[STOCK] D851 30D KDZ + Flashable ZIPs + All IMGs (Marshmallow!!)

Search This thread
By:
Advanced…
MESA

MESA

Senior Member
Jun 13, 2012
1,087
865
Xiaomi Poco X3 NFC
Xiaomi Poco X3 Pro
zimmerma379 said:
Can anyone help me understand one of the components here? What is the AUTOREPACK boot.img? It's a SuperSU-modified stock boot.img? In what particular way(s)? I'm asking because #1 I like to fully understand how all this stuff works and #2 I'd like to use the process described here with the 'D85130g_00_0420.kdz' I've downloaded to go from D85120G to D85130G. Thx!
Click to expand...
Click to collapse
Go here and download this. Just flash it in TWRP after wiping and flash magisk. And you will have the latest rooted v30G. :)
 
  • Like
Reactions: akshargajjar
D

decaturbob

Senior Member
Mar 30, 2011
2,492
842
Decatur
MESA said:
Go here and download this. Just flash it in TWRP after wiping and flash magisk. And you will have the latest rooted v30G. :)
Click to expand...
Click to collapse

Mesa,
been over 3 years since I rooted and installed my custom rom on my D851 LG3, so to upgrade from my 4.4.x 10R based rom you are saying I just download the LG-D85130G-Flashable.COMPLETE.zip and then flash Magisk all thru TWRP and don't have to unroot or anything else? I'm just asking as Im not familiar with Magisk and looked at that topic and it said to unroot before flashing
 
MESA

MESA

Senior Member
Jun 13, 2012
1,087
865
Xiaomi Poco X3 NFC
Xiaomi Poco X3 Pro
decaturbob said:
Mesa,
been over 3 years since I rooted and installed my custom rom on my D851 LG3, so to upgrade from my 4.4.x 10R based rom you are saying I just download the LG-D85130G-Flashable.COMPLETE.zip and then flash Magisk all thru TWRP and don't have to unroot or anything else? I'm just asking as Im not familiar with Magisk and looked at that topic and it said to unroot before flashing
Click to expand...
Click to collapse

Well I think it should work because this contains almost all kdz files. In worst case scenario, you should have to flash lollipop kdz and root it and then flash this.
Follow this:
1. Wipe from twrp(without internal and external storage)
2. Flash LG-D85130G-Flashable.COMPLETE.zip
3. Flash this https://mega.nz/#!KZlm2ZIY!LUCjzTc3AXm9-F2KmEfp2oj2It9iAOTDSyGNeUrDzIE (you can skip it if this don't work)
4. Download and flash magisk 13.3
5. Finally reboot and enjoy the phone :D
 
  • Like
Reactions: akshargajjar
billard412

billard412

Senior Member
Jan 9, 2012
1,866
2,014
31
Da burg (412), PA
www.sxtpdevelopers.com
So i made a 10M kk version of this. Is it safe to use it to downgrade? I know some phones can brick if you downgrade like this.
I also see this doesn't flash the rct or gpt partitions. Any particular reasons? Is it safe to add them to mine?
 
Last edited:
F

fivemill

Member
Jan 5, 2014
38
1
So the OP says: LG-D85130D-Flashable.COMPLETE.zip 100% stock untouched system, boot, modem and bootloader. Recovery is not included so you don't lose TWRP.

I'm needing my phone to go back to stock Marshmallow 100% untouched, including recovery. What is the best way to accomplish this? The lgmobile.com site used to have a kdz file to download, but I cannot find it any more. Thanks in advance!
 
marcdw

marcdw

Senior Member
Sep 24, 2014
5,751
2,894
59
Baldwin Park
fivemill said:
So the OP says: LG-D85130D-Flashable.COMPLETE.zip 100% stock untouched system, boot, modem and bootloader. Recovery is not included so you don't lose TWRP.

I'm needing my phone to go back to stock Marshmallow 100% untouched, including recovery. What is the best way to accomplish this? The lgmobile.com site used to have a kdz file to download, but I cannot find it any more. Thanks in advance!
Click to expand...
Click to collapse

Link to the KDZ is in the OP. Codefire site. Just checked and it works.

