General 👍 [SHARED][ROM] [ANDROID 13] [OSS] PULKITS lineage os 20 19.02.23/ checked by myself

[aleMarvel]

i have next release (from telegram) and i dont like... dev removed check for separate volume from notifications an incoming call... pay attention when will release if update or not...

 

[thxjxs]

i have next release (from telegram) and i dont like... dev removed check for separate volume from notifications an incoming call... pay attention when will release if update or not...

thanks for the update. are you still on the latest update of the rom? were there any other bugs you faced, i saw a few mentioned on the telegram channel (like a buggy face unlock animation, some launcher bugs, etc). there was a case where native screen recording failed and crashed... do you face a similar problem on the latest release?

 

[thxjxs]

Sorry I've mixed up the threads in my brain....here it is
Post in thread '[SHARED] [OSS] [MIUI] [KERNEL] newest sweet/in quantum, vantom, sleepy, yuki, delta, doraemon, kewl and aghisna kernel' https://forum.xda-developers.com/t/...kewl-and-aghisna-kernel.4398423/post-88268153

i hear the dev for the sleepy kernel is back with its development for our device. however in the meantime, ive thought to test out the modified version... how was the battery backup? are there any jitters which you experienced in daily use particularly in any of the UI components like the qs drop down?

 

[Atrumitos]

I've been using the modified sleepy Kernel for the past 3 days, as I was very disappointed with the latest Aghisna.

Haven't noticed any bugs, notifications work properly and battery is just as good, if not better.

 

[fobtob387]

Latest update seems to not work properly with Aghisna, 90hz option doesn't show up but it worked fine in previous LOS build.

 

[Laptapper]

Latest update seems to not work properly with Aghisna, 90hz option doesn't show up but it worked fine in previous LOS build.

Did you've tried newest kewl?
I've installed some hours ago but los20 not updated to newest...

Post in thread '[SHARED] [OSS] [MIUI] [KERNEL] newest sweet/in quantum, vantom, sleepy, yuki, delta, doraemon, kewl and aghisna kernel' https://forum.xda-developers.com/t/...kewl-and-aghisna-kernel.4398423/post-88330271

 

[Fostel]

I'm running los20 with kewl kernel for fast charging ln8000 since some days and I can recommend it, it's very stable with smooth and fast responding. Battery consumption may better than in los19
Copy paste in recents for now only with pixelify 2.1 magisk module.

This vanilla LOS or Pulkit Gapps LOS?
Just got the ln8000 device and am not sure what to do with it.
Thanks.

 

[lubo777]

Today I upgraded to the latest available update of the Lineage OS 20 from 23 March and everything seems to be perfect!

I'm using the Magisk module of the Leica Camera for the best JPG quality results: LeicaCameraMod-4.7.230121.1-GLSPALR.zip

What kernel are you using for better battery life?
Going to experiment in a few days with the latest Sleepy kernel, but first I want to see the default kernel.

In general I'm happy the battery life of the default kernel from the Lineage OS version from February, but strangely despite the good battery I can't see long time in the DEEP SLEEP zone ...

 

[Laptapper]

This vanilla LOS or Pulkit Gapps LOS?
Just got the ln8000 device and am not sure what to do with it.
Thanks.

Pulkit gapps

 

[thxjxs]

Today I upgraded to the latest available update of the Lineage OS 20 from 23 March and everything seems to be perfect!

I'm using the Magisk module of the Leica Camera for the best JPG quality results: LeicaCameraMod-4.7.230121.1-GLSPALR.zip

What kernel are you using for better battery life?
Going to experiment in a few days with the latest Sleepy kernel, but first I want to see the default kernel.

In general I'm happy the battery life of the default kernel from the Lineage OS version from February, but strangely despite the good battery I can't see long time in the DEEP SLEEP zone ...

hey lubo777, thanks for the update, just a couple of quick questions...
1. doesn't pulkit's version of lineage OS already include a Leica cam? or were you using the vanilla build (there was also an untested vanilla build in the telegram group but as far as i can remember right now, Leica cam was present in that too which kinda makes the second qn moot ig)
2. dyu have the

bq

or

ln8000

charging driver?
3. when you mean the latest sleepy, do you mean the last update by StOrmCatz (https://forum.xda-developers.com/t/...wl-and-aghisna-kernel.4398423/post-88268153)?

