[sound mod] V3 - Stereo Speakers!

Rafe · Jan 10, 2016

SOUND MOD STEREO SPEAKERS - V3

Hello friends!

V3 is avaiable! I adjust the volume of the speaker to prevent crackling. Now working good with a new mod, the SoundMod V7!

Hit thanks to the creator! http://forum.xda-developers.com/z3/development/stereo-speakers-sound-mod-v3-2-z323-0-1-t3015912

Advice: do not use any other mod with SoundMod V7 Loud, just my mod Stereo V2 of course.

How to:

1 - Install my mod Stereo V3;

2 - Then flash the SoundMod V7 Loud;

3 - Edit the build.prop and make sure that the following lines are present:

af.resampler.quality = 4
media.aac_51_output_enabled = true
ro.semc.xloud.supported = true
persist.service.xloud.enable = 1
ro.somc.clearphase.supported = true
persist.service.clearphase.enable = 1
ro.somc.sforce.supported = true
persist.service.sforce.enable = 1

4 - Save, reboot and BOOM! Sound quality with stereo mod is amazing!

-------------------------------------------------------------------------------------------------------------------------------------------------------------

The process is simple , just replace the mixer_paths_mtp.xml file in the \ system \ etc .

Of course, back up your original file.

PLUS: This mod works beautifully with this Stereo MOD V2! Sounds great!
http://forum.xda-developers.com/android/software/mod-xperia-z5-premium-walkman-including-t3252123

Put the stereo mod v2 first, after flash mod Z5 premium!

Requirements :

- Rom STOCK .112 ( I have not tested on the latest , but it should work! you say, ok ? ) --> I think that will not work properly on non stock ROM, need test.

- Root

- File/root explorer

Replace , set permissions and boot .

Working flawless for me on my M4 E2306 .

HERE YOU CAN TEST THE STEREO SEPARATION ----> https://www.youtube.com/watch?v=6WKspXZfmEE

========> Sound mods from Cross Developer thread changes the structure and uses the Mixer_Paths.xml, not the Mixer_Paths_Mtp.xml. To work fine needs to be on stock.

Hit thanks if you like !

Cheers !

Attention: The zip is not flashable!

ardentis · Dec 22, 2015

Not working on my E2306 with 167. I get no sound after installing. What are the changes in your xml?
Edit: hold on I forgot to change permissions so let me see now

. Nope still not working for me even with 777 permissions

Rafe · Dec 22, 2015 at 12:42 AM

ardentis said:
Not working on my E2306 with 167. I get no sound after installing. What are the changes in your xml?
Edit: hold on I forgot to change permissions so let me see now

Thanks Bro!

Here are the changes:

<path name="speaker">
<ctl name="MI2S_RX Channels" value="Two" />
<ctl name="RX1 MIX1 INP1" value="RX1" />
<ctl name="RDAC2 MUX" value="RX1" />
<ctl name="HPHL" value="Switch" />
<ctl name="HPHR" value="Switch" />
<ctl name="RX3 MIX1 INP1" value="RX2" />
<ctl name="SPK DAC Switch" value="1" />
<ctl name="RX2 Digital Volume" value="88" />
<ctl name="RX1 Digital Volume" value="87" />
<ctl name="EAR PA Gain" value="POS_1P5_DB" />
<ctl name="EAR_S" value="Switch" />
</path>

<path name="speaker-ringtone">
<ctl name="MI2S_RX Channels" value="Two" />
<ctl name="RX1 MIX1 INP1" value="RX1" />
<ctl name="RDAC2 MUX" value="RX1" />
<ctl name="HPHL" value="Switch" />
<ctl name="HPHR" value="Switch" />
<ctl name="RX3 MIX1 INP1" value="RX2" />
<ctl name="SPK DAC Switch" value="1" />
<ctl name="RX2 Digital Volume" value="88" />
<ctl name="RX1 Digital Volume" value="87" />
<ctl name="EAR PA Gain" value="POS_1P5_DB" />
<ctl name="EAR_S" value="Switch" />
</path>

<path name="fm-speaker">
<ctl name="MI2S_RX Channels" value="Two" />
<ctl name="RX1 MIX1 INP1" value="RX1" />
<ctl name="RDAC2 MUX" value="RX1" />
<ctl name="HPHL" value="Switch" />
<ctl name="HPHR" value="Switch" />
<ctl name="RX3 MIX1 INP1" value="RX2" />
<ctl name="SPK DAC Switch" value="1" />
<ctl name="RX2 Digital Volume" value="88" />
<ctl name="RX1 Digital Volume" value="87" />
<ctl name="EAR PA Gain" value="POS_1P5_DB" />
<ctl name="EAR_S" value="Switch" />
</path>

ardentis · Dec 22, 2015 at 5:31 AM

Rafe said:
Thanks Bro!