LG G3 D851, PAC-MAN LP ROM, MultiROM, Tapatalk 4.9.5
 
  • Like
Reactions: akshargajjar
F

fivemill

Member
Jan 5, 2014
38
1
marcdw said:
Link to the KDZ is in the OP. Codefire site. Just checked and it works.

LG G3 D851, PAC-MAN LP ROM, MultiROM, Tapatalk 4.9.5
Click to expand...
Click to collapse

Indeed, thanks for the pointer. I initially didn't know which file it was.

For anyone else, D85130d_00_0404.kdz in the codefire directory is the complete stock kdz, including recovery.
 
  • Like
Reactions: marcdw
marcdw

marcdw

Senior Member
Sep 24, 2014
5,751
2,894
59
Baldwin Park
Tested it but didn't actually get it. I better download that while I can. I have two D851s, both with failed SD card slots. I might want to send one in for repair (if affordable) so I'll need to go stock, too.



LG G3 D851, LiquidSmooth v4.1 ROM, MultiROM, Tapatalk 4.9.5
 
  • Like
Reactions: akshargajjar
B

Braaainz

Senior Member
Jan 19, 2013
130
30
LG V60 ThinQ
I was rooted on stock 30d.
I recently tried flashing a new ROM using TWRP 3.1.1 and it borked. I lost TWRP and root.

I used KingoRoot to regain root, then flashed TWRP 3.0.2. I then restored a previous NANDROID to regain permanent root.
However, when I restored the previous NANROID, I got "Unable to locate '/firmware' partition". The rest of the restore worked however and I'm once again rooted with TWRP.

I flashed a 30g ROM and replaced SuperSU with Magisk. I've reflashed TWRP 3.0.2 also.

However, whenever I'm doing a NADROID backup, I'm still getting the :Unable to locate '/firmware' partition" at the beginning and end of making the NANDROID.

Everything seems to work, but I'm wondering if it might be a good idea to do a total reload of firmware and the works.

If I flash these files thru TWRP, then TWRP and Magisk, will I retain root and also have a total reset of firmware, partitions, etc?
I'm thinking no, that I have to use LGUP to flash the kdz, but am hoping I'm wrong.
 
  • Like
Reactions: akshargajjar
A

akshargajjar

Member
Aug 13, 2017
26
1
Samsung Galaxy S21 Ultra
MESA said:
Well I think it should work because this contains almost all kdz files. In worst case scenario, you should have to flash lollipop kdz and root it and then flash this.
Follow this:
1. Wipe from twrp(without internal and external storage)
2. Flash LG-D85130G-Flashable.COMPLETE.zip
3. Flash this https://mega.nz/#!KZlm2ZIY!LUCjzTc3AXm9-F2KmEfp2oj2It9iAOTDSyGNeUrDzIE (you can skip it if this don't work)
4. Download and flash magisk 13.3
5. Finally reboot and enjoy the phone :D
Click to expand...
Click to collapse


thank you it works

can u show me how to install RR 5.8.4 LATEST on d851 after above procedure step wise
becasue im new here

thanks mate
 
K

kinfolk248

Senior Member
Feb 27, 2010
1,400
178
Jackson, Ms
Am I the only one trying to get 30d running on a nougat rom? Do I really have to downgrade all the way back to the complete zip, modem, su, or whatever in the op? Who is gonna say yes and make me cry?

I'm on the 10b modem btw
 
marcdw

marcdw

Senior Member
Sep 24, 2014
5,751
2,894
59
Baldwin Park
Not sure what you mean by "30d running on a nougat ROM". 30d is marshmallow so it doesn't run on anything except itself. ?
What exactly is it that you are doing or want to do? And what is 10b. When I got my G3 D851 back in mid 2014 it was on 10m KitKat. Was on 10r up until it got bricked late 2016. A couple of early Nougat ROMs worked with 10r. Now it's on 20e (partitions) with 20g modem. No problems up to and including Oreo.

Please give us some details. See if we can help out.