I had flashed the latest update to LineageOS two days back and although i usually immediately shift to the ln8000 version of the Kewl kernel, i thought i'd give the default kernel a chance to prove itself. the initial impressions were good, it was at 0.2%/hr idle drain and all was good but as the battery percentage dropped, the idle drain increased (i don't understand how that works) and at the end of the day, i was at 1% with 4.5 hrs of SOT, and the idle drain at 4.1%/hr (there was no power hungry background processes running)

fastforward to yesterday, i flashed the unofficial sleepy linked above which was recommended by Laptapper and im glad i did

started the day off with a full battery and had a very light day with barely 3 hrs of screen use, but with cellular data switched on most of the time, and the battery is down only by 31% (the battery percentage was pure coincidence ) and with a really managable idle drain of 0.4%. although im not sure if, like the rom's default kernel, the idle drain will increase as the battery percentage drops, will update soon at the end of the battery cycle, so far so good

im not sure how my battery stats compare to others, but for me, if this rom+kernel combination continues to push this same level of battery consumption, im a peaceful man

Edit: deep sleep is at 89% of screen time at the moment

 

[lubo777]

hey lubo777, thanks for the update, just a couple of quick questions...
1. doesn't pulkit's version of lineage OS already include a Leica cam? or were you using the vanilla build (there was also an untested vanilla build in the telegram group but as far as i can remember right now, Leica cam was present in that too which kinda makes the second qn moot ig)
2. dyu have the

bq

or

ln8000

charging driver?
3. when you mean the latest sleepy, do you mean the last update by StOrmCatz (https://forum.xda-developers.com/t/...wl-and-aghisna-kernel.4398423/post-88268153)?

I had flashed the latest update to LineageOS two days back and although i usually immediately shift to the ln8000 version of the Kewl kernel, i thought i'd give the default kernel a chance to prove itself. the initial impressions were good, it was at 0.2%/hr idle drain and all was good but as the battery percentage dropped, the idle drain increased (i don't understand how that works) and at the end of the day, i was at 1% with 4.5 hrs of SOT, and the idle drain at 4.1%/hr (there was no power hungry background processes running)

fastforward to yesterday, i flashed the unofficial sleepy linked above which was recommended by Laptapper and im glad i did


started the day off with a full battery and had a very light day with barely 3 hrs of screen use, but with cellular data switched on most of the time, and the battery is down only by 31% (the battery percentage was pure coincidence ) and with a really managable idle drain of 0.4%. although im not sure if, like the rom's default kernel, the idle drain will increase as the battery percentage drops, will update soon at the end of the battery cycle, so far so good

im not sure how my battery stats compare to others, but for me, if this rom+kernel combination continues to push this same level of battery consumption, im a peaceful man

Edit: deep sleep is at 89% of screen time at the moment

I'm flashing this LeicaCameraMod-4.7.230121.1-GLSPALR.zip Magisk module because it have much better JPG quality (specially sharpness) than the Leica Cam version which was included in the February version.

I don't think that I have the ln8000 charger but I can't find in the Device Info HW+ neither of both drivers ... fast charging is working OK with the default Lineage OS kernel on my phone

This is the latest version available of the Sleepy kernel: https://www.pling.com/p/1959886/
It supports both charging modules.

P.S. I found it: bq2597x-charger

 

[aleMarvel]

Today I upgraded to the latest available update of the Lineage OS 20 from 23 March and everything seems to be perfect!

I'm using the Magisk module of the Leica Camera for the best JPG quality results: LeicaCameraMod-4.7.230121.1-GLSPALR.zip

What kernel are you using for better battery life?
Going to experiment in a few days with the latest Sleepy kernel, but first I want to see the default kernel.

In general I'm happy the battery life of the default kernel from the Lineage OS version from February, but strangely despite the good battery I can't see long time in the DEEP SLEEP zone ...

perfect no for all... the sliders for volume and notifications united in only one is terrible.. and your module for leica not open video from icon preview

 

[lubo777]

perfect no for all... the sliders for volume and notifications united in only one is terrible.. and your module for leica not open video from icon preview

Actually I'm more focused on getting really good quality pictures from my camera, than how a secondary shortcut is working ...

