[Sony Ericsson Music] Flashable Zip

[rachanta]

This thread is for sharing my latest flashable Sony Ericsson Music app.
Sony Ericsson Music Player

 

[rachanta]

My Viper4Android - Using Convolver

What I do to get Viper running and set to my liking:
Install the ViperEnforcingSurroundSu.zip - Boot
Start my walkman player
Settings/ Sound Enhancement/Viper/UI Settings/Expert
See images for my Viper and Faux Sound settings

Convolver - Impulse Response Samples
Copy this zip to SDCard and Extract
Now the the IRS samples *.irs files should be visible in Impulse Response drop down in viper settings. If that doesn't work do the following:
Either manually of through terminal
adb shell
su
cp /sdcard/ViPER4Android/Kernel/*.irs /storage/emulated/0/ViPER4Android/Kernel/
or
/storage/emulated/legacy/ViPER4Android/Kernel/

If you still cant see the irs files when you select Impulse Response, Check Viper app information and confirm that permissions have been granted to Storage.

 

[rachanta]

My Music Player

Here's my favourite player. I bought poweramp but run it only when for some reason the combination of the latest stable sony ericsson music + viper4android fails:

Download Link

 

[Matthew_333]

Thanks for that Is it the material design version?

 

[rachanta]

Thanks for that Is it the material design version?

Not sure V 2.3.4.0 viper4android_v2

 

[fendytrancers89]

Only for CM13.0 sir?

 

[AndresOrue]

Thank you

Don't hate what you don't understand

 

[aashgaur]

will it remove audio fx from cm13 caf ?
edit: will it work with permissive ?

 

[stani2103]

Viper 2.3.4.0 still working for mi on MM

®®®TAPATALKING®®®

 

[rachanta]

Not working with official cm-13.0-caf

I had tested with temasek caf being run in enforcing mode.
Edit
I just discovered that it doesn't work with official CM-13.0-CAF without Super Su 2.66 installed.
It needs Super Su 2.66 to work

 

[rachanta]

Viper 2.3.4.0 still working for mi on MM

®®®TAPATALKING®®®

There are many versions. I was using Yash98's version for enforcing surround, and it didnt work after Jan 1 security update mmb29s. I am not too sure if what I have done is robust enough.

 

[rachanta]

Only for CM13.0 sir?

Havent tested on cm-13.0. May not work.

 

[rachanta]

will it remove audio fx from cm13 caf ?
edit: will it work with permissive ?

Yes it will remove audiofx. I havent tested it on permissive, but there is no problem with Viper in permissive mode anyway and you dont need this.
After testing on latest cm-13.0-caf where it didnt work, I am not sure if it will work with cm-13.0.
Edit: It works with CM-13.0-CAF with Super Su 2.66 installed

 

[rachanta]

Alert

Sorry, after testing with latest CM-13.0-CAF, I find that this mod does not do what it is supposed to do. It works CM 13.0-CAF only with Super Su 2.66 installed. I need to check further with CM-13.0.

 

[01 Vlatce]

Super Su 2.66 is mandatory on MMB29S or it can work with the good old 2.52? Because I already have that version. 2.66 was buggy with bootloop.

 

[rachanta]

Super Su 2.66 is mandatory on MMB29S or it can work with the good old 2.52? Because I already have that version. 2.66 was buggy with bootloop.

You need to try, I am not going back to Su 2.52. First try without Super Su. Then 2.52 and finally 2.66. There is no problem with Su 2.66, and it is supposed to boot loop once or twice on first boot. After that it works perfectly. Google and CM and both constantly increasing security levels, and it is better to keep pace.

 

[rachanta]

Viper and Convolver - my settings

A member of RACER Nexus 5 Community @G+ asked for my settings. This post shows:
http://forum.xda-developers.com/showpost.php?p=64721479&postcount=2

Edit:
ViperEnforcingSurroundSu.zip is working very well with AICP hammerheadcaf without Super Su 2.66. Probably this ROM provides internal links to MusicFX (which Viper replaces)

Edit: My Music Player
http://forum.xda-developers.com/showpost.php?p=64721487&postcount=3

 

[01 Vlatce]

You need to try, I am not going back to Su 2.52. First try without Super Su. Then 2.52 and finally 2.66. There is no problem with Su 2.66, and it is supposed to boot loop once or twice on first boot. After that it works perfectly. Google and CM and both constantly increasing security levels, and it is better to keep pace.

Confirmed, works fine Cataclysm OS SuperSu 2.52

Sent from my Nexus 5

 

[toocool4all]

Why the official viper has stopped working on new updates ? Last version is of january 2015.

Sent from my Nexus 5 using XDA Free mobile app

 

[rachanta]

Why the official viper has stopped working on new updates ? Last version is of january 2015.

Sent from my Nexus 5 using XDA Free mobile app

@toocool4all
I use the latest official Viper apk, but make changes to how su policy is handled to make it work. Google is tightening security with every update, so it may be difficult to keep pace and make root applications work as we go forward.