Solution for battery cover?

[ivorycruncher]

I am absolutely loving my Fascinate (rooted, lag fixed, and de-Binged of course). Awesome upgrade from my Droid Eris! However, I have one major gripe with it so far, and that's the battery cover, or back plate, whatever you wanna call it. I am definitely not a fan of the glossy finish on it. If my fingers are the least bit wet or greasy, it makes it very hard to hold onto. The battery cover on my Eris had some kind of slightly rubberized matte finish, and I never, ever had trouble holding onto that phone.

So, I'm looking for a solution. Ideally, it would be in the form of a direct replacement for the OEM battery cover that is made of the grippy material like the Eris had, but I might settle for some kind of stick-on skin, if there's a good one that will eliminate the slipperiness. I've searched a bit, but haven't found any good solutions yet. Anyone suggestions would be appreciated. Oh, but please don't suggest cases of any kind. I have a good leather belt holster already that the phone fits in perfectly, and adding a wraparound case of any kind would be redundant, and also would prevent the phone from fitting in my current case.

 

[ivorycruncher]

Actually, I think I found a solution, thanks to a thread on the Android Central forums. Stealth Guards is apparently giving away all their screen protectors away for free for a limited time. You pay only the cost of shipping, which for me was $2.85, and the protector was originally $14.99. It's actually a full body protection skin, not just a basic screen protector. I'll probably just use the part for the back, and not mess with the front screen protector part at all. Here's the link:

http://www.stealthguards.com/index.php/cellphones/samsung-fascinate-full-body-protection.html

Note that they have free protector kits for most all the popular phones available right now, and if you like their Facebook page, you could win prizes (such as iTunes or Best Buy gift cards) on the way to 1000 likes, and after they top 1000, they'll hold a drawing to give away a new 6th-gen iPod Nano.

 

[mxpxrobbie]

Actually, I think I found a solution, thanks to a thread on the Android Central forums. Stealth Guards is apparently giving away all their screen protectors away for free for a limited time. You pay only the cost of shipping, which for me was $2.85, and the protector was originally $14.99. It's actually a full body protection skin, not just a basic screen protector. I'll probably just use the part for the back, and not mess with the front screen protector part at all. Here's the link:

http://www.stealthguards.com/index.php/cellphones/samsung-fascinate-full-body-protection.html

Note that they have free protector kits for most all the popular phones available right now, and if you like their Facebook page, you could win prizes (such as iTunes or Best Buy gift cards) on the way to 1000 likes, and after they top 1000, they'll hold a drawing to give away a new 6th-gen iPod Nano.

THANKS!!! Just ordered one for me and one for my girlfriend... I didn't want to add a case, but this will keep our phones looking fancy!

 

[illtema]

hey this looks really cool. can you let us know how this works out after you get it? i was just at the bar the other day (you know how when ur holdin a cold beer and ur hands get wet) i was like god this phone is slippery

 

[demo23019]

I got full body invisible shield.

I removed the SP and got realook because i didn't like the rubber feel on the screen.

But i left the back piece on it makes the back feel allot better and gives it a kind of rubbery feel and reduces finger prints and also helps protect from scratches

It and makes the over all phone feel solid.

 

[jselden]

Thanks for the link. Picked up 2 of these for my phone.

 

[Protonus]

Thanks for the link too, got one for me and two coworkers. Hell of a deal even if it's mostly crap. I just want it forthe back cover too. Way too slippery.

I'd like it if Seidio's innocase for this phone just protected the back/sides and left the front alone. I like the soft touch on those...

Even my HTC TP2 had a soft tough battery door stock.

 

[ivorycruncher]

Oh dang, I forgot to reply back to this. I got my Stealth Guard as expected (just an envelope in the mail, almost thought it was junk mail at first). Sadly, there NO instructions (except for a YouTube video on their website, which was a joke), but after digging up some info online, I washed and dried the battery cover, sprayed it with some slightly soapy water, and applied the skin. I rubbed out most of the bubbles fairly easily, and as others have said, after 2-3 days, all remaining bubbles and odd-looking film went away, and if not for the ridge at the edge of the skin, you wouldn't know it was on there. Oh, I did have a bit of trouble getting the corners to stick down to the curved corners of the battery cover, but I kept working on them, and they did eventually stick as the water started to dry up a little. So far there's no evidence of peeling or anything.

I do have to admit that it's not as grippy as I expected, but it is some better than the bare surface, and should prevent the back from getting scratched up, which I was starting to see evidence of, even with careful treatment of the device. I'm undecided if I'll ever apply the front piece or not at this point, but seeing how clearly the back piece applied, I wouldn't expect it to affect visibility at all.

I ordered another one of these for my brother-in-law's Droid Incredible, and would recommend them to anyone else as well, unless you want to try a different brand, in the hopes of getting an even grippier surface for the back side. But I think that for a mere $2.85, you really can't find a better deal anywhere.

