it still will not install root and such, make sure that in Odin "Auto Reboot" is not checked. Then after flashing, pull the battery, and boot with VolUp+Home+Power button to boot into recovery manually. This will start the install process.

New to Samsung? Unfamiliar with Odin? Think all the above is a hassle? Get used to it. It's very simple, and us Samsung folk use Odin (or Mobile ODIN ) for everything! It's so very very convenient once you get used to it. Notice the 30 second comment above? For experienced users, the entire process indeed takes only 30 seconds!

You may now optionally want to install and run Triangle Away to reset the flash counter.

Why use autoroot? Isn't the bootloader already unlocked?

 

[jerryspring]

Hey

Follow these instructions to the letter. Do not touch any buttons or checkboxes that are not listed below to touch!

- Download and unzip the CF-Auto-Root-....zip file (see posts below this one)
- If you end up with a recovery.img and cache.img file, you've extracted twice. You need to end up with a .tar.md5 file - don't extract that one
- (USB) Disconnect your phone from your computer
- Start Odin3-vX.X.exe
- Click the PDA button, and select CF-Auto-Root-....tar.md5
- Put your phone in download mode (turn off phone, then hold VolDown+Home+Power to boot - if it asks you to press a button to continue, press the listed button, or run adb reboot download command)
- (USB) Connect the phone to your computer
- Make sure Repartition is NOT checked
- Click the Start button
- Wait for Android to boot
- Done (if it took you more than 30 seconds, you need practise!)

NOTE: Sometimes the device does *not* boot into recovery mode and root your device. Just do the entire procedure again if this happens. If it still will not install root and such, make sure that in Odin "Auto Reboot" is not checked. Then after flashing, pull the battery, and boot with VolUp+Home+Power button to boot into recovery manually. This will start the install process.

New to Samsung? Unfamiliar with Odin? Think all the above is a hassle? Get used to it. It's very simple, and us Samsung folk use Odin (or Mobile ODIN ) for everything! It's so very very convenient once you get used to it. Notice the 30 second comment above? For experienced users, the entire process indeed takes only 30 seconds!

You may now optionally want to install and run Triangle Away to reset the flash counter.

Check your device model ! Settings -> About device -> Model number. See the third post for exact supported model numbers. If your device is a totally different model, it will not work (may even brick) !


CF-Root is the root for "rooting beginners" and those who want to keep as close to stock as possible. CF-Root is meant to be used in combination with stock Samsung firmwares, and be the quickest and easiest way for your first root.

Donate
CF-Root has been available for many devices (Galaxy S1, Galaxy Tab 7", Galaxy S2, Galaxy Note, Galaxy Nexus, Galaxy S3, and many more) and has clocked over 13 million downloads. This is not even counting custom ROMs that already include it. Don't be a leech, buy me a beer (and use the "Thanks" button!). Imagine if every CF-Root user has donated me $1...

What's installed
- SuperSU binary and APK
- Stock recovery

Installation and usage
Flash the CF-Auto-Root package as PDA in ODIN (details on how to do that are in next post), and your device should reboot into a modified recovery (signified by a large red Android logo) and it will install SuperSU for you and restore the stock recovery, and reboot back into Android.

If you don't get to the red Android logo, boot into recovery manually ("adb reboot recovery", or boot while holding Power+VolUp+Home).

Using this root increases your flash counter. You should run Triangle Away (see below) after rooting to reset the counter. Note that if you want to run custom kernels or custom recoveries, your flash counter will be set to 1 at every boot. Either configure Triangle Away to reset the counter at every boot (Play version only) or only reset the counter when you need to go into warranty.

Did you see the red Android logo during rooting, but SuperSU does not appear? This may sometimes occur due to left-over files and settings, however, you can usually install SuperSU from Google Play at this stage and it'll just work.

Why isn't this just called CF-Root
The traditional CF-Root's included a custom recovery (CWM, TWRP, etc) and were meant for devices that had a single kernel/recovery combination. CF-Auto-Root doesn't include a custom recovery and is meant for devices that have kernel and recovery separate (so you can manually install any custom recovery you wish). The Auto part comes from the fact that a large part of the process is automated (though it constantly needs adjusting)

Not included - Triangle Away
Triangle Away can be used to reset the flash counter after installing CF-Root. The flash counter keeps track of how many custom firmwares you have flashed, as this voids warranty. (No idea what this about ? Read up on it, you will want to use this !)

