Recognized Dev / Inactive Recognized Contributor
- Jun 23, 2010
T-Mobile LG G3 D851 30D
This thread covers various methods of installing both stock and stock rooted Marshmallow 6.0 30D onto the T-Mobile LG G3 D851.
30D is the first official Marshmallow Android 6 update for the T-Mobile LG G3.
It was first released in KDZ form the morning of April 27 2016.
Official update methods include both an OTA update from 20G to 30D and a KDZ update through the LG Mobile Support Tool.
The bootloader is still unlocked with no sort of OEM Unlock toggle. Still no bootloader/fastboot mode.
Kingroot can temp-root 30D! At least 1 Marshmallow build will always have root. Not very secure... but good for modders.
Android Version: 6.0
Android security patch level: 2016-04-01
Baseband version: MPSS.DI.2.0.1.c1.13-00114-M8974AAAAANPZM-1.43646.2
Kernel version: 3.4.0
Build number: MRA58K
Software version D85130d
Security software version: MDF v1.1 Release 2
When the software update is available, the update icon will display in the status bar at the top of the screen.
Swipe down from the top and tap the notification.
Restart & Install
Note: If prompted, connect to a Wi-Fi network to download the software update.
Your device will restart to perform the update.
When the update is complete, your phone will restart and transition through a series of alerts stating "Android is upgrading".
Once your phone has powered on you will be notified that the software update successfully installed. Tap "OK" to close the notification.
If you have not been notified of an available software update, you can manually check if one is available.
From the Home Screen, tap Apps > Settings > General Tab > About phone
System updates > Check now to manually check for a new update.
You will be prompted if a new software update is available.
LG Mobile Flash Tool:
Click here to download the LG Mobile Support Tool to your computer, then open.
Connect your phone to your PC.
Tap Start Upgrade within the LG Mobile Support Tool to begin.
Device will progress through Analysis, Download, Update and Complete during the update process.
While updating, the device will power off and enter a download mode at 5% completion. This is normal. DO NOT DISCONNECT THE USB CABLE!
At approx 95% of completion, the device will power on. This may take several minutes. This is normal. DO NOT DISCONNECT THE USB CABLE!
If your software update stops before it has completed, please do not close the update tool and try the update again. Additional troubleshooting steps are below.
The tool will notify you when the update is complete. Tap Exit to return to the main screen.
Wait for device to power on. Once powered on, the device will reconnect to the LG Mobile Support Tool. When connected, observe that the version number reflects the latest Software D85110r. It is now OK to DISCONNECT THE USB CABLE.
If the phone software upgrade stopped before completion, please do not close the update tool and try to update again following original instructions.
If you already closed the update tool, and the phone will not turn on normally, please follow the steps below:
Remove back cover and battery.
Record IMEI/ESN/MEID from device label in battery well.
Replace battery and back cover.
Open LG Mobile Support Tool.
Connect the device to PC via USB cable.
From the drop down menu, select Options > Upgrade Recovery.
Enter your phone information and tap OK
After checking the phone information, it will start to update automatically. If it does not work, the device may require service to attempt recovery.
TWRP + Flashable-ZIPs:
These directions should be used by anyone who already has TWRP installed on their D851.
I used the latest TWRP 3.0 build @ https://dl.twrp.me/d851/
Don't want root? Then it's probably easiest to just flash the stock KDZ using LGUP.. or just skip the SuperSu steps.
1. Download the following 3 files and place them on the internal or external sdcard:
a. LG-D85130D-Flashable.COMPLETE.zip2. (re)Boot into TWRP if not there already.
c. SuperSU 2.65 or higher. [STABLE] or [BETA] Thanks to Chainfire!
3.* Backup current partitions: boot, system, data, efs (backing up anything is optional but suggested)
4.* Up to you if you want to wipe data (TWRP > Wipe > Swipe slider) but not needed if coming from a stock rom.
5. Install the 3 zip files you put on your sdcard, 1 at a time:
a. LG-D85130D-Flashable.COMPLETE.zip (Install > select zip > swipe to confirm/flash)
b. LG-D85130D-Flashable.Boot-AUTOREPACK.zip (Install > select zip > swipe to confirm/flash)
c. SuperSU zip (Install > select zip > swipe to confirm/flash)
After zips finish flashing you can reboot! If TWRP asks if you want to install SU, hit no. If TWRP says No OS installed, ignore it.
Alternatively, if you are already on 30D already without root and want root/TWRP you can use Kingroot.
Click the button below to display how-to steps...
1. Download the latest Kingroot APK here.
2. Install Kingroot and get temproot with it.
3. Download TWRP @ https://dl.twrp.me/d851/ and download LG-D85130D-Flashable.Boot-AUTOREPACK.zip linked below.
4. Enable USB Debugging on your D851 and connect your device to the computer and run the following commands to install TWRP.
[if no computer]Code:
adb push LG-D85130D-Flashable.Boot-AUTOREPACK.zip /sdcard/ adb push twrp-3.0.0-0-d851.img /sdcard/ adb shell su dd if=/sdcard/twrp-3.0.0-0-d851.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery reboot recovery
d/l TWRP n Boo Repack onto phone n move it to root of internal storage.
Run the su, dd and reboot commands above in terminal emulator.
5.* Backup current partitions: boot, system, data, efs (backing up anything is optional but suggested)
6.* Up to you if you want to wipe data (TWRP > Wipe > Swipe slider) but not needed if coming from a stock rom.
7. Install the 2 zip files you put on your sdcard, 1 at a time:
a. LG-D85130D-Flashable.Boot-AUTOREPACK.zip (Install > select zip > swipe to confirm/flash)
b. SuperSU zip (Install > select zip > swipe to confirm/flash)
Please do not mirror my files!
100% stock untouched system, boot, modem and bootloader. Recovery is not included so you don't lose TWRP.
This is a flashable stock 30D modem.
This is a flashable stock 30D boot.img. Boot.img contains kernel + dtb + ramdisk.
This is a repacked boot.img to work properly when flashing SuperSu in TWRP.
This is a flashable stock 30D bootloader. It contains aboot, dbi, factory, laf, rpm, sbl1 and tz.
Also, KDZ + all stock images for 30D are available in the link below...
30D KDZ Mirror Here
Click button below to view MD5 for each file...
MD5 (aboot.img) = 3a984c57cea36f8356f5068cc7cdd4b4
MD5 (boot.img) = 98bfe8aaeb7e169d78ad249b5c362214
MD5 (dbi.img) = 1a78fd7454f7d0a6fa1bc71aa15c12e8
MD5 (factory.img) = 794327b47c4f1cd503591d804ab2a458
MD5 (laf.img) = 1e5971ef828b0d6afdfa4690efa26308
MD5 (modem.img) = 3969d7e27ffb83b5873c0ac9c796ea1d
MD5 (persist.img) = 039a73fb1b36df8cab1c0861cdea6bf3
MD5 (recovery.img) = 339bd050ddfac269f5c1c7ee36217df3
MD5 (rpm.img) = e9d136d6a7fcdd3726696a111f4b8f8e
MD5 (sbl1.img) = c4ec620062aaa2f7ebafa67c43218665
MD5 (system.img) = f22c8366fab71f65f5f50c7e8eaaa1cd
MD5 (tz.img) = 36a7d694d17f0f8183c0afb825dc9512
MD5 (LG-D85130D-Flashable.Boot-AUTOREPACK.zip) = f7f9507a81333f0a4e8a16033018e8b9
MD5 (LG-D85130D-Flashable.Boot.zip) = ffba4ffc1842c65b1f1defc2dc103330
MD5 (LG-D85130D-Flashable.Bootloader.zip) = cf37b49ab3b85eba9d0d43c5927d215d
MD5 (LG-D85130D-Flashable.COMPLETE.zip) = d2cbb2c8675bf0adc412b760c05ceb29
MD5 (LG-D85130D-Flashable.Modem.zip) = 87b50d33e7b0fba62847a2792648a310
MD5 (D85130d_00_0404.kdz) = a3d04df6fa1e964bd10b5e2ae59041ae
Take all your nonsense to the marshmallow general thread here - http://forum.xda-developers.com/tmo...-t-mobile-lg-g3-d851-30d-marshmallow-t3367030
y u quote OP?
Follow me on twitter for future updates on LG-related things - twitter.com/@utoprime
Find this thread helpful? Hit the Thanks button!
Feeling extra generous? Click my name at the top of any post and hit donate or click here.