Soft Bricked LG G Pad 7.0 (v410) Boots to TWRP

[laxfan91]

I was a complete idiot and accidentally deleted the internal storage on my G Pad 7.0 v410. I can still boot into TWRP. I've tried flashing stock and Skinny ROM. They are successful according to TWRP, but I cannot boot into anything besides TWRP.

All attempts to sideload in ADB have failed. All attempts to factory reset or wipe dalvik multiple times worked, but did not help. I am currently at a loss for what to do next.

 

[majicmazo]

Fixed finally!!!

this took me hours of searching plase hit thanks
1. if you dont have adb setup adb you can get a minimal adb here
https://docs.google.com/file/d/0B1S0LCuXCnnmSWh6NGJmSE1BUWc/edit
install it, navigate to program files (Or if your on a 64bit system program files(x86)
Right click and click "Open command window here"
plug in your device if it isnt already pluged in, and type the following commands pressing ENTER after each line
DO NOT COPY PASTE THE WHOLE THING EACH LINE MUST BE PRESSED ENTERED separately
adb shell

dd if=/dev/block/platform/msm_sdcc.1/by-name/fota of=/sdcard/fota-backup.img

dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota

exit

adb reboot

Your phone should boot into your rom now

I was a complete idiot and accidentally deleted the internal storage on my G Pad 7.0 v410. I can still boot into TWRP. I've tried flashing stock and Skinny ROM. They are successful according to TWRP, but I cannot boot into anything besides TWRP.

All attempts to sideload in ADB have failed. All attempts to factory reset or wipe dalvik multiple times worked, but did not help. I am currently at a loss for what to do next.

 

[laxfan91]

I will try this when I have a chance. Thanks for your help!

 

[laxfan91]

I will try this when I have a chance. Thanks for your help!

I tried this but it didn't work. I tried adb sideload and directly used the commands in twrp's terminal command.

 

[gmw77]

Worked like a charm

This saved me! I am not sure what I did wrong but this did the trick. Thanks a million for sharing!!!!

 

[cool55t]

Holy crap i love you!!! My tablet decided it wanted to do a system update while i was sleeping after i told it not to. Long story short the commands worked!! and i have a working device now!
Thank you
thank you
thank you

 

[IlNobody-]

Boot : Error Certification Verify

Hi. I am new to this thread although i had used this thread many times with issues i have had. There is this one issue im having that i can't seem to figure out which im usually good at doing by following forums or threads.

A couple weeks ago i had rooted my LG G Pad 7.0 V410 LTE tablet from AT&T. I had TWRP downloaded into it and i had flashed Candy5 it worked perfectly i just didn't like how it looked so i tryed to flash it back to original stock OS. But now when i boot my tablet up it goes to the LG screen and at the top left it says Boot : Error Certification Error. This has me dumbfounded on what i should do. when i connect the tablet to the computer nothing pops up no tablet connects to the computer. I tryed downloading the drivers and everything but nothing seemed to work. I need help with this issue please!!

I didn't know where else to post this issue due to being new!!!

 

[jgro1976]

This worked for me, THANK YOU, however, I thought I would try to flash the LG Lollipop update to the device, it downloads, but when I go to install it, it reboots straight back into TWRP. How can I replace TWRP with the factory recovery and unroot the damn thing??

 

[tsirhcitna]

Hi. I am new to this thread although i had used this thread many times with issues i have had. There is this one issue im having that i can't seem to figure out which im usually good at doing by following forums or threads.

A couple weeks ago i had rooted my LG G Pad 7.0 V410 LTE tablet from AT&T. I had TWRP downloaded into it and i had flashed Candy5 it worked perfectly i just didn't like how it looked so i tryed to flash it back to original stock OS. But now when i boot my tablet up it goes to the LG screen and at the top left it says Boot : Error Certification Error. This has me dumbfounded on what i should do. when i connect the tablet to the computer nothing pops up no tablet connects to the computer. I tryed downloading the drivers and everything but nothing seemed to work. I need help with this issue please!!

I didn't know where else to post this issue due to being new!!!

This worked for me, THANK YOU, however, I thought I would try to flash the LG Lollipop update to the device, it downloads, but when I go to install it, it reboots straight back into TWRP. How can I replace TWRP with the factory recovery and unroot the damn thing??

As a general rule, when you can't access recovery, or you need to go back to stock etc etc you have to go into DOWNLOAD MODE and use an official or unofficial tool to go back to stock. It will remove twrp root etc etc but at least you'll have a working device and you can start rooting again.
This is a guide for the 8.3 but it should work on yours.
To put your device in download mode turn it off, press and keep pressing vol+, then connect the cable. If the official tool isn't working, you can use lgflashtool 2014 and follow this guide (the only difference should be that the official tool download the factory image from the internet while the unofficial one let you use an already downloaded one. If you use the unofficial version, be sure to download the CORRECT firmware for your tablet. I don't know if at&t require a special version, look it up.

