solution to reduce the lag on your GT7.7

[UpInTheAir]

its safe if i use this on ur kernel UITA? v 3.3.0 JB

SkyHigh kernel for P6800 is built from official JB MD3 source, and because i don't have JB, I can only assume that it is OK and chips aren't affected.

There is a app by dev Chainfire to test and be sure.


[05.09.2012] Got Brickbug ? v1.2

http://forum.xda-developers.com/showthread.php?t=1693704



Sent from my GT-P6810 using xda premium

 

[Arobase40]

SkyHigh kernel for P6800 is built from official JB MD3 source, and because i don't have JB, I can only assume that it is OK and chips aren't affected.

There is a app by dev Chainfire to test and be sure.


[05.09.2012] Got Brickbug ? v1.2

http://forum.xda-developers.com/showthread.php?t=1693704



Sent from my GT-P6810 using xda premium

Tell me if I'm wrong but I think B4R7H's real question was : can he use lagfix (fstrim) with your Skyhigh new kernel version ???

 

[UpInTheAir]

Tell me if I'm wrong but I think B4R7H's real question was : can he use lagfix (fstrim) with your Skyhigh new kernel version ???

Please read my reply more carefully....

But you forgot the most important thing he was asking (or wanting to know), can he use it SAFELY ?

I said "'..... I assume that is it OK".....

Sent from my GT-P6810 using xda premium

 

[Arobase40]

Please read my reply more carefully....

But you forgot the most important thing he was asking (or wanting to know), can he use it SAFELY ?

I said "'..... I assume that is it OK".....

Sent from my GT-P6810 using xda premium

Sigh...

I didn't forget anything as I assumed your kernel is SAFE !

So let's try another time : can lagfix/fstrim be SAFELY used and is it compatible with your Skyhigh kernel ???

 

[UpInTheAir]

Sigh...

I didn't forget anything as I assumed your kernel is SAFE !

So let's try another time : can lagfix/fstrim be SAFELY used and is it compatible with your Skyhigh kernel ???

Please stop trolling.

1. I have already answered "I assume that is it OK"
2. Given reason behind my conclusion..... it's compiled from official JB source and only "assume" because I can't test and others with (some sort of) JB have confirmed the app working.
3. Given method to check if the kernel is indeed safe.
4. I mentioned I don't have JB, how am I supposed to know of its compatible with every app out there? :banghead:

Sent from my GT-I9500 using XDA Premium 4 mobile app

 

[B4R7H]

SkyHigh kernel for P6800 is built from official JB MD3 source, and because i don't have JB, I can only assume that it is OK and chips aren't affected.

There is a app by dev Chainfire to test and be sure.


[05.09.2012] Got Brickbug ? v1.2

http://forum.xda-developers.com/showthread.php?t=1693704



Sent from my GT-P6810 using xda premium

i forgot to put Does it*

Thanks UITA..i will try this but not today

 

[bassem.mohsen]

OK, just to confirm with every one, I use it with JB eRobot rom modified with multi window mod everyday.
and no complains so far, and it's totally safe.

 

[Arobase40]

OK, just to confirm with every one, I use it with JB eRobot rom modified with multi window mod everyday.
and no complains so far, and it's totally safe.

So with a stock kernel, right ???

 

[rezadentevil]

OK, just to confirm with every one, I use it with JB eRobot rom modified with multi window mod everyday.
and no complains so far, and it's totally safe.

so I'm using DXMD3 is it safe for me to use?

 

[bassem.mohsen]

so I'm using DXMD3 is it safe for me to use?

yes eRobot is using the same kernel of the original stock
so yes i'm on the stock kernel

 

[rezadentevil]

yes eRobot is using the same kernel of the original stock
so yes i'm on the stock kernel

mersi agha mohsen,
thanx bro, i didnt bricked, but i doesnt change any thing,

 

[Arobase40]

mersi agha mohsen,
thanx bro, i didnt bricked, but i doesnt change any thing,

Have you rebooted ??? ^^

Then, this may not be instantaneous... Wait awhile...

Read carefully the description BTW...

- "LagFix DOES NOT HANG! Trimming process might take many minutes! Like five or ten. Don' panic, make some tea and wait."

- "It is also advised to reboot your device after the TRIM process so that kernel could reinitialize block data."

- How full your storage is ? etcetera...

I'll test it myself, but latter on...

 

[rezadentevil]

Have you rebooted ??? ^^

Then, this may not be instantaneous... Wait awhile...

Read carefully the description BTW...

- "LagFix DOES NOT HANG! Trimming process might take many minutes! Like five or ten. Don' panic, make some tea and wait."

- "It is also advised to reboot your device after the TRIM process so that kernel could reinitialize block data."

- How full your storage is ? etcetera...

I'll test it myself, but latter on...

i reboot my tab manually, its just take a few seconds, 2or 3,
my storage is about 3GB full and the rest is free about 10GB.

 

[Arobase40]

i reboot my tab manually, its just take a few seconds, 2or 3,
my storage is about 3GB full and the rest is free about 10GB.

Fine.

Then do another benchmark and if that's still doesn't change anything, then this tool is probably useless in term of performance but your internal "SSD" is maybe safer and will maybe protected on the long term... ^^

If you don't think it is or if you think it is useless, just uninstall it then...

 

[rezadentevil]

Fine.

Then do another benchmark and if that's still doesn't change anything, then this tool is probably useless in term of performance but your internal "SSD" is maybe safer and will maybe protected on the long term... ^^

If you don't think it is or if you think it is useless, just uninstall it then...

yes your right i have to unistall it, i just saw the write speed, it was 13.28mb and now it's 13.mb,
its useless,

but thanx a lot bro

 

[bassem.mohsen]

yes your right i have to unistall it, i just saw the write speed, it was 13.28mb and now it's 13.mb,
its useless,

but thanx a lot bro

The app isn't useless, the trim bug is somthing acknowledged by Google Android and fixed in version 4.3.
the benchmarks are in the link in OP shows the memory related IO operations are enhanced.

and finally you don't have to reboot after using the application, this is just for old devices.

watch this video, it's very educative actually.

 

[rezadentevil]

The app isn't useless, the trim bug is somthing acknowledged by Google Android and fixed in version 4.3.
the benchmarks are in the link in OP shows the memory related IO operations are enhanced.

and finally you don't have to reboot after using the application, this is just for old devices.

watch this video, it's very educative actually.

look at firest use if this app for me for system, data, cache, it said system was trimmed and for three of them,
even i have the premijm version of this app,

 

[bassem.mohsen]

look at firest use if this app for me for system, data, cache, it said system was trimmed and for three of them,
even i have the premijm version of this app,

so, all good for you, do you feel the tablet more snappier than before?

and we need someone to benchmark his tablet before first time to use and after first time to use.
via Standard Quadrant benchmark

Currently I score about 4600 after using it, can anyone else benchmark his tablet before using it?

 

[konsolen]

I trimm one time per day and nothing bricked. If i dont trimm for 2 weeks, i see it first on keyboard when writing.
. Type a button, then it takes a little bit before it accept the type on the screen.

 

[UpInTheAir]

I trimm one time per day and nothing bricked. If i dont trimm for 2 weeks, i see it first on keyboard when writing.
. Type a button, then it takes a little bit before it accept the type on the screen.

Which kernel?

Sent from my GT-I9500 using XDA Premium 4 mobile app