ZTE Axon 7 A2017U, Dark ROM, microG (NoGAPPS), Tapatalk 4.9.5
 
Last edited:
K

kinfolk248

Senior Member
Feb 27, 2010
1,400
178
Jackson, Ms
marcdw said:
Not sure what you mean by "30d running on a nougat ROM". 30d is marshmallow so it doesn't run on anything except itself.
What exactly is it that you are doing or want to do? And what is 10b. When I got my G3 D851 back in mid 2014 it was on 10m KitKat. Was on 10r up until it got bricked late 2016. A couple of early Nougat ROMs worked with 10r. Now it's on 20e (partitions) with 20g modem. No problems up to and including Oreo.

Please give us some details. See if we can help out.


ZTE Axon 7 A2017U, Dark ROM, microG (NoGAPPS), Tapatalk 4.9.5
Click to expand...
Click to collapse
Yea i realized i said 10b instead of 10m, twas texting a hunny and falling asleep lol. But yea I am on 10m now and wondering how to get a more modern modem basically. I am running a nougat custom rom now. I only want a newer modem to see if it will get better signal in some of these dead spots. I know TMo can get a better than what I have now.
 
marcdw

marcdw

Senior Member
Sep 24, 2014
5,751
2,894
59
Baldwin Park
@kinfolk248,
LOL, oh, I see.
Hmm, I wonder what would happen if you flashed a Lollipop modem over 10m. I'm thinking it might not work if incompatible with KitKat partitions. I know that a 30 modem used to break all of my ROMs.
As long as you have a 10m or 10r modem handy you could try the LP modems. Go back to 10 if it doesn't work.
I have 20b and 20g up on Mega.

https://mega.nz/#F!WVRWmDII!oeZ17walw3sOi71mDkCKrw

My G3 last had stock Lollipop (via KDZ after it got bricked) so I use 20g modem.


LG G3 D851, AOSPA 7.3.1-EOL ROM, MultiROM, Tapatalk 4.9.5
 
K

kinfolk248

Senior Member
Feb 27, 2010
1,400
178
Jackson, Ms
marcdw said:
@kinfolk248,
LOL, oh, I see.
Hmm, I wonder what would happen if you flashed a Lollipop modem over 10m. I'm thinking it might not work if incompatible with KitKat partitions. I know that a 30 modem used to break all of my ROMs.
As long as you have a 10m or 10r modem handy you could try the LP modems. Go back to 10 if it doesn't work.
I have 20b and 20g up on Mega.

https://mega.nz/#F!WVRWmDII!oeZ17walw3sOi71mDkCKrw

My G3 last had stock Lollipop (via KDZ after it got bricked) so I use 20g modem.


LG G3 D851, AOSPA 7.3.1-EOL ROM, MultiROM, Tapatalk 4.9.5
Click to expand...
Click to collapse

Ok so since it's known to break stuff I'll leave 30 alone because I'm not for breaking stuff lol. So I'll try the two 20 modems and give it a go, as soon as I get a backup 10m.
 
K

kinfolk248

Senior Member
Feb 27, 2010
1,400
178
Jackson, Ms
marcdw said:
@kinfolk248,
LOL, oh, I see.
Hmm, I wonder what would happen if you flashed a Lollipop modem over 10m. I'm thinking it might not work if incompatible with KitKat partitions. I know that a 30 modem used to break all of my ROMs.
As long as you have a 10m or 10r modem handy you could try the LP modems. Go back to 10 if it doesn't work.
I have 20b and 20g up on Mega.

https://mega.nz/#F!WVRWmDII!oeZ17walw3sOi71mDkCKrw

My G3 last had stock Lollipop (via KDZ after it got bricked) so I use 20g modem.


LG G3 D851, AOSPA 7.3.1-EOL ROM, MultiROM, Tapatalk 4.9.5
Click to expand...
Click to collapse

Well I tried to flash the 20b modem on top of a nougat rom and it flashed successfully. Took a while to boot but finally did, but it still shows 10m modem in settings... hmmm
 
marcdw

marcdw

Senior Member
Sep 24, 2014
5,751
2,894
59
Baldwin Park
kinfolk248 said:
Well I tried to flash the 20b modem on top of a nougat rom and it flashed successfully. Took a while to boot but finally did, but it still shows 10m modem in settings... hmmm
Click to expand...
Click to collapse

You referring to the baseband? So it's still 10m. Hmm...
Previously I was on 10r which had a baseband that matched 20 instead of 10m. I wonder if that will work. In a moment I'll upload 10r (both modem and bootstack). Same link.

