Pewdeadcake
Senior Member
How did you enable full size taskbar
I cant find any option to change that as well
[SM-T505,T500,T507] [Android 14] Samsung Galaxy Tab A7 LTE GSI flashing guide
- Thread starter Hausemaster
- Start date
I cant find any option to change that as well
I tried trebledroid GSI which had full size taskbar... (Which of course I'm not using at the moment)
Last edited:
Pewdeadcake
Senior Member
Sure, report back on what works and what doesn't, and, also, did all 4 speakers work on setting convolver to 100%?
Pewdeadcake
Senior Member
it didnt work tho, still 2 speakers only but if i change it to 50% I will get 3 speakers working, the bottom right one don't work
Btw how did you make the headphone jack to work, i cant find any option related to it in the phh setting
Follow the updated step 1.2 in important notes, i made a mistake, the option is in Misc features not Samsung features
Edit: For me all speakers work on setting convolver to 100%, strange...
Last edited:
ljgjm
Senior Member
It of course does as long as your device has a sim slot, i.e. SM-T505!
The post #1 has been updated to run Android 13 GSIs too, take a look at it and try it!
ljgjm
Senior Member
Id stick with android 12, i usually stick with older versions, and i didnt update my stock rom to oneui 4.0
shorty9210
Senior Member
@Hausemaster Oh do I feel dumb lol I didn't realize I needed to flash both multidisabler and the disable.zip facepalm but I now running a smooth ineageOS 20 secured so I now have work gapps again with back up and restore!!! I'll keep you updated But for the magsikhide I as well recommend hiding ad services and any thing else API related and I'll update on what I find works the best and doesn't, as we ell I did find this module for removing boot warnings but didn't seem to work for me it flash through magsick fine but as far as I see no changes if you like when I get a chance I can attach it if you wanna play around with it!!!
Nah, I cant play around with pram based mods(i.e. boot warnings and other things are stored under pram),as the hdd in my ancient laptop could fail and leave me stranded. Also, congrats on your success!
shorty9210
Senior Member
I feel it if I find out more about it I'll post it, and we'll thank my kind sir , now time to attempt to crakc the US z fold 4 balababah
ljgjm
Senior Member
What laptop is it? I have a 2006 laptop with a hhd that still didnt fail
Its the dell inspiron 6400, dell used to make really good laptops
If you need a laptop that has no screen/broken screen, get the lenovo ideapad 3/L3, the only problem is the crappy screen
Mine was bought way back in 1998(i wasn't even in this world at that time), and no parts have been changed ever since, so, yeah...
ljgjm
Senior Member
Rip... I think you should optimise and overclock it at that point... You could install the os through a usb flash drive
You aren't really serious about using a Win 98 era machine as a computer, are you?
I really am doing that right now, it has an Intel atom processor 2Gigs if ram, and a 120GB hdd... It might seem like a joke but that is what I use...
I run a modified windows 10 instal which is debloated and use it only for adb and odin... I don't want to overclock a poor Intel atom as it's hot enough already... I do have a usb drive with an OS but it takes 1 Hour to install and 30 minutes after that to reach the desktop... And not to mention, driver installation, which takes more 20 min, add them up and it's a lot of time!
ljgjm
Senior Member
ljgjm
Senior Member
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
7Just before we get started, I would like to say that you will not brick your device if you follow the steps as is without any, and I mean any deviations.
Read what works and what doesn't first!
Okay, enough preface, let's jump right in!
Firstly, pre-requisites(hardware):-
1.A micro SD card
2. A windows PC, windows 7 or later (32 or 64 bit)
3. A USB Type-C cable
4. A galaxy tab A7 running the latest one ui 4.x build
Pre-requisites (software on PC), you'll need:
1.Stock firmware:
Download the latest firmware from hereSamsung Galaxy Tab A7 (LTE) Firmware Download SM-T505 Free Download
Samsung Galaxy Tab A7 (LTE) Firmware Download...samfw.com
1.1 After downloading it, extract it on the PC and copy the AP file to your micro SD card, as we need it on the tab later
2. Samsung USB drivers
download them from here and install them on your pc, it'll take a while but it's essential for this process
https://developer.samsung.com/android-usb-driver
2.1 Reboot your PC after installing the drivers
3 Download the twrp.img from below
https://xdaforums.com/t/updated-rec...axy-tab-a7-10-4-sm-t500.4358595/post-87038713
(Yes, correct, download the .img as we won't be using Odin to flash custom recovery)
Copy this to your SD card as well
4. Download Canary apk of magisk delta from link below
https://huskydg.github.io/magisk-files/
Copy the apk to your microSD which has the previously extracted AP file
5. Download dynapatch from the file attached below credits to @redymedan for developing this!
Then move it to your micro SD card
6. Download the GSI image of your choice, and (make sure that it doesn't exceed 3.3GB after extraction) extract it from .img.xz format to .img format and then copy it to the micro SD card
(also, if it exceeds 3.3 GB, don't worry,follow the steps in important notes on how to expand your system partition to accommodate larger GSIs...)
