Sony Smartwatch doesn't work on Galaxy S4 i9505

Misterskulls

Member
Mar 6, 2012
11
1
0
Arezzo
My Sony Smartwatch doesn't work on my GALAXY S4, what can I do to connect the Smartwatch with the smartphone? My Galaxy S4 is a GT-i9505

Sent from my GT-I9505 using xda premium
 

Misterskulls

Member
Mar 6, 2012
11
1
0
Arezzo
Yes, I downloaded everything but when I go to activate the Bluetooth and to connect the devices the galaxy don't read my watch. In practice the smartphone don't detect it :(

Sent from my GT-I9505 using xda premium
 

jongilluley

Senior Member
Mar 19, 2008
255
53
0
Of course.. Thanks problem is when I activate Bluetooth and I try to connect the watch..

Sent from my GT-I9505 using xda premium
Im using omega v6 rom on my i9505 and my smart watch connected first time and hasnt disconnected once yet so im stumped for u....

Have u set ur s4 to discoverable?

Oh an dont try to connect through settings... go through the smart app and add device from there.

Sent from my GT-I9505 using xda premium
 

Misterskulls

Member
Mar 6, 2012
11
1
0
Arezzo
I do everything, I'm using a parting of Galaxy s4 google Edition rom, but I tried also when I used omega roms or foxholes roms.. So I don't know what i can do to connect my watch :(

Sent from my GT-I9505 using xda premium
 

NapalmDawn

Senior Member
Sep 3, 2010
1,002
169
0
Raleigh
I do everything, I'm using a parting of Galaxy s4 google Edition rom, but I tried also when I used omega roms or foxholes roms.. So I don't know what i can do to connect my watch :(

Sent from my GT-I9505 using xda premium
Here's some steps you can take especially if your watch is new and not very customized yet. Try hooking up the watch to your PC and run the sony applicaton on your PC that does the updating. Have it connect to your watch and flash the latest firmware from Sony. After it's all done, let the watch sit on the cable until it has a full charge. When it is fully charged, reboot your phone and disconnect the watch from the cable. After the reboot, make sure no other BT devices are connected. Put the phone in BT discovery mode. Hold the watch's power button down for about 30 seconds or so. This will reset the watch. From there, the pairing should work.
 
  • Like
Reactions: bitstorm1978

NapalmDawn

Senior Member
Sep 3, 2010
1,002
169
0
Raleigh
I see an new issue... The LiveView app closes itself after some time... Someone experiencing this issue too?



Sent from my GT-I9505 using xda premium
If I cut BT off , yes the app will disappear. However if BT is fine and my phone has been within range of the watch, I never see the app go away. Double check any app killers you have to make sure it's whitelisted. Also, people at least with a Nexus 4 have been complaining that the BT stack for 4.2.2 has been kind of trashy. M y rooted Rezound with a 4.2.2 rom has been fine though.
 

matslin

New member
Aug 3, 2013
1
0
0
can't connect smartwatch with S4

I try to reset the watch and pairing again with my S4, it paired up, when connecting for data, my phone just won't find my watch. I don't know how to update my watch with pc. But I connect it with my galaxy tab and update it. Is there any other way that can make my watch works with S4?

Thanks a lot
 

halflite

New member
Jan 17, 2005
2
1
0
Glad I could help. When I snagged mine off Ebay, it was stuck on a 3 bars screen. I had to do some searching around to get it fixed. That's where I came across a lot of the troubleshooting steps for the watch.
Same situation here, and to echo the above comments, your advice sorted it brilliantly!! [sp?]

Cheers!
 
  • Like
Reactions: NapalmDawn

NapalmDawn

Senior Member
Sep 3, 2010
1,002
169
0
Raleigh
Same situation here, and to echo the above comments, your advice sorted it brilliantly!! [sp?]

Cheers!
Awesome :) It takes a bit of googling to find the right info on that. I initially told my seller-thanks for a defective watch LOL. It's been working great since I fixed that thing being stuck on the 3 bars.