Sony Xperia Z Screen Repair Guide

[vStr0ng3r]

weird cable

Do you know what is the most-right-sided cable highlighted in green doing (2.2)? I have recently took it from service, it seems to be that they did something, but the phone still doesnt work. In my phone its unplugged.
i.imgur.com/dz0f9Mm.jpg

 

[0ViP0]

Hello everyone

It's been a while since I have had a problem with a device that I repair but unfortunately it has happened again today.

Yesterdat at 5 pm a friend of mine came by with his xperia z to replace the screen. I first run through the tutorial and see whether I came across something I do not know. Then I just started the repair and took my time to complete it. I finished at 19:30 pm. I also installed a new parts I've replaced the display and the on / off volume flex cable. After having successfully placed everything the most exciting moment of the evening followed, turning on the device. The 1st time I turned on the phone it worked so well. I did some tests and turned the phone a few times on and off to see if that would not cause any problems. But after 4 times the phone only showed the backlight. I have been through all the connections and also did an disassembly again to see if there might be a flex cable that is not properly connected but I could not find anything.

Now my question to you is fellow members, would anyone here help me or has anyone here had previously experienced.

With kind regards,

0ViP0

 

[fdezdyo]

I have purchased 4 lcds for my Sony Xperia Z

I have tried without mounting, just connecting the LCD to the plate but does not work either.

Should work well? It takes more?

a greeting

 

[beejay77]

screen flickering

Hi,
i opsted in different thread, but not received the answer.
I got some flickering after replacement of screen in Z1 like on photos in this post:
http://forum.xda-developers.com/xpe...ially-flickering-fixing-t2774015#post58725982

In my case, when phone is working longer I have more flickering, up to the moment when i can not see anything. The back side of phone is getting warm (around NFC logo). Also i got more flickering when on screen are pictures, icons with high resolution. Simple text are almost always clear.

Is it possible, that other thing than lcd cable is the problem?
My doubt is warming of the phone and that i got more flickering with time.

Also supplier wrote to me , that they check every single part before sending. I can not notice any visual signs of damage.

 

[stemilano]

After replacement of display, the adhesive is detaching in one part of display. It is safe (and feasible) to detach display without cracking and reattach it?
I suspect that or adhesive included in the replacement display wasn't really strong....but also, why adhesive is only around borders and not also in the middle, at least partially?
Is there any other trick or glue i can use?

Thanks

 

[bacardi251]

Problem screen

Hello
Hello, I have a problem with my mobile phone , I replaced the screen and motherboard , can you help me? thank you

 

[Sovjet]

Thanks this guid is/was really usefull for a friend of my

 

[lenteenes]

I have purchased 4 lcds for my Sony Xperia Z

I have tried without mounting, just connecting the LCD to the plate but does not work either.

Should work well? It takes more?

a greeting

Look this guide
http://www.hcqs.cc/industry-news/industry-news-289.html
Hope it helps

 

[Bella Mujere]

black to white

Hi, is it possible to replcae an xperia Z black frame with a white one ? or the replacement part must have the same color to fit ?

 

[Akinaro]

Hi, is it possible to replcae an xperia Z black frame with a white one ? or the replacement part must have the same color to fit ?

Whole frame is one part where screen and motherboard are attached. Its possible but its hard and costly, and taking in to the account that you can buy now new Xperia Z for less than 180Euro(last time I checked in one of bigger media shops) its just not worth time and money.

But you can replace back glass and all flaps with those plastic bars that are around phone without to much problem(utility knife+ few minutes) they are made from plastic and you can buy them for about 30-35Euro(back glass+flaps+bars) from aliexpress. I ordered them two times and quality is good, almost like original.
OR
You could paint that frame, but its need time and some experience to make it good.

 

[Naif_Vox]

Replaced battery and display got damaged

HI, I replaced battery of my Xperia Z and now the display is just grey (only back light) The phone is working I know because it gets notification but the screen is only grey. Which part did I damage while replacing the battery? PLease help

 

[Kaxik]

Does the digitizer cover the entire front glass or only the translucent section?