Solved: Bluetooth volume defaults to maximum on each new connection

kutluch

Member
Sep 15, 2006
10
13
0
I have found that each time that I connect my bluetooth audio devices to the phone the volume resets to the loudest setting. The change seems to happen as soon as I start audio the first time after connecting. When I adjust the volume I can see momentarily that it was on a lower setting and then it jumps all the way up to maximum. This has happened with three different brands of headsets. It does not happen with wired earbuds. An app called "Bluetooth Volume Control" will automatically adjust the volume based on the bluetooth device connected. This work reasonably well but not 100% so far. Any thoughts or suggestions are appreciated.

Edit: I found a solution for this. In the developer options under the "Networking" heading, there is an option to "Disable absolute volume." Turning this option on allows the volume to stay where I put it.
 
Last edited:

ArkAngel06

Senior Member
Jun 18, 2010
523
231
0
Well, I love having mine maxed out every time. I had the Nexus6p which did something much more annoying. It would always set the Bluetooth volume to the middle and then I would have to turn it all the way up every time. I set up a Tasker option, but like your app, it didn't work 100% of the time either.
 

kutluch

Member
Sep 15, 2006
10
13
0
Well, I love having mine maxed out every time. I had the Nexus6p which did something much more annoying. It would always set the Bluetooth volume to the middle and then I would have to turn it all the way up every time. I set up a Tasker option, but like your app, it didn't work 100% of the time either.
In the past it would have been less of an issue but the combination of the new phone and my newest bluetooth set means that half way is ear damaging. My older sets were less so but are still uncomfortably loud.
 

Joecascio2000

Senior Member
Nov 12, 2010
1,900
465
0
www.facebook.com
My god, I hope no one else complains about this. I can't stand devices that default to a safe volume limit. FYI, when connected via BT, the phone volume is software based and what ever device you are using is hardware based. It is ALWAYS recommended to max out the software volume and then use the hardware (actual device) volume to adjust to your preference. On other phones I would always have to readjust both volumes, not fun. OnePlus does it right.
 

kutluch

Member
Sep 15, 2006
10
13
0
My god, I hope no one else complains about this. I can't stand devices that default to a safe volume limit. FYI, when connected via BT, the phone volume is software based and what ever device you are using is hardware based. It is ALWAYS recommended to max out the software volume and then use the hardware (actual device) volume to adjust to your preference. On other phones I would always have to readjust both volumes, not fun. OnePlus does it right.
Not all bluetooth earbuds have volume controls. It would be nice to just have the volume stay where I put it. That would be the "right" way. you could leave it high I could leave it lower.
 

kutluch

Member
Sep 15, 2006
10
13
0
So I found this. https://play.google.com/store/apps/details?id=com.phascinate.precisevolume&hl=en
It allows granular control over volume, presets for different devices, boosting or reducing the overall volume... etc.
For example, in my car maximum volume is preferred because I would rather use the volume control on the dash, however my wireless earbuds have no volume control and this newest pair have a truly ridiculously loud maximum volume, and I want them to default to about 50 percent. This app lets me set up separate presets for each.
It also lets you adjust the maximum volume and the rate of change when you use the volume controls. This was useful also.
free to use with ads but it is $2.99 to make it useful though.

I think that is problem solved but I wish that I didn't need an app to prevent an automatic volume change. It isn't about loud or soft. It is the fact that I put it where I want it and the phone changes it. In my case these headphones are capable of such loud volumes that starting soft would be preferable.
Here are the headphones by the way. A bit expensive but very worth it.
http://www.bestbuy.com/site/jam-tra...-ear-headphones-black/5796033.p?skuId=5796033

as a point of comparison I have also had these
https://www.amazon.com/SoundPEATS-B...TF8&qid=1501000430&sr=1-7&keywords=soundpeats

and these
https://www.amazon.com/LG-Electronics-HBS-760-Bluetooth-Wireless/dp/B00WE1QYX0/ref=dp_ob_title_wld

The Jams are way better than both in every respect.
 

megagab

New member
Mar 30, 2015
1
0
0
Finally found a real solution. In the developer options, under the "Networking" section, there is an option to "Disable absolute volume." turning this option on allows the volume to stay where I put it.
Thank you,I have been searching for a solution months!
I was getting affraid to use my headphones... :crying:
 

repelencius

New member
Jul 7, 2016
2
1
0
Finally found a real solution. In the developer options, under the "Networking" section, there is an option to "Disable absolute volume." turning this option on allows the volume to stay where I put it.
Thanks for the solution! I've been having the opposite problem, i. e. every time I connected my Bluetooth earplugs the volume was always at the minimum. Now it's working fine.
 
  • Like
Reactions: GuestX00320

GuestX00320

Member
Jan 4, 2017
44
9
0
Salt Lake City
Finally found a real solution. In the developer options, under the "Networking" section, there is an option to "Disable absolute volume." turning this option on allows the volume to stay where I put it.
I noticed this and had it on but I turned it off, then I noticed that the volume was not staying like it did when I used other bluetooth earbuds. After reading your post, I then reenabled the option and works nicely. I got the IdeaUSA v203 headphones today, and I was trying to keep the volume about the same via bluetooth and aux cable, in-case I ran out of battery and need to plug in aux to use headphones. This works perfectly for me. I use Poweramp and nicely done for this. It says up to 40 hours playback but I think with the way I got it might give me a few hours less playback but I am willing to sacrifice for volume. One reason I love Oreo or higher OS now. My S7 Edge is nice with this.:good:
 

littlemermaid1

New member
Oct 28, 2019
1
0
0
I have 'disable absolute volume' ON and i still have this problem. Its a very big problem, because having music defaulted to large scares the me so much and also is causing damage to my ears.
 

scirio

Senior Member
Nov 8, 2007
481
41
0
I have 'disable absolute volume' ON and i still have this problem. Its a very big problem, because having music defaulted to large scares the me so much and also is causing damage to my ears.
Same here. Toggling that did nothing at all.

My issue was that if I took a phone call while any media was playing, when I hung up on the call the media volume would jump to max and playback would resume which DESTROYED my ears.

My solution was to uninstall the Samsung Sound Assistant app and then rebooting my S9. (Because the behavior persisted until rebooted after the uninstall.) That fixed the issue entirely. I miss the functionality of Sound Assistant so I might try reinstalling to see if it works itself out but for now having the problem fixed is very nice.