10c Baseband:
MPSS.DI.2.0.1.c1.13-00009-M8974AAAAANPZM-1

10m Baseband:
MPSS.DI.2.0.1.c1.13-00018-M8974AAAAANPZM-1

20b and 20g:
MPSS.DI.2.0.1.C1 1300053-M8974AAAAANPZM-1


LG G3 D851, PAC-MAN LP ROM, MultiROM, Tapatalk 4.9.5
 
K

kinfolk248

Senior Member
Feb 27, 2010
1,400
178
Jackson, Ms
marcdw said:
You referring to the baseband? So it's still 10m. Hmm...
Previously I was on 10r which had a baseband that matched 20 instead of 10m. I wonder if that will work. In a moment I'll upload 10r (both modem and bootstack). Same link.

10c Baseband:
MPSS.DI.2.0.1.c1.13-00009-M8974AAAAANPZM-1

10m Baseband:
MPSS.DI.2.0.1.c1.13-00018-M8974AAAAANPZM-1

20b and 20g:
MPSS.DI.2.0.1.C1 1300053-M8974AAAAANPZM-1


LG G3 D851, PAC-MAN LP ROM, MultiROM, Tapatalk 4.9.5
Click to expand...
Click to collapse

yea basebands. sorry if i wasnt clear there. I want the new(er) modems to see if i can get better signal. new towers have gone up but signal still sucks lol
 
marcdw

marcdw

Senior Member
Sep 24, 2014
5,751
2,894
59
Baldwin Park
I see. ?
If you try one of the full 10r bootstacks (all have the same content) I remember using the Lanchon one for some reason.



LG G3 D851, PAC-MAN LP ROM, MultiROM, Tapatalk 4.9.5
 
You must log in or register to reply here.

Similar threads

autoprime
[STOCK][5.0.1][20B] LG D851 20B OTA, IMGs, Flashables, KDZ + Custom L Rom [APR.12.15]
Replies
766
Views
173K
bradhoschar
bradhoschar
thecubed
[ROOT / TWRP][D851 ONLY][OSX/Linux/Windows] Root/TWRP your TMO G3 with PurpleDrake!
Replies
1K
Views
460K
checho51
checho51
A
[ROM][OFFICIAL] Resurrection Remix v5.7.4 [d851] [MM][11-20-16]
Replies
2K
Views
333K
A
akshargajjar
A
  • Locked
[ROM][OFFICIAL] Bliss Pop v6.3 [d851][MM][05-24-16][download][ota]
Replies
3K
Views
348K
A
aclegg2011
$droyd$
  • Poll
[ROM]-Lollipop-Illusion-6.5-D851-android5.0.2-[MAR.11]
Replies
2K
Views
205K
shayneflashindaily
shayneflashindaily

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 67
    autoprime
    autoprime
    Pg7TUNH.png


    T-Mobile LG G3 D851 30D​
    This thread covers various methods of installing both stock and stock rooted Marshmallow 6.0 30D onto the T-Mobile LG G3 D851.​
    ​

    Information:
    30D is the first official Marshmallow Android 6 update for the T-Mobile LG G3.
    It was first released in KDZ form the morning of April 27 2016.
    Official update methods include both an OTA update from 20G to 30D and a KDZ update through the LG Mobile Support Tool.
    The bootloader is still unlocked with no sort of OEM Unlock toggle. Still no bootloader/fastboot mode.
    Kingroot can temp-root 30D! At least 1 Marshmallow build will always have root. Not very secure... but good for modders.

    Android Version: 6.0
    Android security patch level: 2016-04-01
    Baseband version: MPSS.DI.2.0.1.c1.13-00114-M8974AAAAANPZM-1.43646.2
    Kernel version: 3.4.0
    Build number: MRA58K
    Software version D85130d
    Security software version: MDF v1.1 Release 2

    Install Directions:
    OTA:
    When the software update is available, the update icon will display in the status bar at the top of the screen.
    Swipe down from the top and tap the notification.
    Restart & Install
    Note: If prompted, connect to a Wi-Fi network to download the software update.

    Your device will restart to perform the update.
    When the update is complete, your phone will restart and transition through a series of alerts stating "Android is upgrading".
    Once your phone has powered on you will be notified that the software update successfully installed. Tap "OK" to close the notification.

    Troubleshooting
    If you have not been notified of an available software update, you can manually check if one is available.
    From the Home Screen, tap Apps > Settings > General Tab > About phone
    System updates > Check now to manually check for a new update.
    You will be prompted if a new software update is available.


    LG Mobile Flash Tool:
    Click here to download the LG Mobile Support Tool to your computer, then open.
    Connect your phone to your PC.
    Tap Start Upgrade within the LG Mobile Support Tool to begin.
    Device will progress through Analysis, Download, Update and Complete during the update process.
    While updating, the device will power off and enter a download mode at 5% completion. This is normal. DO NOT DISCONNECT THE USB CABLE!
    At approx 95% of completion, the device will power on. This may take several minutes. This is normal. DO NOT DISCONNECT THE USB CABLE!
    If your software update stops before it has completed, please do not close the update tool and try the update again. Additional troubleshooting steps are below.

    The tool will notify you when the update is complete. Tap Exit to return to the main screen.
    Wait for device to power on. Once powered on, the device will reconnect to the LG Mobile Support Tool. When connected, observe that the version number reflects the latest Software D85110r. It is now OK to DISCONNECT THE USB CABLE.

    Troubleshooting
    If the phone software upgrade stopped before completion, please do not close the update tool and try to update again following original instructions.
    If you already closed the update tool, and the phone will not turn on normally, please follow the steps below:

    Remove back cover and battery.
    Record IMEI/ESN/MEID from device label in battery well.
    Replace battery and back cover.
    Open LG Mobile Support Tool.
    Connect the device to PC via USB cable.
    From the drop down menu, select Options > Upgrade Recovery.
    Enter your phone information and tap OK
    After checking the phone information, it will start to update automatically. If it does not work, the device may require service to attempt recovery.


    TWRP + Flashable-ZIPs:
    These directions should be used by anyone who already has TWRP installed on their D851.
    I used the latest TWRP 3.0 build @ https://dl.twrp.me/d851/
    Don't want root? Then it's probably easiest to just flash the stock KDZ using LGUP.. or just skip the SuperSu steps.

    1. Download the following 3 files and place them on the internal or external sdcard:
    a. LG-D85130D-Flashable.COMPLETE.zip
    b. LG-D85130D-Flashable.Boot-AUTOREPACK.zip
    c. SuperSU 2.65 or higher. [STABLE] or [BETA] Thanks to Chainfire!​
    2. (re)Boot into TWRP if not there already.
    3.* Backup current partitions: boot, system, data, efs (backing up anything is optional but suggested)
    4.* Up to you if you want to wipe data (TWRP > Wipe > Swipe slider) but not needed if coming from a stock rom.
    5. Install the 3 zip files you put on your sdcard, 1 at a time:
    a. LG-D85130D-Flashable.COMPLETE.zip (Install > select zip > swipe to confirm/flash)
    b. LG-D85130D-Flashable.Boot-AUTOREPACK.zip (Install > select zip > swipe to confirm/flash)
    c. SuperSU zip (Install > select zip > swipe to confirm/flash)​

    After zips finish flashing you can reboot! If TWRP asks if you want to install SU, hit no. If TWRP says No OS installed, ignore it.

    Alternatively, if you are already on 30D already without root and want root/TWRP you can use Kingroot.
    Click the button below to display how-to steps...
    1. Download the latest Kingroot APK here.
    2. Install Kingroot and get temproot with it.
    3. Download TWRP @ https://dl.twrp.me/d851/ and download LG-D85130D-Flashable.Boot-AUTOREPACK.zip linked below.
    4. Enable USB Debugging on your D851 and connect your device to the computer and run the following commands to install TWRP.
    Code: 
    adb push LG-D85130D-Flashable.Boot-AUTOREPACK.zip /sdcard/
adb push twrp-3.0.0-0-d851.img /sdcard/
adb shell
su
dd if=/sdcard/twrp-3.0.0-0-d851.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
reboot recovery
    [if no computer]
    d/l TWRP n Boo Repack onto phone n move it to root of internal storage.
    Run the su, dd and reboot commands above in terminal emulator.
    5.* Backup current partitions: boot, system, data, efs (backing up anything is optional but suggested)
    6.* Up to you if you want to wipe data (TWRP > Wipe > Swipe slider) but not needed if coming from a stock rom.
    7. Install the 2 zip files you put on your sdcard, 1 at a time:
    a. LG-D85130D-Flashable.Boot-AUTOREPACK.zip (Install > select zip > swipe to confirm/flash)
    b. SuperSU zip (Install > select zip > swipe to confirm/flash)​

    Downloads:
    Please do not mirror my files!

    LG-D85130D-Flashable.COMPLETE.zip
    100% stock untouched system, boot, modem and bootloader. Recovery is not included so you don't lose TWRP.

    LG-D85130D-Flashable.Modem.zip
    This is a flashable stock 30D modem.

    LG-D85130D-Flashable.Boot.zip
    This is a flashable stock 30D boot.img. Boot.img contains kernel + dtb + ramdisk.

    LG-D85130D-Flashable.Boot-AUTOREPACK.zip
    This is a repacked boot.img to work properly when flashing SuperSu in TWRP.

    LG-D85130D-Flashable.Bootloader.zip
    This is a flashable stock 30D bootloader. It contains aboot, dbi, factory, laf, rpm, sbl1 and tz.


    Also, KDZ + all stock images for 30D are available in the link below...
    CODEFIRE DIRECTORY
    30D KDZ Mirror Here

    MD5 Sums:
    Click button below to view MD5 for each file...
    MD5 (aboot.img) = 3a984c57cea36f8356f5068cc7cdd4b4
    MD5 (boot.img) = 98bfe8aaeb7e169d78ad249b5c362214
    MD5 (dbi.img) = 1a78fd7454f7d0a6fa1bc71aa15c12e8
    MD5 (factory.img) = 794327b47c4f1cd503591d804ab2a458
    MD5 (laf.img) = 1e5971ef828b0d6afdfa4690efa26308
    MD5 (modem.img) = 3969d7e27ffb83b5873c0ac9c796ea1d
    MD5 (persist.img) = 039a73fb1b36df8cab1c0861cdea6bf3
    MD5 (recovery.img) = 339bd050ddfac269f5c1c7ee36217df3
    MD5 (rpm.img) = e9d136d6a7fcdd3726696a111f4b8f8e
    MD5 (sbl1.img) = c4ec620062aaa2f7ebafa67c43218665
    MD5 (system.img) = f22c8366fab71f65f5f50c7e8eaaa1cd
    MD5 (tz.img) = 36a7d694d17f0f8183c0afb825dc9512
    MD5 (LG-D85130D-Flashable.Boot-AUTOREPACK.zip) = f7f9507a81333f0a4e8a16033018e8b9
    MD5 (LG-D85130D-Flashable.Boot.zip) = ffba4ffc1842c65b1f1defc2dc103330
    MD5 (LG-D85130D-Flashable.Bootloader.zip) = cf37b49ab3b85eba9d0d43c5927d215d
    MD5 (LG-D85130D-Flashable.COMPLETE.zip) = d2cbb2c8675bf0adc412b760c05ceb29
    MD5 (LG-D85130D-Flashable.Modem.zip) = 87b50d33e7b0fba62847a2792648a310
    MD5 (D85130d_00_0404.kdz) = a3d04df6fa1e964bd10b5e2ae59041ae


    DISCUSSION THREAD:
    Take all your nonsense to the marshmallow general thread here - http://forum.xda-developers.com/tmo...-t-mobile-lg-g3-d851-30d-marshmallow-t3367030
    Click to expand...
    Click to collapse

    y u quote OP?

    Follow me on twitter for future updates on LG-related things - twitter.com/@utoprime

    Find this thread helpful? Hit the Thanks button!
    Feeling extra generous? Click my name at the top of any post and hit donate or click here.

