• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!
  • Fill out your device list and let everyone know which phones you have!    Edit Your Device Inventory

Solution dead p9 (bootloader locked - FPR lock) test point !

Search This thread

albelushi7

Senior Member
May 11, 2016
154
21
Hi :)

Not responsible for anything that happens to your phone:good:

sometimes bricked phone
this You will have a short explanation of how to fix your phone if dead p9

This is tried by me and worked!;)

so You need two things to Flash With Testpoint -Board Firmware /Huawei Flash tools IDT
-Download Board Firmware
-Run Huawei Flash tools IDT/ Click on Setting’s Icon
-load the XML File
-Connect Phone and use test Point
-Now Click Start
:)
see attachments


Board Firmware for Huawei P9 (EVA-L19) https://www.dropbox.com/s/0bk8cy6jn7hcfjw/EVA-L19_Board_Software.zip?dl=0

thanks;)
 

Attachments

  • Capture-18.jpg
    Capture-18.jpg
    37.7 KB · Views: 1,114
Last edited:
  • Like
Reactions: zgfg

zgfg

Senior Member
Oct 10, 2016
5,454
2,778
Thanks, excellent to have TestPoints instructions for P9.
Please check/clarify couple of questions:

- Screenshots 1-4 cannot be loaded (only preview thumbnails are available), please check.
Tried by Chrome on the phone and Edge on PC.

- TestPoint pin from photo 5 has to be short-connected to the metal chasis on the phone?
Also, battery should be disconnected or not?

- Could you please upload Board img to Mega or GDrive instead of UpToBox?
Free account on UpToBox requires mallware popups, and even when allowed I was not able to download (maybe firewall or so).

- Board image by name says L19 (dual SIM), is this image also good for L09 (single SIM)?

- Are these right links for IDT Tool:
https://androidhost.ru/1Lgv
and for USB driver:
http://www.mediafire.com/file/ob6ii95ybktzb5n/HUAWEI_USB_COM_1.0_driver.zip/file

- IDT Tool is for Windows, so only Windows 7 or newer is needed, no Linux (Virtual Machine)?

- XML file you mentioned comes with Board rar or must be downloaded (and where from)

- What is the next step upon flashing the Board image:
Does the phone boot to System, and if so, to EMUI 4 or 5 (MM or N) and which cust (cXXX)?
Is that still then RND90m test-keys firmware that must be flashed by e.g. DLOAD to finish unbricking?

- What about IMEI, Vendor, etc - did you have to repair them and how (HCU Client)?

PS: Guide for opening P9 (last steps on disconnecting fingerprint sensor and removing battery to be skipped):
https://www.ifixit.com/Guide/Huawei+P9+Battery+Replacement/77706
 
Last edited:
  • Like
Reactions: Tecalote

albelushi7

Senior Member
May 11, 2016
154
21
Thanks, excellent to have TestPoints instructions for P9.
Please check/clarify couple of questions:

- Screenshots 1-4 cannot be loaded (only preview thumbnails are available), please check.
Tried by Chrome on the phone and Edge on PC.

- TestPoint pin from photo 5 has to be short-connected to the metal chasis on the phone?
Also, battery should be disconnected or not?

- Could you please upload Board img to Mega or GDrive instead of UpToBox?
Free account on UpToBox requires mallware popups, and even when allowed I was not able to download (maybe firewall or so).

- Board image by name says L19 (dual SIM), is this image also good for L09 (single SIM)?

- Are these right links for IDT Tool:
https://androidhost.ru/1Lgv
and for USB driver:
http://www.mediafire.com/file/ob6ii95ybktzb5n/HUAWEI_USB_COM_1.0_driver.zip/file

- IDT Tool is for Windows, so only Windows 7 or newer is needed, no Linux (Virtual Machine)?

- XML file you mentioned comes with Board rar or must be downloaded (and where from)

- What is the next step upon flashing the Board image:
Does the phone boot to System, and if so, to EMUI 4 or 5 (MM or N) and which cust (cXXX)?
Is that still then RND90m test-keys firmware that must be flashed by e.g. DLOAD to finish unbricking?

- What about IMEI, Vendor, etc - did you have to repair them and how (HCU Client)?

PS: Guide for opening P9 (last steps on disconnecting fingerprint sensor and removing battery to be skipped):
https://www.ifixit.com/Guide/Huawei+P9+Battery+Replacement/77706

You are welcome!

I have seen. Now uploaded to another link check here
https://ibb.co/sjQZ8km
https://ibb.co/K6bfnvP
https://ibb.co/KL8wwd7
https://ibb.co/T14ZRfH
https://ibb.co/9NTCCyd
https://ibb.co/V9LQDQz
You don't need to use just the pin on the test point, you don't need to remove the battery.

also UpToBox work fine and you can Download !
I will try uploading the file on another web site:D

i try on eva L19 (dual SIM) , but Some testers said working on single SIM
You can use this version if it works for you or higher-IDT:)
Will be your phone system EMUI 4 so you can use DLOAD To update and install the full system.
 

zgfg

Senior Member
Oct 10, 2016
5,454
2,778
Thank you for answering.

I don't have a bricked P9 to try (and don't want to experiment with the one running Oreo) - but it would be interesting e.g. to see if by Board flashing that L19 image, if L09 can be turned to dual SIM (I've experimented by rebranding L09 to L19, also by rolling back to MM, but was never able to make it to recognize the second SIM)

Mega free account allows you 50 GB upload, others can open your Share simply from browser or from Mega app, no counting down 30 seconds, no robot catcha, no mallware notifications, you can try:
https://mega.nz/#F!JwkVyRya!Rb7OUE0z3PEpXBRxGOM-vQ

I tried downloading again from Uptobox link, had to Stop DNS66 to open the page, to wait 30 seconds to get it green, to Allow notifications - then received three annoying ads (you-are-lucky-winner-one-of-ten-thousand and alike) from notification center com in less than a minute, but still did not manage how to start downloading

I tried on laptop today earlier at work, had also troubles with notifications - I opened the first, hoping it would be your img but it opened an ad girls-from-less-than-15-minutes-away, with sound - pretty embarrassing, you can imagine ;-(
 
Last edited:

albelushi7

Senior Member
May 11, 2016
154
21
lol man
Have you entered password before downloading from the web site?

To clarify more this method opens such as door or point in the phone to enter the files to the phone and installed in some way!
In fact was tried on oreo 8 but worked:)

The file is currently uploaded. Wait for the process to complete and I will attach the link here or in the thread:)
@zgfg Check if you can now view and download the file link No password No ads, just direct download and extract the file https://www.dropbox.com/s/0bk8cy6jn7hcfjw/EVA-L19_Board_Software.zip?dl=0 also in thread.
 
Last edited:
  • Like
Reactions: zgfg

zgfg

Senior Member
Oct 10, 2016
5,454
2,778
lol man
Have you entered password before downloading from the web site?

To clarify more this method opens such as door or point in the phone to enter the files to the phone and installed in some way!
In fact was tried on oreo 8 but worked:)

The file is currently uploaded. Wait for the process to complete and I will attach the link here or in the thread:)

@zgfg Check if you can now view and download the file link No password No ads, just direct download and extract the file https://www.dropbox.com/s/0bk8cy6jn7hcfjw/EVA-L19_Board_Software.zip?dl=0 also in thread.
Thanks, downloaded now from DropBox

In the meantime I also downloaded from UpToGo (with one more embarrasing popup), but now from DropBox (direct download to device) it goes cca 5 times faster

Please check on the screenshot - are those all the tools needed for your TestPoints method for P9

I found (at another TP instructions but for the other Huawei phone) and downloaded some
Huawei_Smartphone_Multi_Download_Software_v1.0.0.2.exe
- you didn't mention, this is not needed (?)

Just to know is it all and correct :?
 

Attachments

  • Screenshot_20191106_121430_com.mixplorer.jpg
    Screenshot_20191106_121430_com.mixplorer.jpg
    129.4 KB · Views: 343
Last edited:

albelushi7

Senior Member
May 11, 2016
154
21
Thanks, downloaded now from DropBox

In the meantime I also downloaded from UpToGo (with one more embarrasing popup), but now from DropBox (direct download to device) it goes cca 5 times faster

Please check on the screenshot - are those all the tools needed for your TestPoints method for P9

I found (at another TP instructions but for the other Huawei phone) and downloaded some
Huawei_Smartphone_Multi_Download_Software_v1.0.0.2.exe
- you didn't mention, this is not needed (?)

Just to know is it all and correct :?

You don't need that, the files I use you need driver in your PC and xml file from Board Firmware
and IDT
 

Guigehlen

Member
Feb 5, 2020
11
1
Hello, if i have a board firmware from EVA-L09 (beacause my phone is the L09) that should work to?

And how do I use the Test Point? I need to open my phone and press that part showed on the picture?

Sorry for the silly questions, but I'm not very familiar with that area!
 

ErikChimello

Member
May 20, 2019
13
4
Hi, y'all! I hope you can help me.
I got my Huawei P8 Lite (ALE-L21) hard bricked, I guess. It's stuck in rescue mode with these errors:
Func NO: 10 (boot image)
Error NO: 2 (load failed!)
I'm trying to find a way to solve it and I ran into IMAGE Download Software. I also downloaded the board firmware, which has an XML file called HL3ALICEMAA001077 inside. Is it the right version?
I'm able to get the phone recognized by the PC without test points. I think this might be the solution to my problem, but I want to be sure before I do other damage. Could you explain to me what exactly a board firmware is? What does that XML file?
The software also requires to link a Model.dll file, is it the one contained in its folder?
Thank you in advance.
 

artadi

New member
Apr 6, 2020
1
0
No dont require dll, just one xml file, and how u do test point ? did u have picture ? explain that.
Most of cases usign IDT u will lose imei.

i got eror pliz help
usb1:Start downloading with Fastboot!
usb1:nPosID = 1.
usb1:Waitting image files prepared...
usb1:I'm Loading image files...
usb1:eek:KAY471859200
usb1:eek:KAY471859200
usb1:eek:KAY471859200
usb1:eek:KAY471859200
usb1:eek:KAY471859200
usb1:eek:KAY471859200
usb1:eek:KAY471859200
usb1:eek:KAY471859200
usb1:eek:KAY471859200
usb1:eek:KAY471859200
usb1:eek:KAY471859200
usb1:eek:KAY471859200
usb1:eek:KAY471859200
usb1:eek:KAY471859200
usb1:eek:KAY471859200
usb1:eek:KAY471859200
usb1:eek:KAY471859200
usb1:eek:KAY471859200
usb1:eek:KAY471859200
usb1:eek:KAY471859200
usb1:eek:KAY471859200
usb1:eek:KAY471859200
usb1:eek:KAY471859200
usb1:eek:KAY471859200
usb1:target reported max download size of 471859200 bytes
usb1:sparse file len = 468666612 bytes
usb1:sparse file len = 456352024 bytes
usb1:sparse file len = 449634000 bytes
usb1:eek:KAY471859200
usb1:eek:KAY471859200
usb1:eek:KAY471859200
usb1:eek:KAY471859200
usb1:eek:KAY471859200
usb1:eek:KAY471859200
usb1:Load image files success.
usb1:Downloading...
usb1:Sending "xloader"
usb1:eek:KAY
usb1:Writing "xloader"
usb1:FAILCommand not allowed
usb1:FAILCommand not allowed
usb1:Midway download fail, disconnected
FAIL (61 s). Error (39)
 

Blueztrixx

New member
Apr 30, 2020
1
0
Test point firmware for Honor 8 FRD-L09 pls

Hello people, i have the issue that my Honor 8 FRD-L09 got bricked. Now i wanted to flash the firmware new with the test point method, and i think this tutorial is the right way to go, thumps up for that :).
But i cant find the right firmware for my device, can anybody give me a link for the firmware or upload it, would be pretty awesome :D.
(sry for bad english xd)

Best regards :)
 

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    Hi :)

    Not responsible for anything that happens to your phone:good:

    sometimes bricked phone
    this You will have a short explanation of how to fix your phone if dead p9

    This is tried by me and worked!;)

    so You need two things to Flash With Testpoint -Board Firmware /Huawei Flash tools IDT
    -Download Board Firmware
    -Run Huawei Flash tools IDT/ Click on Setting’s Icon
    -load the XML File
    -Connect Phone and use test Point
    -Now Click Start
    :)
    see attachments


    Board Firmware for Huawei P9 (EVA-L19) https://www.dropbox.com/s/0bk8cy6jn7hcfjw/EVA-L19_Board_Software.zip?dl=0

    thanks;)
    1
    Thanks, excellent to have TestPoints instructions for P9.
    Please check/clarify couple of questions:

    - Screenshots 1-4 cannot be loaded (only preview thumbnails are available), please check.
    Tried by Chrome on the phone and Edge on PC.

    - TestPoint pin from photo 5 has to be short-connected to the metal chasis on the phone?
    Also, battery should be disconnected or not?

    - Could you please upload Board img to Mega or GDrive instead of UpToBox?
    Free account on UpToBox requires mallware popups, and even when allowed I was not able to download (maybe firewall or so).

    - Board image by name says L19 (dual SIM), is this image also good for L09 (single SIM)?

    - Are these right links for IDT Tool:
    https://androidhost.ru/1Lgv
    and for USB driver:
    http://www.mediafire.com/file/ob6ii95ybktzb5n/HUAWEI_USB_COM_1.0_driver.zip/file

    - IDT Tool is for Windows, so only Windows 7 or newer is needed, no Linux (Virtual Machine)?

    - XML file you mentioned comes with Board rar or must be downloaded (and where from)

    - What is the next step upon flashing the Board image:
    Does the phone boot to System, and if so, to EMUI 4 or 5 (MM or N) and which cust (cXXX)?
    Is that still then RND90m test-keys firmware that must be flashed by e.g. DLOAD to finish unbricking?

    - What about IMEI, Vendor, etc - did you have to repair them and how (HCU Client)?

    PS: Guide for opening P9 (last steps on disconnecting fingerprint sensor and removing battery to be skipped):
    https://www.ifixit.com/Guide/Huawei+P9+Battery+Replacement/77706
    1
    lol man
    Have you entered password before downloading from the web site?

    To clarify more this method opens such as door or point in the phone to enter the files to the phone and installed in some way!
    In fact was tried on oreo 8 but worked:)

    The file is currently uploaded. Wait for the process to complete and I will attach the link here or in the thread:)
    @zgfg Check if you can now view and download the file link No password No ads, just direct download and extract the file https://www.dropbox.com/s/0bk8cy6jn7hcfjw/EVA-L19_Board_Software.zip?dl=0 also in thread.