[SM_G973U/U1/W_Snapdragon]-[Upgrade Easily Android 10 To 11 Using Odin]-[Automatically Root Remove Forceencrypt Patch Bluetooth And Fix Safetynet]

Search This thread

jrkruse

Recognized Contributor
Aug 9, 2009
8,150
12,362
Must Have An Unlocked Bootloader To Do This!

This An odin tar file I have created to flash along with stock odin firmware to automatically install TWRP recovery along with Disable VBMETA image. The tar file will also automatically install magisk root along with remove force encryption and patch bluetooth library file. It will also patch safetynet. No flashing of zips is required

Info For Bootloader Unlocks Can Be Found In Post 2

I Do Not Recommend Mixing Bit 4 And Bit 5 Firmware!!!!

Downloads
SM-G973U/U1/W- Model

I do not recommend mix bit 4 and bit 5 firmware however if you choose too do so please use the files below the contain V1 Files
These contains bootloaders from One UI 3.0 firmware so you will not loose token and do not need to alter firmware you are flashing
If you choose too do so they contain bootloaders too allow you too load stock AP and Home_CSC of One UI 3.1 firmware in odin without having to worry about removing certain files as the bootloaders in the USERDATA file will keep you on the correct bootloaders.

USERDATA_AIO_G973_FORCE_WIPE_V1_FILES.tar.md5 --Use only on android 11
This will force a wipe of data no mater what. This Must Be Used On U1 Firmware and can be used on U firmware if you choose so.

USERDATA_AIO_G973_NO_WIPE_V1_FILES.tar.md5 --Use only on android 11
This will only wipe if you have encrypted data. This Can Only Be Used On U firmware

These do not contains bootloaders from One UI 3.0 firmware and you will loose token if you flash higher version bootloaders unless you alter the firmware. You can use these to do the firmware as you see fit.
USERDATA_AIO_G973_FORCE_WIPE_NO_BL.tar.md5 --Use on android 10 or 11
This will force a wipe of data no mater what. This Must Be Used On U1 Firmware and can be used on U firmware if you choose so.

USERDATA_AIO_G973_NO_WIPE_NO_BL.tar.md5 --Use on android 10 or 11
This will only wipe if you have encrypted data. This Can Only Be Used On U firmware


Odin3_v3.14.1_3B_PatcheD.zip

Files For SM-G970 Found Here
Files For SM-G975 Found Here

TWRP Recovery Provide by @afaneh92

Be prepared to have your data wiped. The process tries to determine if you do or do not need to have data wipe but as a precaution just assume your data will be wiped. Especially if using U1 or W firmware

Install Instructions For Newly Unlocked Devices

You must be OEM Unlocked Bootloader
1. On Initial unlock of phone you must through setup and be signed into your google account.

2. Reboot phone too download mode and make sure KG STATUS=CHECKING (see pic) and not PRENORMAL. If PRENORMAL then do step 1 again

photo_2021-02-10_21-27-02.jpg

3. Use patched 3.14 odin and load file USERDATA_SLOT_*9**U_**.tar.md5 you must choose one of the FORCE_WIPE files and load in the USERSDATA slot of odin and flash file

4. Phone will reboot to TWRP and remove encryption which will wipe phone. Phone will reboot back too TWRP to finish install then reboot to setup



Install Instructions For Updating Firmware On Phone Already Unlocked

1. Reboot phone too download mode and make sure KG STATUS=CHECKING. If not see above

2. Use patched 3.14 odin and load stock firmware in appropriate slots use regular CSC file in the CSC slot and load file one of the USERDATA_SLOT_*9**U_**.tar.md5 in the USERSDATA slot of odin and flash firmware. Do not use the User Data file that comes with firmware.

3. Phone will reboot to TWRP and check for encryption and remove if needed which will wipe phone. If phone is not encrypted data will not be wiped. Phone will reboot back too TWRP to finish install then reboot to setup if data was wiped or reboot normally if it was not



Install Instructions If Updating Images With TWRP

1. When done flashing images in TWRP Reboot phone too download mode and make sure KG STATUS=CHECKING. If not see above.

2. Use patched 3.14 odin and load file USERDATA_AIO_*9**_NO_WIPE_NO_BL.tar.md5 in the USERSDATA slot of odin and flash file.