 

[Dwsdad]

Having read this thread and trying everything here plus other things, I still have a bricked LG V410.

I'm using Linux. Doing lsusb shows the device, but thats about as far as it goes.
from lsusb: Bus 001 Device 012: ID 1004:61f1 LG Electronics, Inc.
from adb devices: List of devices attached
from mtp-detect: libmtp version: 1.1.8

Listing raw device(s)
Device 0 (VID=1004 and PID=61f1) is a LG Electronics Inc. Android phone (ID1).
Found 1 device(s):
LG Electronics Inc.: Android phone (ID1) (1004:61f1) @ bus 1, dev 12
Attempting to connect device(s)
PTP_ERROR_IO: failed to open session, trying again after resetting USB interface
LIBMTP libusb: Attempt to reset device
LIBMTP PANIC: failed to open session on second attempt
Unable to open raw device 0
OK.

So, it appears as though Linux can see the device, but that's about it. Interestingly, if I put the device into Download mode (holding down the Up Vol while plugging in the USB cable), Linux will not see the device.

I can also put it into Factory Reset mode using the combination of keys, but that just get it stuck at Factory Resetting on the screen. I've even left it like that overnight and it's still sitting like that the next day.

I'm open to any ideas you folks may have.

 

[Dwsdad]

I have to backtrack a tad. Putting the device in Download mode, Linux DOES see the device in lsusb.

Bus 001 Device 013: ID 1004:633e LG Electronics, Inc.

and MTP-detect:
libmtp version: 1.1.8

Listing raw device(s)
Device 0 (VID=1004 and PID=633e) is UNKNOWN.
Please report this VID/PID and the device model to the libmtp development team
Found 1 device(s):
1004:633e @ bus 1, dev 13
Attempting to connect device(s)
PTP_ERROR_IO: failed to open session, trying again after resetting USB interface
LIBMTP libusb: Attempt to reset device
LIBMTP PANIC: failed to open session on second attempt
Unable to open raw device 0
OK.

Nothing showing in adb-detect.

dmesg shows:
usb 1-2: new high-speed USB device number 13 using ehci-pci
[25853.613194] usb 1-2: New USB device found, idVendor=1004, idProduct=633e
[25853.613211] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[25853.613222] usb 1-2: Product: LGE Android Phone
[25853.613232] usb 1-2: Manufacturer: LG Electronics Inc.
[25853.613241] usb 1-2: SerialNumber: LGV410c72bceb9

 

[Tweaker7376]

Thank you so much!! Worked like a charm!

 

[b52apl]

I can only boot to cyanogen recovery on my LG V410. But when I try to use adb for your fix, adb devices shows unauthorised. How can I get around that?

 

[mychal86]

Helppp!!!

My lg g pad 7 LG-LK430 is soft brick,
when i turn it on it get stuck sprint spark boot screen but i can go into download mode ,recovery and i dont have a custom recovery
can u help me what i can do all the stuff i found is missing files like the the lg flash tool but i dont have the kdz file and i dont know how to use fastboot or adb

 

[roirraW "edor" ehT]

my lg g gpad 7 LG-LK430 is soft brick from this i try to do all of it when i turn it on it get stuck sprint spark boot screen and i can go into download mode and recovery but i dont have a custom recovery can u help me what i can do all the stuff i found is missing stuff the the lg flash tool but i dont have the kdz file and i dont know how to use fastboot

I'm not trying to be a pain but when you use all lowercase *and* no punctuation it makes it really hard to read.

 

[mychal86]

I'm not trying to be a pain but when you use all lowercase *and* no punctuation it makes it really hard to read.

hey look at it again i changed it

 

[roirraW "edor" ehT]

hey look at it again i changed it

I have a VK810 otherwise I'd help, sometimes I can help with other variants depending on the issue - someone else will have to answer.

 

[phatphil101]

Thank you forever!!

Ive been trying to figure this out forever. My 5 y/o son thanks you too!

 

[lamp216]

hi, i brick my v410, and i was able to enter download mode so, i use lg flashtool and flash this kdz v41007h_0.kdz the ATT test kdz, all god but i lost internal memory, only have 4 gb avaliable, any idea?

 

[Tweaker7376]

hi, i brick my v410, and i was able to enter download mode so, i use lg flashtool and flash this kdz v41007h_0.kdz the ATT test kdz, all god but i lost internal memory, only have 4 gb avaliable, any idea?

http://forum.xda-developers.com/showthread.php?t=3232150

Sent from my Atari 2600