 

[lubo777]

Two days ago I flashed again the latest version of the Sleepy Kernel
With it definitely I have much better Battery life than with the default kernel!
With the default kernel I have got battery discharge more than 1-1.5% at night, but with SLEEPY_KERNEL-OSS-XXX-SWEET v.4.14.305 I have 80% in Deep sleep when screen is off .....
this means around 3% for 8 hours at night

P.S. I have downloaded the latest Vanilla version of the Lineage OS today and I'll give it a try this days especially this test if it's possible to use the LeicaCameraMod-4.7.230121.1-GLSPALR.zip
with it.
Yesterday I have checked the default Leica camera coming by default with Lineage and definitely LeicaCameraMod-4.7.230121.1-GLSPALR.zip
has much better control of the Sharpness and because of that the JPG files coming from the Photo or Pro mode are with much better detail and overall quality.

P.S.2 For best camera results I strongly recommend to shoot in RAW and export the JPG images using Lightroom Android app ...

 

[aleMarvel]

Two days ago I flashed again the latest version of the Sleepy Kernel
With it definitely I have much better Battery life than with the default kernel!
With the default kernel I have got battery discharge more than 1-1.5% at night, but with SLEEPY_KERNEL-OSS-XXX-SWEET v.4.14.305 I have 80% in Deep sleep when screen is off .....
this means around 3% for 8 hours at night

P.S. I have downloaded the latest Vanilla version of the Lineage OS today and I'll give it a try this days especially this test if it's possible to use the LeicaCameraMod-4.7.230121.1-GLSPALR.zip
with it.
Yesterday I have checked the default Leica camera coming by default with Lineage and definitely LeicaCameraMod-4.7.230121.1-GLSPALR.zip
has much better control of the Sharpness and because of that the JPG files coming from the Photo or Pro mode are with much better detail and overall quality.

P.S.2 For best camera results I strongly recommend to shoot in RAW and export the JPG images using Lightroom Android app ...

if you want, yesterday night was released (on channel telegram) LOS but with MICROG too and more users say has incredible battery life, better vanilla too ( some screen report 5%h SOT, 0,3%h dp) !

for me not use vanilla, i like gapps.. i returned on feb build with kernel stock...
difference with last release QPR2 is hight for bb.. feb i have SOT 8%h drain ... march > 10%h !!!
i tried sleepy and yes confirm, bb in deep sleep is always better, but not with screen is on

 

[Banana Joe]

Just flashed this one, telegram version, then updated OTA, magisked it, and moved to latest vantom (also from telegram). First impressions are EXTREMELY positive

Bravo Pulkit and thanks for the work!

Btw, I flashed it on top of pulkits LOS 19.1, seems to be behaving very fine in all regards (knock on wood, because I don't want to wipe and start over!).

 

[Laptapper]

I've changed ROM in case of some problems....
Read here:

👍 [ SHARED][ROM)[ANDROID 13] cherish OS 4.7.5 OFFICIAL/ checked by myself

Newest 4.7.5 Page 4 Newest 4.7 page 2 Hi guys I've left pulkits lineage in case of big problem with Bluetooth car connection (I've tried some different fw and clean flash.... But no success) and screenshot edit. With cherish out of the box...

forum.xda-developers.com

 

[aleMarvel]

I've changed ROM in case of some problems....
Read here:

👍 [ SHARED][ROM)[ANDROID 13] cherish OS 4.7.5 OFFICIAL/ checked by myself

Newest 4.7.5 Page 4 Newest 4.7 page 2 Hi guys I've left pulkits lineage in case of big problem with Bluetooth car connection (I've tried some different fw and clean flash.... But no success) and screenshot edit. With cherish out of the box...

forum.xda-developers.com

but your problems are only in last los right ? in previuous ? ( i removed last too, i'm in feb build )

 

[Laptapper]

but your problems are only in last los right ? in previuous ? ( i removed last too, i'm in feb build )

Can't say in case of the arrival of the new car 4 days ago....

 

[Selephonic]

Not sure if its been raised before but I couldn't find it in the thread. I'm not able to switch system navigation method from gesture to three button. Two button was also listed in the last version but is not an option now, although I couldn't switch on that version either. If I select 3 button nav, the check circle just goes back to gesture nav.

Sorry, I should say, I'm on 20-20230324 OTA version, tried with Kewl and Sleepy kernel, same result.