Not included - adbd Insecure
As this CF-Root does not include a custom kernel, adb shell does not have root access by default (you can still get it by typing su inside the shell), nor is adb remount supported, nor will adb push and adb pull work on system files. adbd Insecure can be used to remedy this situation. (No idea what this is about ? Don't worry about it !)

CF-Auto-Root homepage
http://autoroot.chainfire.eu/

CF-Auto-Root main thread
[CENTRAL] CF-Auto-Root
For requests for new roots and generic discussion - please keep device specific discussion in the thread you are viewing now.

Can't we just flash TWRP since bootloader is already unlocked?

---------- Post added at 01:04 PM ---------- Previous post was at 01:00 PM ----------

Sorry for double post. My net froze

 

[LittleGreenMartian]

Check your device model ! Settings -> About device -> Model number. See the third post for exact supported model numbers. If your device is a totally different model, it will not work (may even brick) !


CF-Root is the root for "rooting beginners" and those who want to keep as close to stock as possible. CF-Root is meant to be used in combination with stock Samsung firmwares, and be the quickest and easiest way for your first root.

Donate
CF-Root has been available for many devices (Galaxy S1, Galaxy Tab 7", Galaxy S2, Galaxy Note, Galaxy Nexus, Galaxy S3, and many more) and has clocked over 13 million downloads. This is not even counting custom ROMs that already include it. Don't be a leech, buy me a beer (and use the "Thanks" button!). Imagine if every CF-Root user has donated me $1...

What's installed
- SuperSU binary and APK
- Stock recovery

Installation and usage
Flash the CF-Auto-Root package as PDA in ODIN (details on how to do that are in next post), and your device should reboot into a modified recovery (signified by a large red Android logo) and it will install SuperSU for you and restore the stock recovery, and reboot back into Android.

If you don't get to the red Android logo, boot into recovery manually ("adb reboot recovery", or boot while holding Power+VolUp+Home).

Using this root increases your flash counter. You should run Triangle Away (see below) after rooting to reset the counter. Note that if you want to run custom kernels or custom recoveries, your flash counter will be set to 1 at every boot. Either configure Triangle Away to reset the counter at every boot (Play version only) or only reset the counter when you need to go into warranty.

Did you see the red Android logo during rooting, but SuperSU does not appear? This may sometimes occur due to left-over files and settings, however, you can usually install SuperSU from Google Play at this stage and it'll just work.

Why isn't this just called CF-Root
The traditional CF-Root's included a custom recovery (CWM, TWRP, etc) and were meant for devices that had a single kernel/recovery combination. CF-Auto-Root doesn't include a custom recovery and is meant for devices that have kernel and recovery separate (so you can manually install any custom recovery you wish). The Auto part comes from the fact that a large part of the process is automated (though it constantly needs adjusting)

Not included - Triangle Away
Triangle Away can be used to reset the flash counter after installing CF-Root. The flash counter keeps track of how many custom firmwares you have flashed, as this voids warranty. (No idea what this about ? Read up on it, you will want to use this !)

Not included - adbd Insecure
As this CF-Root does not include a custom kernel, adb shell does not have root access by default (you can still get it by typing su inside the shell), nor is adb remount supported, nor will adb push and adb pull work on system files. adbd Insecure can be used to remedy this situation. (No idea what this is about ? Don't worry about it !)

CF-Auto-Root homepage
http://autoroot.chainfire.eu/

CF-Auto-Root main thread
[CENTRAL] CF-Auto-Root
For requests for new roots and generic discussion - please keep device specific discussion in the thread you are viewing now.

Your software package breaks Samsung's Knox functionality on my Samsung S4 SGH-M919.. I'm not sure I like that.

 

[seekingbuddha]

Anyone know if this works on QA1?

I have a UVSFQA1 baseband too, and want to try this. What was your experience trying CF-auto-root ? Magisk is not an option for me because it requires Android 5 or higher (as of now).

 

[Teracotta]

I downloaded this but notice it was updated in May 2017 to use the non-Chainfire superSU

This is no longer trustworthy, and no different from using KingoRoot (which steals your IMEI). Find another method to ROOT.

 

[uttamd774@gmail.com]

Root mobile

 

[anonymouseuser]

So is this unsafe now? Any other way to root my SGH-M919?