3. Phone will reboot to TWRP and check for encryption and remove if needed which will wipe phone. If phone is not encrypted data will not be wiped. Phone will reboot back too TWRP to finish install then reboot to setup if data was wiped or reboot normally if it was not.

4. Alternatively to using USERDATA_AIO_*9**_NO_WIPE_NO_BL.tar.md5 in odin you can use AIO_Magisk_21_4_S10U_US_Series_Android_R.zip found in post 2



Features
No patches or mod zips are needed phone will already be rooted

Fix Safetynet
Bluetooth is patched for pairing to survive reboots

Samsung Health working


Bugs
Samsung Pay, Secure Folder and Samsung Pass do not work as on most Samsung Rooted Roms


Thanks To People That Make My Life Easier
@elliwigy

@klabit87
@Krog18
@me2151
@stang5litre
@Raymonf for modified odin
@rayan-refoua for boot animation
@TheMadScientist
@afaneh92
@kdrag0n for safetynet fix

3arthur6 for bluetooth patch zip
@JDBarlow for test S20 stuff
 
Last edited:

jrkruse

Recognized Contributor
Aug 9, 2009
8,150
12,362
This is the zip that does the same thing as above odin file does. You can use this if you are updating images via flashing them in TWRP instead of using odin and wish to use the AIO zip instead of using odin

Downloads
SM-G97*U-US Model
AIO_Magisk_21_4_S10U_US_Series_Android_R.zip

SM-G97*W-Canadian Model
AIO_Magisk_21_4_S10W_Canadian_Series_Android_R.zip



Info For Bootloader Unlocks Can Be Found

Another Thread For Bootloader Unlocks Can Be Found
 
Last edited:

jrkruse

Recognized Contributor
Aug 9, 2009
8,150
12,362
I update the tar file so now only one is needed for android 10 or 11 and I and I changed the safenet fix to the latest one that patches your own keystore file thanks @afaneh92 for the module and have it install as a magisk module so it doesnt affect system files that way if a bettery way comes out you can simply update the module and not have too worry about replacing system files. If you have used my old tar to root your phone I suggest reflashing stock firmware in odin along with my new tar file and this will remove the safetynet files from system and too the module
 
  • Like
Reactions: afaneh92

jrkruse

Recognized Contributor
Aug 9, 2009
8,150
12,362
Fixed issues where if bluetooth or keystore files are already patched in system by other means then my installer will just skip them instead of failing during flash
 
  • Like
Reactions: afaneh92

Top Liked Posts

  • There are no posts matching your filters.
  • 6
    Must Have An Unlocked Bootloader To Do This!

    This An odin tar file I have created to flash along with stock odin firmware to automatically install TWRP recovery along with Disable VBMETA image. The tar file will also automatically install magisk root along with remove force encryption and patch bluetooth library file. It will also patch safetynet. No flashing of zips is required

    Info For Bootloader Unlocks Can Be Found In Post 2

    I Do Not Recommend Mixing Bit 4 And Bit 5 Firmware!!!!

    Downloads
    SM-G973U/U1/W- Model

    I do not recommend mix bit 4 and bit 5 firmware however if you choose too do so please use the files below the contain V1 Files
    These contains bootloaders from One UI 3.0 firmware so you will not loose token and do not need to alter firmware you are flashing
    If you choose too do so they contain bootloaders too allow you too load stock AP and Home_CSC of One UI 3.1 firmware in odin without having to worry about removing certain files as the bootloaders in the USERDATA file will keep you on the correct bootloaders.

    USERDATA_AIO_G973_FORCE_WIPE_V1_FILES.tar.md5 --Use only on android 11
    This will force a wipe of data no mater what. This Must Be Used On U1 Firmware and can be used on U firmware if you choose so.

    USERDATA_AIO_G973_NO_WIPE_V1_FILES.tar.md5 --Use only on android 11
    This will only wipe if you have encrypted data. This Can Only Be Used On U firmware

    These do not contains bootloaders from One UI 3.0 firmware and you will loose token if you flash higher version bootloaders unless you alter the firmware. You can use these to do the firmware as you see fit.
    USERDATA_AIO_G973_FORCE_WIPE_NO_BL.tar.md5 --Use on android 10 or 11
    This will force a wipe of data no mater what. This Must Be Used On U1 Firmware and can be used on U firmware if you choose so.