Sent from my SCH-I500 using XDA App

 

[Protonus]

Well, I ordered the Verizon / OEM, "kickstand" hard case in hopes of a good solution for the slippery back. Looks like this case only covers the back and sides of the phone and leaves the front untouched which is what I wanted as far as a case, and it looks quite thin too. Plus, it has a kickstand built in which I really wanted since my TP2 had a sliding/tilting screen. The back of this case is grooved with like a patchwork pattern so I'm sure it's a lot grippier.

Verizon wants $20 for them, but I got it for $10 including shipping on eBay! I'll post back how it is when I get it, but I think it's the best solution i've seen.

 

[garywojdan81]

Have the kickstand case & it's pretty good. It also has 4 raised "feet" at the corners on the back which give it some speaker clearence when flat & act as friction points for your hand or loose pocket. The kickstand is a good alternative for a desk cradle & makes utilizing the alarm clock easier.

Sent from my SCH-I500 using XDA App

 

[ivorycruncher]

Bulky cases like that don't work for me. I use a belt holster case that I picked up from Best Buy, and any other protector case would make it bulky to put into the holster. That's why this stick-on protector was attractive to me, as it adds no unnecessary bulk. But that's just my preference. If you prefer a hard case, you'll get no argument from me.

Sent from my SCH-I500 using XDA App

 

[suzook]

I just ordered 3 brand new covers directly from VZ...They are only $3 bux each...Ill just replace them when needed.

 

[tcub]

I just ordered 3 brand new covers directly from VZ...They are only $3 bux each...Ill just replace them when needed.

I'd do that if they made some with a matte finish.. Where did you order them from? Just curious..

 

[suzook]

I'd do that if they made some with a matte finish.. Where did you order them from? Just curious..

Directly from the VZ site....I am gonna experiment with one...Im looking for a sort of rubber spray paint...If i can find one im gonna spray it.

 

[keith.mcintyre26]

Maybe with the white fascinate coming out at best buy I can buy the white back. Looks nice.

 

[Protonus]

Ok, got the OEM/Verizon Kickstand case in and the $2 Stealth Guards films. The kickstand case is THE solution for the battery door IMHO, but I got both mainly for this reason. Mini review of each:

The Kickstand case, I got from eBay, for $11 shipped w/ tax (just search for "fascinate kickstand"), which is half off the in store price you'll find. It is THE solution to the slippery battery door IMHO, and the best case out there right now. The case has a slight rubberized / soft touch finish, and has a grip pattern in it, which makes it much easier to hold onto. It's quite thin, except for a bump caused by the kickstand, which is leveled so the phone lays flat, by some "feet" on the back. That slight bump I actually like, because I can easily tell which way the phone is oriented in my hand without looking at it. It provides nice protection to the sides and corners and back, so I think it will provide added drop protection. It fits very tight, I wouldn't expect it to come off ever. What I really like, is that it barely protrudes above the front of the phone at all, it adds a very slight lip at the sides, and that's it. This keeps the phone quite flat/thin still and doesn't change how you'd interact with the screen at all. The slight lip should help protect the screen though. All the cutouts are excellent in positioning, and provide nice "cover" for the side buttons against accidental actuation.

Probably the nicest thing of all which I didn't expect, is that the Kickstand works in both Portrait with the phone vertical, and horizontal in landscape, due to the way they positioned the kickstand on the back. It works great - this takes care of one of the things I missed from my Touch Pro2 (the tilting screen). It also has a tensioner, which allows you to tweak the angle in horizontal/landscape a bit because it's "stiff". For the $11 I paid for it, it's worth every penny and seems quite solid/well engineered for the price.

Only downside I see is that it's a bit tougher to take the battery out of course..

The Stealth Guards films are better than nothing, but not much grippier than stock. They come with just two films, front and back. Application and clarity is similar to other "invisible shield" type products. Not a very good screen protector (orange peel, tiny bubbles, not crystal clear), Steinheil is WAY better, but they don't have them yet for our phones so I'll use this in the mean time. Also, they cover the light/prox sensor at the top of the phone, which I found made the automatic backlight adjustment sorta freak out and switch more often than it should (probably because the protector is relatively thick and not crystal clear) - I cut a tiny window out around them with a razor blade and that fixed the issue. They shipped in an envelope, inside another envelope, I ordered 3 sets for myself and friends, and every one came with wrinkling/damage. Fortunately the films are very durable so the films themselves were unharmed - it was the paper backing that was wrinkled. Still, they could of reinforced the envelope with a little cardboard.... Also they come with no instructions or packing at all, just bulk/oem packed. Still, for $2 they were worth it, but not worth much more than that.

 

[jbrdr985]

I just ordered 3 brand new covers directly from VZ...They are only $3 bux each...Ill just replace them when needed.

How did you get them for $3? It says they are $5.