    #TEAMCODEFIRE
    View
    3
    marcdw
    marcdw
    @Shady282, yes, that download site is a pain in the arse.
    If Mega is okay the below should be a link to the directory where I have the ROM and AUTOREPACK files.
    Let me know if it works.

    https://mega.nz/#F!vNAFDa5B!FPrkwAMBNaqA0Lf4jQpW2Q


    LG G3 D851, PAC-MAN LP ROM, Nebula 9.1 Kernel, Tapatalk 4.9.5
    View
    3
    autoprime
    autoprime
    uberboyd said:
    I can't seem to use the service menu code I have in the past, do you know the code? I have d9851 using cricket sim in usa. Sorry if this is a dumbass question
    Click to expand...
    Click to collapse

    dumbest question ever.. how dare you!!

    lol nah.. jk.. the code changed once Marshmallow came around.. first showing up on the G4.

    *#546368#*851#
    View
    3
    B
    bluehacker007
    mickeyasamoah said:
    Okay. So you flashed:
    LG-D85130D-Flashable.COMPLETE.zip
    LG-D85130D-Flashable.Boot-AUTOREPACK.zip
    SuperSU zip

    But what about the mm radio (LG-D85130D-Flashable.Modem.zip) did you flash that too??.

    Sorry if am being dumb. I hard bricked my D851 because I failed to read and understand and it cost me a new mobo. So I hope you understand.
    Click to expand...
    Click to collapse

    No worries - I understand. First I wiped data, dalvik, system and cache to get a fresh start. Then I flashed these in the order listed here:
    1. LG-D85130D-Flashable.COMPLETE.zip
    2. LG-D85130D-Flashable.Boot-AUTOREPACK.zip
    3. SuperSU zip

    I actually had to flash the twrp 3.0 image before I did all of that because I was originally on twrp 2.8. Obviously since you're on 3.0 you can skip that step.

    After the flashing was complete I mounted system in TWRP and removed the random bloat that I didn't want from /system/app and /system/priv-app. Then I booted system and kept an eye out for supersu to disappear everytime I rebooted. If it does then just flash 2 and 3 above from TWRP again.

    Here's what I removed from /system/app:
    Code: 
     atfwd
 Books
 ChromeWithBrowser
 CloudPrint
 Drive
 DrmService
 elt_test
 FaceLock
 Gmail2
 GnssAirTest
 GnssLogCat
 GnssPosTest
 GnssTest
 GoogleTTS
 Hangouts
 KeyChain
 LGAccount
 LGDrm
 LGFOTA
 LGPCSuiteUI
 LGSmartcardService
 LGSpringCleaning
 LGWeather
 LGWeatherService
 LGWeatherTheme
 LGWernickeManager
 Maps
 Music2
 NewsstandStub
 PlayGames
 PlusOne
 PrintSpooler
 SmartShare
 SmartShareDLNA
 SmartShareProvider
 talkback
 TMO_VVM
 UnifiedEULA
 Videos
 WfdService
 YouTube

    Here's what I removed from /system/priv-app:
    Code: 
     AdaptClient
 AmazonShopping
 BackupRestoreConfirmation
 BioITPlatform_SDService
 CloudHub
 com.mobitv.client.tmobiletvhd
 ECID-release
 LGActionManager
 LGAlarmClock
 LGApplicationManager
 LGBackup
 LGBrowser
 LGCalendar
 LGConciergeBoard
 LGCover
 LGEasyHome
 LGEmail
 LGFileManager
 LGFormManager
 LGGallery
 LGGestureAnswering
 LGLDB
 LGLIA
 LGLiveWallpapersPicker
 LGLW_MultiPhoto
 LGMapUI
 LGMessage
 LGMusic
 LGMusicWidget
 LGMyGuide
 LGMyWellness
 LGPartnerBookmarksProvider
 LGPCSuite
 LGPrivacylock
 LGSettingsAccessibility
 LGSmartSharePush
 LGTasksProvider
 LGUpdateCenter
 LGVidClip
 LGVideo
 LGVoiceCommand
 LGVoiceCommandService
 LGVoiceRecorder
 LIAInformant
 LIAS4URecommender
 SplitWindowService
 TagGoogle
 TMO_Lookout
 TMO_MyAccount
 WapService
 WiseScreen
    View
    3
    JayDream
    JayDream
    ranmasaotome510 said:
    Quick question... Since i cant find the answer to this... Is it safe to flash other G3 Variant Radio/Modem's on other G3 Variants? For e.g.... Flashing the d851 30D Modem on a d850 that is currently running the 10d d850 modem (Running CM13, and is utilizing T-Mobile Sim{unlocked})
    Click to expand...
    Click to collapse
    No