    USERDATA_AIO_G973_NO_WIPE_NO_BL.tar.md5 --Use on android 10 or 11
    This will only wipe if you have encrypted data. This Can Only Be Used On U firmware


    Odin3_v3.14.1_3B_PatcheD.zip

    Files For SM-G970 Found Here
    Files For SM-G975 Found Here

    TWRP Recovery Provide by @afaneh92

    Be prepared to have your data wiped. The process tries to determine if you do or do not need to have data wipe but as a precaution just assume your data will be wiped. Especially if using U1 or W firmware

    Install Instructions For Newly Unlocked Devices

    You must be OEM Unlocked Bootloader
    1. On Initial unlock of phone you must through setup and be signed into your google account.

    2. Reboot phone too download mode and make sure KG STATUS=CHECKING (see pic) and not PRENORMAL. If PRENORMAL then do step 1 again

    photo_2021-02-10_21-27-02.jpg

    3. Use patched 3.14 odin and load file USERDATA_SLOT_*9**U_**.tar.md5 you must choose one of the FORCE_WIPE files and load in the USERSDATA slot of odin and flash file

    4. Phone will reboot to TWRP and remove encryption which will wipe phone. Phone will reboot back too TWRP to finish install then reboot to setup



    Install Instructions For Updating Firmware On Phone Already Unlocked

    1. Reboot phone too download mode and make sure KG STATUS=CHECKING. If not see above

    2. Use patched 3.14 odin and load stock firmware in appropriate slots use regular CSC file in the CSC slot and load file one of the USERDATA_SLOT_*9**U_**.tar.md5 in the USERSDATA slot of odin and flash firmware. Do not use the User Data file that comes with firmware.

    3. Phone will reboot to TWRP and check for encryption and remove if needed which will wipe phone. If phone is not encrypted data will not be wiped. Phone will reboot back too TWRP to finish install then reboot to setup if data was wiped or reboot normally if it was not



    Install Instructions If Updating Images With TWRP

    1. When done flashing images in TWRP Reboot phone too download mode and make sure KG STATUS=CHECKING. If not see above.

    2. Use patched 3.14 odin and load file USERDATA_AIO_*9**_NO_WIPE_NO_BL.tar.md5 in the USERSDATA slot of odin and flash file.

    3. Phone will reboot to TWRP and check for encryption and remove if needed which will wipe phone. If phone is not encrypted data will not be wiped. Phone will reboot back too TWRP to finish install then reboot to setup if data was wiped or reboot normally if it was not.

    4. Alternatively to using USERDATA_AIO_*9**_NO_WIPE_NO_BL.tar.md5 in odin you can use AIO_Magisk_21_4_S10U_US_Series_Android_R.zip found in post 2



    Features
    No patches or mod zips are needed phone will already be rooted

    Fix Safetynet
    Bluetooth is patched for pairing to survive reboots

    Samsung Health working


    Bugs
    Samsung Pay, Secure Folder and Samsung Pass do not work as on most Samsung Rooted Roms


    Thanks To People That Make My Life Easier
    @elliwigy

    @klabit87
    @Krog18
    @me2151
    @stang5litre
    @Raymonf for modified odin
    @rayan-refoua for boot animation
    @TheMadScientist
    @afaneh92
    @kdrag0n for safetynet fix

    3arthur6 for bluetooth patch zip
    @JDBarlow for test S20 stuff
    3
    This is the zip that does the same thing as above odin file does. You can use this if you are updating images via flashing them in TWRP instead of using odin and wish to use the AIO zip instead of using odin

    Downloads
    SM-G97*U-US Model
    AIO_Magisk_21_4_S10U_US_Series_Android_R.zip

    SM-G97*W-Canadian Model
    AIO_Magisk_21_4_S10W_Canadian_Series_Android_R.zip



    Info For Bootloader Unlocks Can Be Found

    Another Thread For Bootloader Unlocks Can Be Found
    1
    I update the tar file so now only one is needed for android 10 or 11 and I and I changed the safenet fix to the latest one that patches your own keystore file thanks @afaneh92 for the module and have it install as a magisk module so it doesnt affect system files that way if a bettery way comes out you can simply update the module and not have too worry about replacing system files. If you have used my old tar to root your phone I suggest reflashing stock firmware in odin along with my new tar file and this will remove the safetynet files from system and too the module
    1
    Fixed issues where if bluetooth or keystore files are already patched in system by other means then my installer will just skip them instead of failing during flash
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone