Question [Solved] Narzo 30A stuck in bootloop, no access to Recovery/Fastboot

Search This thread

mouradsme

Member
May 22, 2014
35
2
27
Relizane
pc-dz.com
Realme Narzo 30A
I had just unlocked my phone's bootloader, installed a custom recovery based on TWRP, and a custom ROM (PixelExperience).
I was using the phone just fine until I restarted it into recovery,
ever since, it's been rebooting none stop
But now I have no way to access my recovery/adb/fastboot
I can only put in Download Mode
I tried flashing via Download Mode using SP Flash Tool, but I have been receiving STATUS_BROM_CM_SEND_DA_FAIL error.
Is there any way to fix it?
 

mouradsme

Member
May 22, 2014
35
2
27
Relizane
pc-dz.com
Realme Narzo 30A
After trying every tool out there + potentially having infected my pc with some virus (Hopefully that's solved too), I managed to bring my Narzo 30A to life.
To anyone facing this problem : your best bet would be an after-sales services,
Otherwise, if you're as desperate as I was (This really is a last resort option, since it could totally brick the phone as far as I know), here's what I did:
> I downloaded & installed
* All required drivers MTK drivers, VCOM...
* SP Flash Tool (spflashtool.com),
* mtk_bypass_rev4 from MobileGuru4.com
* The official ROM (.OZIP format) - I could access it using Winrar
* PBRP recovery (Based on TWRP)

> I then extracted in a folder (let's call it "C:/Flash/"):
* recovery.img from PBRP
* preloader_emmc.img, boot.img & vbmeta.img from the Stock ROM

> I looked for the appropriate Scatter + .AUTH + MT6768.DA files for my device and found them on the net

> I opened SP Flash tool,
* Used the MT6768.DA, scatter and auth files I downloaded
* Ticked only preloader, recovery, vbmeta & boot and associated each one to its relevant .img file (that I previously extracted)

* I entered into EDL mode
* I opened mtk_bypass_rev4
* Chose my MT model (mine's MT6768)
* Clicked on Bypass
* Once it said the bypass succeeded, I clicked on Download on SP flash tool
* Waited till it finished flashing
* After rebooting, my bootloader + recovery were restored
 
  • Like
Reactions: Shubham 786

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    After trying every tool out there + potentially having infected my pc with some virus (Hopefully that's solved too), I managed to bring my Narzo 30A to life.
    To anyone facing this problem : your best bet would be an after-sales services,
    Otherwise, if you're as desperate as I was (This really is a last resort option, since it could totally brick the phone as far as I know), here's what I did:
    > I downloaded & installed
    * All required drivers MTK drivers, VCOM...
    * SP Flash Tool (spflashtool.com),
    * mtk_bypass_rev4 from MobileGuru4.com
    * The official ROM (.OZIP format) - I could access it using Winrar
    * PBRP recovery (Based on TWRP)

    > I then extracted in a folder (let's call it "C:/Flash/"):
    * recovery.img from PBRP
    * preloader_emmc.img, boot.img & vbmeta.img from the Stock ROM

    > I looked for the appropriate Scatter + .AUTH + MT6768.DA files for my device and found them on the net

    > I opened SP Flash tool,
    * Used the MT6768.DA, scatter and auth files I downloaded
    * Ticked only preloader, recovery, vbmeta & boot and associated each one to its relevant .img file (that I previously extracted)

    * I entered into EDL mode
    * I opened mtk_bypass_rev4
    * Chose my MT model (mine's MT6768)
    * Clicked on Bypass
    * Once it said the bypass succeeded, I clicked on Download on SP flash tool
    * Waited till it finished flashing
    * After rebooting, my bootloader + recovery were restored