7. If your gsi doesn't have gapps or you want to flash a system mod then download a vndklite variant of your gsi, as system is mounted as RW in vndklite gsi, where's system is mounted as read only in normal gsi images
8. Download Odin and extract it
https://samsungodin.com/
9. Download SmartPack kernel manager apk and copy it to the sdcard too
https://github.com/SmartPack/SmartPack-Kernel-Manager/releases
(We will be using this to flash twrp in a later step)
10. Download the brightness and watchdog fix module from below
Copy it to SD card
(Optional) 11. If you don't want your install storage encrypted, download the following two zips and move them to SD card,
[Pie/10/11] [System-as-root] Multidisabler: disables encryption, Vaultkeeper, auto-flash of stock recovery, proca, wsm, cass, etc.
The multi-disabler started life on the Exynos...
xdaforums.com
https://zackptg5.com/downloads/archive/Disable_Dm-Verity_ForceEncrypt_11.02.2020.zip
Process to flash GSI:
1) Unlock the bootloader
To unlock the bootloader, follow the steps from here...
https://xdaforums.com/t/guide-sm-t5...4-unlock-bootloader-root-with-magisk.4185993/
2) After that patch the AP image we copied to the micro SD card earlier and then copy the patched ap to the micro sd card and then to the pc. Steps of patching can be found here
https://xdaforums.com/t/guide-sm-t5...4-unlock-bootloader-root-with-magisk.4185993/
3) After patching the AP image, copy the patched image from downloads folder to your micro sd card
4. After that turn your device off
5. After the device is fully powered off, hold both volume up and volume down buttons simultaneously and connect it to your pc, then click volume up button once during the prompt to enter download mode
6) After entering download mode, select the BL, CP, and CSC (do not choose HOME_CSC!) files from the extracted firmware, after doing that, for AP, select the patched AP file we copied earlier and then click start on Odin.
7. After the flash is successfully finished, reboot your device and set it up, after setup install the magisk Canary apk from the micro SD card
8. After installing the apk, open it, and click 'OK' on additional setup prompt and the device will reboot after a few seconds
9. After the reboot completes, install the smart pack kernel manager apk we put in the SD card earlier, then open it, then, navigate to
Tools>Backup>(swipe to the right where it says "boot partition")> it changes to recovery partition> click on the plus symbol> two options show up, select the flash recovery option> select the twrp image from SD card (file manager opens automatically)> click on "select" and then flash it...
10. Then open magisk delta app, and reboot to recovery
11. After rebooting to recovery, flash dynapatch
12. Then reboot to recovery (very important)
(Optional)12.1 Flash multidisabler we downloaded earlier, along with disable dm Verity to disable FBE on integral storage. Also, if you intend to disable encryption, do flash both the zips not one.
13. Then select install>Micro SD Card>install image> select GSI image you downloaded> select System Image > swipe to flash, then factory reset and wipe data from within twrp (thank you @shorty9210 for the factory reset part!)
14. Here, hectic nature of you must be used...
15. Boot to your GSI, and set it up as fast as possible as a watchdog crash is triggered every 30-50 seconds which causes a reboot
16. Install magisk apk and reboot for additional setup
17. After reboot, open magisk and install the brightness and watchdog fix module
18. Reboot the device after installing module
19. At this point you won't get random reboots
20. Now you can enjoy your GSI...
Now, onto what works and what doesn't...
Working:
Boot
Touchscreen
Sound
WiFi
Bluetooth
Mobile data
Camera
Microphone
Doze
OTG
Power buttons
Volume buttons
Charging
Rotation
Gyroscope
Calling(works with VoIP)
USB tethering
MTP
Auto brightness
Not working:
VoLTE
In call audio (in case of Sims)
Offline charging
Cast
Untested:
-
Tested roms:
1. Trebledroid GSIs (don't use, as magisk doesn't work and gapps can't be properly installed for some reason)
2. Pixel experience ( magisk works and it's stable after running the watchdog command)
3. Google GSI (vanilla and Gapps, not recommended, due to it being extremely barebones and not having fixes for DT2W, and headsets)
4. Project Elixir (needs watchdog module, but mostly stable)
5. A14 Pixel OS (doesn't need watchdog and brightness fix module)
Now credits!
To team XDA for keeping this forum alive and well,
@phhusson for developing GSI images that actually made this possible
@topjohnwu for creating magisk
@agreenbhm for the TWRP image and for helping me,
@duyfken for correcting the firmware links, and also, for informing me to add the type of GSI for this device!
@shorty9210 for a correction
@huskydg for magisk delta development
And finally all other members of XDA for taking interest in the modding scene,
Thank you!
I've been thinking of building overlays for this device, along with some way to have VoLTE running using frameworks from the stock firmware.