Here are the changes:

<path name="speaker">
<ctl name="MI2S_RX Channels" value="Two" />
<ctl name="RX1 MIX1 INP1" value="RX1" />
<ctl name="RDAC2 MUX" value="RX1" />
<ctl name="HPHL" value="Switch" />
<ctl name="HPHR" value="Switch" />
<ctl name="RX3 MIX1 INP1" value="RX2" />
<ctl name="SPK DAC Switch" value="1" />
<ctl name="RX2 Digital Volume" value="88" />
<ctl name="RX1 Digital Volume" value="87" />
<ctl name="EAR PA Gain" value="POS_1P5_DB" />
<ctl name="EAR_S" value="Switch" />
</path>

<path name="speaker-ringtone">
<ctl name="MI2S_RX Channels" value="Two" />
<ctl name="RX1 MIX1 INP1" value="RX1" />
<ctl name="RDAC2 MUX" value="RX1" />
<ctl name="HPHL" value="Switch" />
<ctl name="HPHR" value="Switch" />
<ctl name="RX3 MIX1 INP1" value="RX2" />
<ctl name="SPK DAC Switch" value="1" />
<ctl name="RX2 Digital Volume" value="88" />
<ctl name="RX1 Digital Volume" value="87" />
<ctl name="EAR PA Gain" value="POS_1P5_DB" />
<ctl name="EAR_S" value="Switch" />
</path>

<path name="fm-speaker">
<ctl name="MI2S_RX Channels" value="Two" />
<ctl name="RX1 MIX1 INP1" value="RX1" />
<ctl name="RDAC2 MUX" value="RX1" />
<ctl name="HPHL" value="Switch" />
<ctl name="HPHR" value="Switch" />
<ctl name="RX3 MIX1 INP1" value="RX2" />
<ctl name="SPK DAC Switch" value="1" />
<ctl name="RX2 Digital Volume" value="88" />
<ctl name="RX1 Digital Volume" value="87" />
<ctl name="EAR PA Gain" value="POS_1P5_DB" />
<ctl name="EAR_S" value="Switch" />
</path>

If I give you my mixer_paths_mtp.XML do you think you can figure out what is causing the problem?

Rafe · Dec 22, 2015 at 11:42 AM

ardentis said:
If I give you my mixer_paths_mtp.XML do you think you can figure out what is causing the problem?

You had another audio mod installed? Your media_path_mtp had never been edited right?

Send here , I'll find out.

Cheers

schippox · Oct 20, 2012 13 5 0

Works great on e2303 with the Aogsp Rom ( http://forum.xda-developers.com/m4-aqua/development/5-0-aosgp-based-stock-t3262330 ).

Needs some finetuning, the monoSpeaker is much louder than the other one, but very nice work. I've been waiting for this. Thank you.

ianthok · Oct 30, 2015 40 29 0

WORK on my E2353 but not stereo just sound more LOUDer

Rafe said:
Hello friends!

After some work and previous experience on Xperia Z1 and LG G3 , I managed to turn the stereo on our beloved Xperia M4 , combining the earpiece and the speaker .

The process is simple , just replace the mixer_paths_mtp.xml file in the \ system \ etc .

Of course, back up your original file.

requirements :

- Rom .112 ( I have not tested the latest , but it should work , you say ok ? )

- Root

- File/root explorer

Replace , set permissions and boot .

Working flawless for me on my M4 E2306 .

Hit thanks if you like !

Cheers !

Attention: The zip is not flashable!

WORK on my E2353 with stock firmware/rom indonesia , but not stereo just sound more LOUDer

nice job dude

ardentis · Dec 22, 2015 at 4:03 PM

Rafe said:
You had another audio mod installed? Your media_path_mtp had never been edited right?

Send here , I'll find out.

Cheers

I have a Z5 lib mod for sound but the file had the same date as all the other files in that folder. I guess I can't upload XML files so rename the extension to xml

FirstMn · Dec 22, 2015 at 6:10 PM

Working great on my E2303,. 167.

alonso444 · Dec 22, 2015 at 8:16 PM

thanks work on my e2306 with 1.67

Rafe · Dec 23, 2015 at 3:07 PM

ardentis said:
I have a Z5 lib mod for sound but the file had the same date as all the other files in that folder. I guess I can't upload XML files so rename the extension to xml

Im pretty sure that the Z5 mod that you're using changes the structure and uses the Mixer_Paths.xml, not the stock Mixer_Paths_mtp.xml. I think this is the cause.

Rafe · Dec 23, 2015 at 3:14 PM

schippox said:
Works great on e2303 with the Aogsp Rom ( http://forum.xda-developers.com/m4-aqua/development/5-0-aosgp-based-stock-t3262330 ).