    Sent from my LG-D851 using XDA-Developers mobile app

    ---------- Post added at 08:14 PM ---------- Previous post was at 08:07 PM ----------
    Bigby2727 said:
    How can I change dpi without getting up crash errors

    Sent from my LG-D851 using XDA-Developers mobile app
    Click to expand...
    Click to collapse
    Xplosed module 'app settings' will correct this.
    coolmen777 said:
    Thanks for this post. Your setup sounds to my ideal config. Currently running SR v6 ROM vased on 20G (5.0.1) rooted with TWRP and xposed with bunch of mods. Can you expend a little on how you went on to install this? Sequence and some details (wiping/resetting/flashing zips) to help someone who likes to be more comfortable before taking a plunge. Does the WiFi calling works for you? Any issues with battery life? Thanks in advance.
    Click to expand...
    Click to collapse
    Sure.
    Note: I am using an mvno, not T-mobile so i am not sure if wifi calling works.
    Battery life is great.

    1. Using d851 twrp 2.8.7.0 I backed up my current setup,backup everything here including modem and whatever else is there. then i transferred a copy of the backup to computer.

    2.Wipe EVERYTHING in recovery;
    System
    Data
    Dalvik
    Cache
    And internal storage just to be completely fresh
    Then i formatted data.

    3. Reboot Recovery ( necessary after formatting)

    4.Transfer the backup you just made, along with all other files that you will need, back to phone storage.

    5. Flash the following according to instructions in O.P. -
    30D complete zip
    Autorepack zip
    And supersu
    Found in the O.P. of this thread

    6. Let device boot normally, login and boot to android.

    7. Delete unwanted apps. There's different methods to do this, a quick Google search will be very revealing. My personal favourite is to download the app 'Rom Toolbox' lite or full.
    Open app, grant root, then tap app manager.
    This will display all user and system apps in a simple list for you to delete at will. Careful here, only delete apps you're sure of. the only tmobile app I left was hotspot app. Note: reboot for changes to take effect.
    (Plz google which system apps are safe to remove)
    Reboot to recovery

    8. Flash xposed v84. Sdk 23 http://forum.xda-developers.com/showthread.php?t=3034811

    9. Flash viper mm 2.4.0.1 for g3
    http://forum.xda-developers.com/showthread.php?p=65229622

    10. Reboot to system make sure everything works
    Xposed
    Viper
    Etc
    - In order for viper to work you will need to dl busybox by Stephen ericsson in play store/ and you will have to dl selinux mode changer and set to permissive http://forum.xda-developers.com/showthread.php?t=2524485

    11. Once you verify xposed and viper are working reboot to recovery.

    12. Factory reset. Yes factory reset (wipe only data, dalvik & cache). Do NOT reboot yet!

    I do this to ensure a clean installation and a fresh setup with all extra mods and flashed apps still intact.This will NOT wipe any system apps or modifications that you have flashed, but it will wipe supersu as it is a "systemless root"

    13. Re-Flash Supersu, then reboot system. (remember to tap "do not install" when twrp asks to install supersu for you)

    1×. There u go, once u are booted up you will have a fresh system with all of your flashed system apps/mods still intact (ie; viper, xposed etc..)

    And all deleted system apps will still be safely out of the picture.

    15. To get wifi hotspot working I used this http://forum.xda-developers.com/showthread.php?p=59858654
    I don't have tmobile service so steps 1-3 of this tether guide worked for me.
    However I believe Tmobile users will have to follow all steps due to tmobile tether restrictions
    .

    Let me know if you have any problems, I have no problem helping someone willing to help themselves and do their own research

    Update: I almost forgot the oversharpening fix
    Version 3.5. Flash this last.
    Found here http://forum.xda-developers.com/showthread.php?p=57144978


    Sent from my LG-D851 using XDA-Developers mobile app
    View

New posts