Important notes:
1. If your GSI has phh settings, do the following...
1.1 Enable double tap to wake
Settings>Phh Treble settings>Samsung features >Tick "Enable difficult tap to wake"
1.2 For making headphones work,
Settings>Phh Treble settings>Misc features>Tick "Use alternate way to detect headsets"
Also, Enable developer options>Enable "Disable Bluetooth A2DP hardware offload" and restart when prompted
2. If the gsi ROM you're trying to flash doesn't fit on current system partition, then,
*This process will wipe your system partition and will reset your recovery, so, keep the dynapatch zip and gsi image on hand, you will need it!*
Download latest platform tools from AOSP site, link below
https://developer.android.com/studio/releases/platform-tools
https://xdaforums.com/t/recovery-un...xy-tab-a7-10-4-sm-t500.4371123/#post-86050459
a) download the product.img from above link
b)Reboot to recovery from magisk app, then, in twrp, click on 'Reboot' button
c) click 'fastboot'
d) the device will now reboot and then after a few seconds, a twrp ui will appear with the text 'fastboot'
e) connect your device to a pc with the latest version of platform tools and drivers installed
f) run these commands in order
fastboot flash product product.img
fastboot erase system
fastboot resize-logical-partition system 3940000000
fastboot reboot recovery
g) after doing so, again reboot to recovery, flash dynapatch zip first
h) again reboot to recovery and flash your gsi image
i) this time images up to 3.9GB will be flashable
j) no need to format data if you're flashing same rom
And that's it you'll be able to enjoy bigger ROMs on your Galaxy Tab A7!
3. follow steps from here to get 4-speaker audio!
Post in thread '[ROM][SM-T500] Samsung Galaxy Tab A7 10.4 (2020) - LineageOS 19.1 (and TWRP 3.6.1)'
4. Previously, we had to use either some magisk modules or SmartPack kernel manager to enable swap so that the device won't crash under load, but, now, 2GB of swap is allocated by default, which is plenty sufficient for daily usage, so, i recommend you not to use any modules or services that enable swap....
5. Note that this step is not needed for Android 14 gsis
If zygisk is enabled after module is installed, some users reported that it breaks brightness fix, to remedy that, try flashing permissiver_v5 from below in twrp
Permissiver_v5.zip | by erfanoabdi for Generic Device/Other
Download GApps, Roms, Kernels, Themes...androidfilehost.com
6. Also, please do not rely on extra dim if brightness fix module won't work, try above step , i did this previously and the edges of my screen got ruined(ghost imaging) due to the heat...
7. Please refrain from using any modules that spoof the device identity as it causes the phh Treble app to not display "Samsung features" at which point you can't use DT2W, so beware...
8. Recommended settings in magisk delta
a)magisk delta>settings>hide magisk app, you will be prompted to allow magisk delta to install apps, allow it and start the hiding> now, the magisk app will be under an alias you chose
b)magisk delta>settings>Zygisk(enable)
c)magisk delta>settings>Bootloop Protection (enable)
d)magisk delta>settings>Magisk Hide
9. Want to pass play integrity? Please search for it, it's a huge mess at the moment
10. Just a heads up, be sure to only download GSIs from the list in @phhusson GitHub, i.e, link below,
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
And, do not spend money on people that claim to give the "best GSIs" or whatever gibberish they use, only spend money as a donation to a developer, if you really enjoy their work, and would like to support them to keep up thier interest!
I had to mention this to put you on the cautious side of things!
11. This is fixed in most A14 GSIs
Taskbar height is incorrect on some roms, and the magisk module from below link fixes it, credits to @wEER1234 for mentioning this, and to @Coxxs for delaying developing it!
12. This is for improving the longevity of your device
12.1 To prolong the lifespan of your battery, install the "acc" magisk module, reboof, open a root terminal and run the following commands
acc -s mcc=200
acc -s mcc=3900
The first command limits the charging current to 200 mA and charges the battery at a power of 1.8W which greatly reduces the strain and heat evolved by the battery, and the second command only allows your battery to charge up to 3.9v (52%), as according to battery University, maximum cycles can be achieved by maintaining the voltage battery 3.9 and 3.7
12.2 This is to reduce the Power and heat evolved by the processor
Install smart pack kernel manager, grant root access, go to cpu section, and do the following
Big cpu cores:
Maximum frequency:1056Hz
Minimum frequency:902Hz
Little cpu cores:
Maximum frequency: 1017Hz
Minimum frequency:864Hz
At these frequencies the device stays stable and relatively less hot than at higher clocks...
13. Be sure to expand the system partition using step 2, and also avoid flashing vndklite GSIs. Normal gsi images have the highest chance of booting.2
Hey all, it's been a long while, but here's a small peek into what I was ble to run on latest one ui 4.x vendor this weekend, I will update the future soon on how to run A13 GSIs...2Thank you for the guide. I am running AndyYan's LineageOS 19.1 on my SM-T505. The fixes for the non-working brightness slider proposed in several threads here on XDA did not work for me (maybe it is Android 12, maybe the securize option; it seems that phh-on-boot.sh is not really used, although my partition is RW and the file is patched successfully).
I therefore made a Magisk module that issues the "echo 100 > ..." command mentioned in the OP after every boot. See attached. Just flash as a Magisk module.2Hey everyone, I'm going to stop updating this post from now on, as I'm going back to stock soon...
Add once this device gets its last update, I'll come back to the modding scene again!
It was a wild ride, and I learnt a lot on the way, but, it's time I bid my farewell, goodbye for now!1
I didn't mention it, as I found out that extra dim intensity control does the job just fine, but I'll add it in either way, thanks!
