• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[STABLE] LineageOS 17.1 for Samsung Galaxy Grand Prime [UNOFFICIAL]

Search This thread

Hash995

Member
Feb 1, 2021
7
0
Try
- Do some reading on proper installation.
-Odin 3.10.7.zip (https://odindownload.com/download/)
-TWRP-3.2.3-lineage-15.1_j8_20180921_gprimeltetfnvzw.tar (https://msm8916.com}
-lineage-17.1-20210103-UNOFFICIAL-gprimeltetfnvzw.zip (https://androidfilehost.com/?w=files&flid=321629)
-OpenGApps (https://opengapps.org/) Select ARM then 10.0 and Variant: (the closer to the top the bigger the file & more apps.)
Double Check You Have an ARM Processor !!!
I do everything you say but does not work and it says when installing in twrp that rom for gp 3g
 

GreyCloudSamsung

New member
Jan 30, 2021
4
0
Hey. Not sure what step you're at. Check these links. Never hurts to watch it again. Use the files for your phone.
Backup if you want to keep anything.
Root first. Use Odin to Load TWRP. Put Lineage and GApps on a memory card with nothing else. Wipe and Install with TWRP.
 

salehahmadi

New member
Jan 3, 2011
3
0
Hi,
Thanks for your development, this has become my daily rom for the past few months.
I rooted my device before installing this rom using CF-Root, installed TWRP and then proceed with the tutorial of installing this rom. It has installed been installed and is working well. I use a root checker and it tells me that the device is not rooted!. so I tried to root it again, and I no matter if I install or flash cf-root, super su app doesn't show up in this build. It successfully flashes CF-Root again, and super su, but the doesn't show up in app drawer and when I install the app manually, it tell again that "Root Undetected". what can I do to solve this? It's g530h (FPRTUNAVE3G).
Thank you very much.
 

ErikChimello

Member
May 20, 2019
13
4
Hi! First of all, thank you for your work.
I've used this rom for a while, but I had to go back to LineageOS 14.1 because of a couple of issues:
1. There's a visual bug every time I turn on the phone. Basically, blue lines appear on the screen and don't allow me to unlock the SIM card. They go away after a few seconds, but they go away immediately if I turn off and then back on the screen. If I do this though, the SIM takes a lot of time to unlock after I inserted the PIN.
2. This is the main issue. I use this phone as a Wi-Fi hotspot, so data speed is important for me. With this rom, I have about 5-10 Mbps in download. With LineageOS 14.1, I have more than 40 Mbps.
Is there any way you could fix this with a future update? Or is there anything I can do to fix this?
I've never created any logs (so I don't know how to), but I can do it if needed.
 

ari666

Member
Feb 5, 2015
40
7
Dimapur
Hi! First of all, thank you for your work.
I've used this rom for a while, but I had to go back to LineageOS 14.1 because of a couple of issues:
1. There's a visual bug every time I turn on the phone. Basically, blue lines appear on the screen and don't allow me to unlock the SIM card. They go away after a few seconds, but they go away immediately if I turn off and then back on the screen. If I do this though, the SIM takes a lot of time to unlock after I inserted the PIN.
2. This is the main issue. I use this phone as a Wi-Fi hotspot, so data speed is important for me. With this rom, I have about 5-10 Mbps in download. With LineageOS 14.1, I have more than 40 Mbps.
Is there any way you could fix this with a future update? Or is there anything I can do to fix this?
I've never created any logs (so I don't know how to), but I can do it if needed.
Please Share the link of LineageOS 14.1 youre using. Thank you
 

TRGameAirs

Member
Sep 11, 2017
36
3
will the go version come?
In this version, the screen is stuck in blue at the first startup and it is corrected when you press the shutdown key.( There's a visual bug every time I turn on the phone. Basically, blue lines appear on the screen)
 
Last edited:

rybaumtw

New member
Mar 15, 2021
1
0
Hello.
thank you for your work! Well done!
yesterday I installed a new system on my SM-G530FZ.
It was the first time in my life that I did something like that.
So far everything works as it should!
 

Attachments

  • 160924006_2875109216040531_6412546943445409888_n.jpg
    160924006_2875109216040531_6412546943445409888_n.jpg
    158.3 KB · Views: 25
  • 161072163_1158872517906329_7657336893799492379_n.jpg
    161072163_1158872517906329_7657336893799492379_n.jpg
    147.4 KB · Views: 24

pez101

Member
Apr 25, 2021
17
1
So i don't know what's happening I have everything correct but i get error code 7 when trying to install in twrp.
I tryed magisk after uninstalling super su and it still dont work
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 10
    2okPze5.png


    LineageOS 17.1 is a free, community built, aftermarket firmware distribution of Android 10.0, which is designed to increase performance and reliability over stock Android for your device.
    LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed.

    Code:
    # Disclaimer
    # I am not responsible if flashing this ROM bricks your
    # phone or causes thermonuclear war and ends the
    # world as we know it. You have been warned.

    ROM Information

    Screenshots
    Attached to this thread

    What works
    - RIL (in-call audio, messaging, data)
    - Bluetooth
    - WiFi
    - Audio (music, etc)
    - Camera (including video recording)
    - Flash
    - Sensors
    - GPS
    - Brightness controls
    - Bluetooth audio

    Downloads
    ROM: Here
    OpenGApps: Here

    Device Names

    Code:
    SM-G530T/T1/W - gprimelte
    SM-G530P - gprimeltespr
    SM-S920L - gprimeltetfnvzw
    SM-G530MU - gprimeltezt
    SM-G530FZ - gprimeltexx
    SM-G530M - fortunalteub
    SM-G530F - fortunaltedx
    SM-G530H (XXU/XXS) - fortuna3g
    SM-G530H (XXC) - fortunave3g

    Installation
    1. Install TWRP or PBRP (if supported)
    2. Boot to Recovery
    2.5. Make a full backup (just in case something goes wrong)
    3. Make a full wipe(System, Data, Cache)
    Code:
    # If you are already running LineageOS 16.0
    # (by Galaxy-MSM8916) you can make a dirty flash
    # (flash the build and the Android 10 GApps)
    # but a wipe is recommended
    4. Download the latest build and transfer it to your phone
    5. Flash the zip
    5.5. If you are installing GApps do it before booting to the ROM. Make sure to flash the correct architecture and version(arm 10.0)

    Do note that on boot device takes several minutes as it optimizes all the apps.

    You should provide logs when reporting any hardware-related issue.

    Credits
    I would like to everyone who has helped me throughout the whole process of making Q for Grand Prime
    Galaxy-MSM8916 for bringing up Q sources
    People who helped me make this kernel

    Source code
    Kernel source code: https://github.com/itexpert120/android_kernel_samsung_msm8916
    ROM Source code: https://github.com/LineageOS
    Device trees: https://github.com/itexpert120/android_device_samsung_msm8916-common


    XDA Thread Information
    LineageOS 17.1 for Samsung Galaxy Grand Prime

    Contributors

    @ itexpert.120, @Soft-Bullet
    ROM OS Version: Android 10
    ROM Kernel: Linux 3.10.x
    ROM Firmware Required: Stock 5.0.2
    Based On: AOSP

    Version Information
    Status:
    Stable

    Created 2020-08-07
    3
    Thanks to Everyone who helped me get to this point. Thanks to all the Devs and Testers.
    Join the Grand Prime Telegram Community at: https://t.me/grandprimedev
    2
    Changelog:-


    First Build
    Code:
    - Powered by AnotherKernel
    - CPU OC to 1.6 Ghz
    - GPU OC to 650 Mhz
    - Hotplugs and Governors Added
    - blu_active as default governor
    - Performance Enhancements
    - Batter Battery
    - Ram Management Enhanced
    - And More

    Second Build
    Code:
    - AnotherKernel Enhanced
    - Zram Fixed for fortuna3g
    - Increased Zram to 512 mb
    - More Optimizations
    - Battery further Increased
    - Added Some Defaults
    - Android Go
    - And More

    Third Build
    Code:
    - Endgame Kernel
    - Redid All trees from Zero
    - Fixed Bugs
    - Seperated Go and Non Go builds
    - Battery further Increased
    - Fixed Camera not taking pictures
    - And More

    Fourth Build
    Code:
    - Fixed SMS Bug
    - Dropped support for Non Go Builds
    - Increase ZRAM
    - Added More Tweaks
    - Attempted to fix brightness bar
    - And More

    Fifth Build
    Code:
    - Updated Source
    - GPU OC increased to 750Hz
    - Enhanced Stability and Performance
    - And More

    Sixth Build
    Code:
    - Updated Android Source
    - Fixed SafetyNet
    - Enhanced Battery and Performance
    - And More

    Seventh Build
    Code:
    - Many Changes to Kernel and Default Kernel Parameters
    - Increase Stability and Performance
    - And More

    2
    Quick note, I am gonna be a little busy for a few days so I won't be able to update stuff
    2
    Stable Builds Coming Soon (TM)