[SplashScreens] Android, WP7 and Stock Splash Screens for HD2

Search This thread
By:
Advanced…
akapaul26

akapaul26

Senior Member
Nov 26, 2010
5,300
6,371
South Lyon, MI USA
Another contribution from me! Hope you like it!
 

Attachments

  • cutep-1.jpg
    cutep-1.jpg
    39.6 KB · Views: 498
Last edited:
mskip

mskip

Retired Senior Moderator
Mar 20, 2008
12,328
16,068
Norfolk
erick1026 said:
could this also work if i dont have nand but the a custom rom like elegancia
Click to expand...
Click to collapse
These splashscreens will work whether you are running WinMo, NAND Android or NAND WP7. Its the first screen that shows and will work on any OS.

As long as you can enter bootloader screen you can flash it.

Mark.
 
N

nghockcheng

Member
Dec 15, 2006
35
1
2nd stationary splash screen after Magldr loaded

T-Macgnolia said:
Well if you want something more eligant then you should check out cLK. If you do not know what cLK is click on my guide I have in my sig, I give details on cLK how to flash it and how to flash CWM once you have cLK flashed.

MAGLDR is made to run more than one different OS on the HD2 therfor I do not think we will ever see a new release that does not show MAGLDR booting up Android or Windows Phone 7. This is the text you say you see that I am talking about here.

With cLK it is a custom booloader that works just with Android and makes the HD2 pretty much just like a native Android device. I use cLK as my Android bootloader and when I boot up my HD2 this is what I see.

1. The first splash screen of the joker holding a card that I got from this thread.

2. The black screen with just tje stationary Android figure in white outline.

3. The same Android figure but in the bootanimation where it sulidafies from particules and the goes back to particules.

4. My Android lock screen after it has finished booting Android.
Click to expand...
Click to collapse

I would like to know how to change the splash screen in your boot sequence step no.2. I had the same boot animation as yours. After I change my boot animation, I still get the stationary
Android robot outline before the boot animation. Any idea how to remove that or change it?
 
orangekid

orangekid

Sr. Mod / Mod Committee / RC-RT Committee
Staff member
Apr 10, 2009
14,717
8,840
nghockcheng said:
I would like to know how to change the splash screen in your boot sequence step no.2. I had the same boot animation as yours. After I change my boot animation, I still get the stationary
Android robot outline before the boot animation. Any idea how to remove that or change it?
Click to expand...
Click to collapse

You have to change the initrd.gz file, but you can only extract it using linux. Once you extract the file you replace the splash screen, then you rebuild the file and you're good to go.
 
H

HD2_TTs

Member
Nov 19, 2010
31
1
Hi, I have a question, I believe you can help. I am running a nand android rom.
I am trying to flash a splash screen using CustomRUU, i follow the steps until the 4 coloured screen writing USB at the bottom and when i run customRUU I receive an error 260 message that it cannot establish connection. I tried all my USB ports and did a few reboots at pc and phone as well. Still the same message.
Any ideas?
 
Last edited:
O

omegatec

Member
Mar 29, 2011
9
4
Santa Ana
Some Splash Screens

Here i´ve just make some images for testing, take a look...:)

I was going to put some images but...

"To prevent spam to the forums, ALL new users are not permitted to post outside links in their messages. After approximately eight posts, you will be able to post outside links. Thanks for understanding!"

so it will be just the zip... enjoy...
 

Attachments

  • Omegatec_Splash_Test.zip
    2.5 MB · Views: 60
Rudyfastcat

Rudyfastcat

Senior Member
Jun 24, 2010
621
116
San Antonio, TX
Hello all , as you can see from my signature I am on Dorimanx CLK Nandroid
and I have just one question to ask.
When I boot I have 4 boot screens, 1st one is the custom splash screen I
flash, the 2nd is the Pink stationary "Stick Together" T-Mobile, 3rd is the
non animated ROM splash and 4th is the Rom's animated boot screen.
What I want to know is how do I change the 2nd Pink stationary "Stick Together" T-Mobile boot screen.
I have tried flashing different custom boot screens but the Pink stationary "Stick Together" T-Mobile boot screen is still there
Thanks for you help :)

I have included pics of my boot screens in order as they appear (from left to right)

Edit : PLZ disregard my question as I can see it was already asked, I have to edit the initrd.gz file
 
Last edited:
You must log in or register to reply here.

Similar threads

SOLRAC13
Skype for HTC HD2
Replies
153
Views
209K
E
eazmard
S
HD2 Touch Screen Not Responding
Replies
234
Views
158K
guv_nor
guv_nor
fireflamesniper
  • Locked
DFT Forum's HTC HD2 WP7 Rom Status
Replies
316
Views
96K
joshkoss
joshkoss
8
HTC Leo = The first decent HTC phone in a long time
Replies
2K
Views
394K
Tref
Tref
Reignzone
°°° Post your HD2 Screen Shots Here! °°°
Replies
564
Views
124K
S
snowman2765

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 70
    mskip
    mskip
    Now that NAND ANDROID is a reality for the HD2 I have seen users asking for Android Splash Screens so I thought I would make some and pass them on. I am also supplying the LEO Stock Splash Screen if you want to go back.

    Simply follow the instructions:

    1. Download the desired Splash Screen and extract the contents to a new folder on your pc.
    2. Shut down your phone (doesnt matter if you have already flashed a NAND Android Rom)
    3. Enter Bootloader Mode by Holding the 'Volume Down' button while briefly pressing the 'Power' button. Keep holding the 'Volume Down' button until the tri colour screen appears.
    4. Plug in your usb cable so that it says 'usb' at the bottom of the screen
    5. Run the CustomRuu.exe file and follow the instructions
    6. When flashing is complete the phone will reboot

    Windows Phone SplashScreens for people who have flashed WP7 can be found in Post2 *HERE*

    *If you want to make your own Splash Screen then read Post3 *HERE* for instructions and download the attached file*

    NOTE: If members want to post their own custom Splash Screens can they also please attach the .nbh file (zip it up with the customruu) so they can be used by other members who like them :)

    hd2android1.jpg
    hd2android2.jpg
    hd2android3.jpg
    hd2android4.jpg
    hd2android5.jpg
    hd2android6.jpg



    Extra Splash Screens made by Users can be found at the following posts:
    *HERE* (by mskip)
    *HERE* (by fredulus)
    *HERE* (by TurboKan)
    *HERE* (by Crypter)
    *HERE* is the Stock TMOUS SplashScreen (by mskip)
    *HERE* and *HERE* (by mrhaynes)
    *HERE* and *HERE* and *HERE* (by crowbarr)
    *HERE* (by Madraum)
    *HERE* (by ByteFax)
    *HERE* and *HERE* and *HERE* (by KillaHurtz)
    *HERE* and *HERE* and *HERE* (by yllivia)
    *HERE* and *HERE* and *HERE* (by Matthew33)
    *HERE* and *HERE* (by jsmccabe78)
    *HERE* and *HERE* and *HERE* (by bartju94)
    *HERE* (by dodietheshorters)
    *HERE* (by gear_rus)
    *HERE* and *HERE* (by wil_badger)
    *HERE* (by bodybuilder27)
    *HERE* (by kabooom)
    *HERE* (by akapaul26)
    View
    31
    mskip
    mskip
    How to Make your Own Splash Screen For the HTC HD2

    [UPDATED 12TH JAN 2011] ADDED WINDOWS BATCH FILE TO AUTOMATE PROCESS

    1. Download the attached file and extract the contents to your pc
    2. Create your image 480x800 and save as 24bit bmp
    3. Copy your bmp to the same folder as MakeNBH.bat
    4. Run MakeNBH.bat
    5. Follow the onscreen prompts to create your nbh file
    6. Flash the nbh file that is created using customruu via bootloader or activesync (winmo only) and job done

    You only flash the boot image, i mean the one that has the number of radio and rom at the bottom,
    and nothing else, radio and rom remain unchanged.



    === nbimg v1.1
    === Convert NB <--> BMP splash screens
    === (c)2008 Pau Oliva - pof @ xda-developers

    Usage: nbimg -F file.[nb|bmp]

    Mandatory arguments:
    -F <filename> Filename to convert.
    If the extension is BMP it will be converted to NB.
    If the extension is NB it will be converted to BMP.

    Optional arguments:
    -w <width> Image width in pixels. If not specified will be autodetected.
    -h <height> Image height in pixels. If not specified will be autodetected.
    -t <pattern> Manually specify the padding pattern (usually 0 or 255).
    -p <size> Manually specify the padding size.
    -n Do not add HTC splash signature to NB file.
    -s Output smartphone format.

    NBH arguments: (only when converting from BMP to NBH)
    -D <model_id> Generate NBH with specified Model ID (mandatory)
    -S <chunksize> NBH SignMaxChunkSize (64 or 1024)
    -T <type> NBH header type, this is typically 0x600 or 0x601
    View
    21
    mskip
    mskip
    WINDOWS PHONE SPLASH SCREENS

    Now that NAND WP7 is a reality for the HD2 I thought I would make some Windows Phone Splash Screens to give people the full effect

    Simply follow the instructions:

    1. Download the desired Splash Screen and extract the contents to a new folder on your pc.
    2. Shut down your phone (doesnt matter if you have already flashed a NAND Android Rom)
    3. Enter Bootloader Mode by Holding the 'Volume Down' button while briefly pressing the 'Power' button. Keep holding the 'Volume Down' button until the tri colour screen appears.
    4. Plug in your usb cable so that it says 'usb' at the bottom of the screen
    5. Run the CustomRuu.exe file and follow the instructions
    6. When flashing is complete the phone will reboot

    splashscreenwp71.jpg
    splashscreenwp72.jpg


    splashscreenwp73.jpg
    splashscreenwp74.jpg


    SplashScreen *HERE* (by m-deejay)
    View
    8
    KillaHurtz
    KillaHurtz
    My Contribution

    Cool post, been using this method for quite some time :D
    images in .zip are 480x800 & ready to flash !
    Don't forget to hit thanx if u like em :D

    hd2win31.jpg
    being480x800.jpg

    androidhtc.jpg
    htcsplashblack.jpg


    **I included the archive NBIMG it contains the nbimg utility as well as the images above & the rom flasher all in one folder. To open a command prompt in a directory simply hold shift & right click in it & select 'open command promp here'. Makes it alot easier if everything is in one folder. Enjoy !

    #Edit
    -----------------------------------------------------------------------------
    Heres a video tutorial I just made for you guys, Happy flashing !
    http://www.youtube.com/watch?v=WTa7QRk-EMY
    -----------------------------------------------------------------------------
    View
    8
    B
    bartju94
    KillaHurtz said:
    Lovin' em bartju94 ! How bout a cyan android one ?
    Click to expand...
    Click to collapse

    Here you go ;)

    splashhd2bigcyan.png
    View

New posts