Needs some finetuning, the monoSpeaker is much louder than the other one, but very nice work. I've been waiting for this. Thank you.

Thanks bro!

To reduce the volume just change the values in the demarcated lines below :

RX2 - The botton speaker
RX1 - The earpiece speaker

<path name="speaker">
<ctl name="MI2S_RX Channels" value="Two" />
<ctl name="RX1 MIX1 INP1" value="RX1" />
<ctl name="RDAC2 MUX" value="RX1" />
<ctl name="HPHL" value="Switch" />
<ctl name="HPHR" value="Switch" />
<ctl name="RX3 MIX1 INP1" value="RX2" />
<ctl name="SPK DAC Switch" value="1" />
<ctl name="RX2 Digital Volume" value="88" />
<ctl name="RX1 Digital Volume" value="87" />
<ctl name="EAR PA Gain" value="POS_1P5_DB" />
<ctl name="EAR_S" value="Switch" />
</path>

<path name="speaker-ringtone">
<ctl name="MI2S_RX Channels" value="Two" />
<ctl name="RX1 MIX1 INP1" value="RX1" />
<ctl name="RDAC2 MUX" value="RX1" />
<ctl name="HPHL" value="Switch" />
<ctl name="HPHR" value="Switch" />
<ctl name="RX3 MIX1 INP1" value="RX2" />
<ctl name="SPK DAC Switch" value="1" />
<ctl name="RX2 Digital Volume" value="88" />
<ctl name="RX1 Digital Volume" value="87" />
<ctl name="EAR PA Gain" value="POS_1P5_DB" />
<ctl name="EAR_S" value="Switch" />
</path>

<path name="fm-speaker">
<ctl name="MI2S_RX Channels" value="Two" />
<ctl name="RX1 MIX1 INP1" value="RX1" />
<ctl name="RDAC2 MUX" value="RX1" />
<ctl name="HPHL" value="Switch" />
<ctl name="HPHR" value="Switch" />
<ctl name="RX3 MIX1 INP1" value="RX2" />
<ctl name="SPK DAC Switch" value="1" />
<ctl name="RX2 Digital Volume" value="88" />
<ctl name="RX1 Digital Volume" value="87" />
<ctl name="EAR PA Gain" value="POS_1P5_DB" />
<ctl name="EAR_S" value="Switch" />
</path>

Try values 85 or 86, should be better!

schippox · Dec 23, 2015

Thank you for the tip. I tested a lot of settings. Best for me is Rx1=94 and Rx2=51.. With 95 at Rx1 crackling begins with my phone.
The difference between 51 and 94 at rx2 is not big.

saitejadsst · Dec 24, 2015 at 5:03 AM

Sound not coming on E2363 26.1.b.2.102!!!!

BOLEK_PL · Dec 24, 2015 at 2:13 PM

E2303 .167 everything working perfect, sound is much better than original. Thank you :good:

schippox · Oct 20, 2012 13 5 0

Hello. Merry xmas. Ive tested a lot of settings. Here is my file for great stereo experience. Great for gaming.

Thanks @ the Threadstarter

Download:
http://www.xup.in/dl,19579812/mixer_paths_mtp.xml.zip/

Copy to /system/etc and set permission to 777.

Rafe · Dec 29, 2015 at 10:15 PM

PLUS: This mod works beautifully with this Stereo MOD V2! Sounds great!
http://forum.xda-developers.com/android/software/mod-xperia-z5-premium-walkman-including-t3252123

Put the stereo mod v2 first, after flash mod Z5 premium!

Cheers!

jms_209 · Dec 29, 2015

Rafe said:
PLUS: This mod works beautifully with this Stereo MOD V2! Sounds great!
http://forum.xda-developers.com/android/software/mod-xperia-z5-premium-walkman-including-t3252123

Put the stereo mod v2 first, after flash mod Z5 premium!

Cheers!

Did you get all xperia sound enhancements working?

If I flash the xperia z5 mod, the equalizer dosent open in the music app. Not sure how you got it working.

Rafe · Dec 29, 2015 at 10:33 PM

I've forgot to mention this sorry, Just clear the cache for the music app and it works. At least works fine here on mine ok?

Cheers

jms_209 · Aug 13, 2011 147 7 0

The equalizer does not work!

Under Audio Quality:
com.sonyericsson.soundenhancement

If I click on it, it just pushes me out to music home screen.

[sound mod] V3 - Stereo Speakers!

Senior Member

Attachments

Senior Member

Senior Member

Senior Member

Senior Member

Member

Member

Senior Member

Attachments

Senior Member

Senior Member

Senior Member

Senior Member

Member

Senior Member

Senior Member

Member

Senior Member

Senior Member

Senior Member

Senior Member