Sony Tablet S Bricket after FLASHER 3.0

[adaptertoo]

Hi guys! Helpp!!

- I root my tablet with AIO
- I use FLASHER 3.0 to flash the new rom

While FLASHER was asking what to do (flash hiden,img whatever) the tablet showed few errors and reboot, after that the tablet stucks on a loop of sony logo, i made few resets from recovery mode

- The tablet was reset at this stage (I did not choose any option)



I tried to flash a billion roms, none worked, some of the roms i tried:

signed-nbx03_016-ota-0042.004
signed-nbx03_001-ota-120803002
signed-nbx03_001-ota-120914044
signed-nbx03_001-ota-121116036
signed-nbx03_001-ota-0042.001
_hack_recovery


- The region has switch to US

- adb is working fine pulling the log but adb shell shows always " tablet showed "

- I tried FLASHER again, it's stuck on " Waiting for device..."

Recovery log

W:failed to mount /dev/block/mmcblk1p1 (No such file or directory); trying /dev/block/mmcblk1
W:failed to mount /dev/block/mmcblk1p1 (No such file or directory); trying /dev/block/mmcblk1

-- Install /sdcard ...
Finding update package...
I:Update location: /sdcard/signed-nbx03_016-ota-0042.004.zip
Desklunvr update package...
Opening update package...
I:1 key(s) loaded from /res/keys
Verifying update package...
I:comment is 1465 bytes; signature 1447 bytes from end
I:whole-file signature verified against key 0
I:verify_file returned 0
Fail to symlink /datapp/vendor/vendor0 to /tmp/prev_vendor: File exists
E:Prohibit update as a result of checking version or base sku
Installation aborted.

 

[adaptertoo]

Ok a bit more of light , i think i learn what it's the problem (but not the solution)

The tablet has the last rom installed (4.0.3 5ra) so if i try to install the last i can get for the region i get the incremental error because both are the same version

prev version[121116046] is larger than post version[121116046]

If i try to install two in a row i get the vendor error bcoz the second partition is damaged or whatever


So at this point I can think of the following solutions (which are probably not possible)

- A way to change the region with not adb shell / root
- A way to change incremental / SKU value with not adb shell / root
- A way to change the incremental / SKU of the rom before flash it

so Is it possible to do any of them?

 

[pafmdsilva]

Hello! I am having the same exact problem.let me know if you find a solutiom.if i do i will post it.have you tried flash with honey comb ?i can find a portugal one but that one seams to be have no problems with vendor ****

Sent from my ALCATEL ONE TOUCH 997D using XDA Free mobile app