SOLVED for some HUAWEI Y6 types : How to root this device ?

michalss

Member
Jul 31, 2011
23
0
0
Sorry to hear about that. I did not change it to Superuser. Perhaps that is the reason. Original ROM is available. If you can wait till tomorrow i can sent you the necessary things.
Uff thank you my hero :) Ill wait.. thx again, i will recover it and try many other things to make sure all is good after rooting, it seems that this model is 1 big mistery...
 

raystef66

Recognized Developer / Recognized Contributor
Jul 2, 2013
2,081
5,265
203
You could perform a factory reset in adb. Did you try this? In Adb recovery, do a factory reset. Not sure if that will work nor if it is safe to perform richt now. I will see in to it tomorrow.
 

michalss

Member
Jul 31, 2011
23
0
0
You could perform a factory reset in adb. Did you try this? In Adb recovery, do a factory reset. Not sure if that will work nor if it is safe to perform richt now. I will see in to it tomorrow.
Try everything i could, i guess that su broke boot partition data somehow... ROm from your phone will work if is your device OK...
 
Last edited:

[email protected]

New member
Dec 3, 2015
2
1
0
King Root

And what happens when you reboot? Is the root permanent?
Is not... All you have to do is to remove the root permission by going into settings and deactivate it. After I did that I was no longer able to perform the same things (like rename, copy, paste, set permissions.)
I just rooted my Huawei Y6 and removed all the bloatware and reverted the boot animation back to the default Huawei.
Thanks a lot for your post raystef66.
 
Last edited:
  • Like
Reactions: raystef66

raystef66

Recognized Developer / Recognized Contributor
Jul 2, 2013
2,081
5,265
203
Is not... All you have to do is to remove the root permission by going into settings and deactivate it. After I did that I was no longer able to perform the same things (like rename, copy, paste, set permissions.)
I just rooted my Huawei Y6 and removed all the bloatware and reverted the boot animation back to the default Huawei.
Thanks a lot for your post raystef66.
Root is indeed not permanent. Perhaps i did not explain it that good. When you reboot when rooted, it will be rooted as before.
But as you mentioned correctly, one can always remove root permissions and deactivate it.
Even removing Kingroot is possible but not recommendable...why should we :D

By the way : do you have the 1gb/1sim ? Did you replace Superuser as well ? Was your bootanimation changed after root ?
 
Last edited:

michalss

Member
Jul 31, 2011
23
0
0
Root is indeed not permanent. Perhaps i did not explain it that good. When you reboot when rooted, it will be rootedas before.
But as you mentioned correctly, one can always remove root permissions and deactivate it.
Even removing Kingroot is possible but not recommendable...why should we :D

By the way : do you have the 1gb/1sim ? Did you replace Superuser as well ? Was your bootanimation changed after root ?
Can you please send me this images i asked for, or anyone who can do it ? I was looking many hours for some ROM for this phone, no luck at all :(
 

raystef66

Recognized Developer / Recognized Contributor
Jul 2, 2013
2,081
5,265
203
Can you please send me this images i asked for, or anyone who can do it ? I was looking many hours for some ROM for this phone, no luck at all :(
Can you go into recovery mode with adb ? Did you try that ?
There you can perform a factory reset.
Steps : get ADB minimal tool - run this tool - in cmd just check adb devices (just to check if you are connected)
Then type " adb reboot recovery". This will bring you to the picture included. There perform a factory reset.
Don't know if this helps. But worth a try (@ your own risk)
If this won't help we search further.
 

michalss

Member
Jul 31, 2011
23
0
0
Can you go into recovery mode with adb ? Did you try that ?
There you can perform a factory reset.
Steps : get ADB minimal tool - run this tool - in cmd just check adb devices (just to check if you are connected)
Then type " adb reboot recovery". This will bring you to the picture included. There perform a factory reset.
Don't know if this helps. But worth a try (@ your own risk)
If this won't help we search further.
Try this already, try everything only fastboot is available, nothing else and to use it need working imgs from working phone, what i dont have :(
 

michalss

Member
Jul 31, 2011
23
0
0
Can you perform the "adb devices" and see your device on the screen?
No i cannot, all i can use is fastboot. Normal adb is not working of course, mention that a few times. ADB is activated only after boot sequence.

Code:
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
Code:
52e775e4        fastboot
 
Last edited:

raystef66

Recognized Developer / Recognized Contributor
Jul 2, 2013
2,081
5,265
203
No i cannot, all i can use is fastboot. Normal adb is not working of course, mention that a few times. ADB is activated only after boot sequence.

Code:
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
Code:
52e775e4        fastboot
Just checking : is ADB interface correctly installed ? (ADB drivers) - you should see your phone in device manager with ADB interface. If not i think ADB drivers are not installed correctly. I could be wrong but just checking if you installed them correctly.
 
  • Like
Reactions: Tiedemate

michalss

Member
Jul 31, 2011
23
0
0
Just checking : is ADB interface correctly installed ? (ADB drivers) - you should see your phone in device manager with ADB interface. If not i think ADB drivers are not installed correctly. I could be wrong but just checking if you installed them correctly.
Mate, adb driver is correcty installed, try different phone and it worked, also before brick i have seen my phone listed, not it is not possible, coz boot sequence never starts... That the whole reason i need images, at least for start boot.img and manager.img
 
Last edited:

raystef66

Recognized Developer / Recognized Contributor
Jul 2, 2013
2,081
5,265
203
Mate, adb driver is correct installed, try different phone, also before brick i have seen my phone listed, not it is not possible, coz boot sequence never starts... That the whole reason i need images, at least for start boot.img and manager.img
No worries mate ;). Just want to check everything.
I will see to get some files and help you further on this one.
 

raystef66

Recognized Developer / Recognized Contributor
Jul 2, 2013
2,081
5,265
203
Thx a lot much appreciated.. :)
Tried to pull boot.img from phone without any luck. Used ADB shell - su - cat proc/mtd
Nothing listed there so nothing to pull.
Any other suggestions to pull boot.img without adb ?
ps : not much time for now, so i did not go into it very deep. So when you have other means, feel free to share.
 

michalss

Member
Jul 31, 2011
23
0
0
Tried to pull boot.img from phone without any luck. Used ADB shell - su - cat proc/mtd
Nothing listed there so nothing to pull.
Any other suggestions to pull boot.img without adb ?
ps : not much time for now, so i did not go into it very deep. So when you have other means, feel free to share.
Simple do backup with nandroid, thats all, no need anything else. With adb you cannot do full img backup. Only a few tools can do it and most simple is NANDROID directly from phone or i gues SP Flash Tool Can do it or Mtk_Droid_Tool also can do it. I would first try nandroid..
 
Last edited:

raystef66

Recognized Developer / Recognized Contributor
Jul 2, 2013
2,081
5,265
203
Simple do backup with nandroid, thats all, no need anything else. With adb you cannot do full img backup. Only a few tools can do it and most simple is NANDROID directly from phone or i gues SP Flash Tool Can do it or Mtk_Droid_Tool also can do it. I would first try nandroid..
Managed to dump the aboot.img with ADB partitions
Flash this file and try :good:
 

Attachments

Last edited:

michalss

Member
Jul 31, 2011
23
0
0
Managed to dump the aboot.img with ADB partitions
Flash this file and try :good:
damn have a problem i have Lock FRP..

Code:
sending 'boot' (5056 KB)...
OKAY [  0.168s]
writing 'boot'...
FAILED (remote: Necessary to unlock FRP! Navigate to Settings > Dev
finished. total time: 0.180s
 

raystef66

Recognized Developer / Recognized Contributor
Jul 2, 2013
2,081
5,265
203
damn have a problem i have Lock FRP..

Code:
sending 'boot' (5056 KB)...
OKAY [  0.168s]
writing 'boot'...
FAILED (remote: Necessary to unlock FRP! Navigate to Settings > Dev
finished. total time: 0.180s
Use the other one for now.
 
Last edited: