SM-P607T charges but will not connect to any PC - won't even try

bigillz

Senior Member
Jun 30, 2010
247
76
0
I have an SM-P607T with an active T-Mobile plan - though I bought it from a third party then added it to my account. Previously everything worked fine, as I tried CM and a few ROMs on it, but ultimately went back to stock TMo ROM, 4.4.2, and just rooted it. Hadn't used it in awhile, grabbed it and thought I'd update to official Lollipop build.
First off, I disabled SuperSU and tried to apply the 4.4.4 update, assuming after that it'd offer me 5.1.1. Applying the 4.4.4 update failed. I factory reset the device in recovery mode (stock recovery), which of course fully removed SuperSU. Still fails updating. I downloaded the Lollipop ODIN tar, and that's where I started running into showstopper issues.
When I plug in a USB cable from a PC, the tablet starts charging, and that's it. There is no sign in windows that a device has been connected, no ding that something has been attached, no driver search. I tried this on 3 Win10 PCs. On all of them I installed Samsung Drivers, and even installed Samsung Easy Switch (new KIES). It would never register that it was plugged into a PC. I tried plugging my Note 4 in, registers and works fine (I read a thread on here by someone saying Win10 wouldn't recognize Samsung devices - not the case for me, phones work fine, just the tablet that won't show up). There is NO driver issue because the system never acknowledges anything is connected at all. I tried 3 PCs and 4 USB cables. I tried Samsung Easy Switch/KIES device recovery - tried putting tablet in download mode and tried putting it in recovery mode; neither ever shows up on PC. I tried using ADB, does not show up in devices (I have USB Debugging checked, Unknown Sources checked, etc etc).
I downloaded the Lollipop ODIN tar.md5 and put it on the microSD card. I loaded stock recovery, chose to flash from external storage, selected the .tar.md5, it said it was flashing it, said it flashed successfully even. Rebooted and it hadn't flashed at all.

Does ANYONE have ANY idea how to get my tablet updated? I can handle not being able to connect to PC, but I want to at least get OTA updates working. Factory reset, apply 4.4.4 OTA, fails after reboot every time.

Help?!
 

shineliu

New member
Dec 31, 2015
1
0
0
I have the similar problem as you. Someone said it could be easily resolved by enable CP logging in the recovery menu. I saw the solution after I got my device working so I did not try that.
My procedure is
1. Enter this using calculator (+30012012732+
2. enter *#0808#
3. switch to "DM+MODEM+ADB " option, OK, and reboot
4. until now, I could see the USB device in my Windows Device Manager, but MTP function won't work
5. repeat step 1 and 2
6. switch to "MTP+ADB" option, OK, and reboot
7. Done. Device could be identified. (Windows 10 x64 Pro)

Hope it could be useful for you.
 

tjmethod

Senior Member
Feb 20, 2012
216
35
58
Foxboro
Hi i have a similar problem as you, my Note is the SM-P600 that I rooted and has TWRP v2.8.7.0 and last time I went into recovery, the thing came up with a stock red upper left hand side text say "recovery in not seandroind enforcing" then ended up with the "Firmware upgrade encountered an issue please select recovery mode in kies and try again" but the damn thing will not connect. 2 usb 3 ports and 2 usb 2 ports multiplecables- anker, samsung you name it-musical ports, tried right clicking the 4 usb port hubs and unchecking power saving in power mgnt- nothing- yet my the usb drivers see my note 4 just fine, in device mngr, the note tablet shows up in usb at the bottom as samsung device, I am just perplexed as to how to un**** this thing. If you have any suggestions and can let me know I'd appreciate it.


I have an SM-P607T with an active T-Mobile plan - though I bought it from a third party then added it to my account. Previously everything worked fine, as I tried CM and a few ROMs on it, but ultimately went back to stock TMo ROM, 4.4.2, and just rooted it. Hadn't used it in awhile, grabbed it and thought I'd update to official Lollipop build.
First off, I disabled SuperSU and tried to apply the 4.4.4 update, assuming after that it'd offer me 5.1.1. Applying the 4.4.4 update failed. I factory reset the device in recovery mode (stock recovery), which of course fully removed SuperSU. Still fails updating. I downloaded the Lollipop ODIN tar, and that's where I started running into showstopper issues.
When I plug in a USB cable from a PC, the tablet starts charging, and that's it. There is no sign in windows that a device has been connected, no ding that something has been attached, no driver search. I tried this on 3 Win10 PCs. On all of them I installed Samsung Drivers, and even installed Samsung Easy Switch (new KIES). It would never register that it was plugged into a PC. I tried plugging my Note 4 in, registers and works fine (I read a thread on here by someone saying Win10 wouldn't recognize Samsung devices - not the case for me, phones work fine, just the tablet that won't show up). There is NO driver issue because the system never acknowledges anything is connected at all. I tried 3 PCs and 4 USB cables. I tried Samsung Easy Switch/KIES device recovery - tried putting tablet in download mode and tried putting it in recovery mode; neither ever shows up on PC. I tried using ADB, does not show up in devices (I have USB Debugging checked, Unknown Sources checked, etc etc).
I downloaded the Lollipop ODIN tar.md5 and put it on the microSD card. I loaded stock recovery, chose to flash from external storage, selected the .tar.md5, it said it was flashing it, said it flashed successfully even. Rebooted and it hadn't flashed at all.

Does ANYONE have ANY idea how to get my tablet updated? I can handle not being able to connect to PC, but I want to at least get OTA updates working. Factory reset, apply 4.4.4 OTA, fails after reboot every time.

Help?!


---------- Post added at 11:04 AM ---------- Previous post was at 11:02 AM ----------

I am confused what you mean by calculator, I am on Win 10 and have a similar problem, my Note is the SM-P600 that I rooted and has TWRP v2.8.7.0 and last time I went into recovery, the thing came up with a stock red upper left hand side text say "recovery in not seandroind enforcing" then ended up with the "Firmware upgrade encountered an issue please select recovery mode in kies and try again" but the damn thing will not connect. 2 usb 3 ports and 2 usb 2 ports multiplecables- anker, samsung you name it-musical ports, tried right clicking the 4 usb port hubs and unchecking power saving in power mgnt- nothing- yet my the usb drivers see my note 4 just fine, in device mngr, the note tablet shows up in usb at the bottom as samsung device, I am just perplexed as to how to un**** this thing. If you have any suggestions and can let me know I'd appreciate it.




I have the similar problem as you. Someone said it could be easily resolved by enable CP logging in the recovery menu. I saw the solution after I got my device working so I did not try that.
My procedure is
1. Enter this using calculator (+30012012732+
2. enter *#0808#
3. switch to "DM+MODEM+ADB " option, OK, and reboot
4. until now, I could see the USB device in my Windows Device Manager, but MTP function won't work
5. repeat step 1 and 2
6. switch to "MTP+ADB" option, OK, and reboot
7. Done. Device could be identified. (Windows 10 x64 Pro)

Hope it could be useful for you.
 

agritux

Senior Member
Apr 11, 2012
2,534
783
0
Ankara
I have the similar problem as you. Someone said it could be easily resolved by enable CP logging in the recovery menu. I saw the solution after I got my device working so I did not try that.
My procedure is
1. Enter this using calculator (+30012012732+
2. enter *#0808#
3. switch to "DM+MODEM+ADB " option, OK, and reboot
4. until now, I could see the USB device in my Windows Device Manager, but MTP function won't work
5. repeat step 1 and 2
6. switch to "MTP+ADB" option, OK, and reboot
7. Done. Device could be identified. (Windows 10 x64 Pro)

Hope it could be useful for you.
thank you very much. it worked.