[STOCK][FASTBOOT][CN|EU|IN] Fastboot Flashable Images For RealMe X2 Pro

Search This thread

killathenoob

Senior Member
Nov 27, 2010
356
85
Hamilton
Just a few helpful hits for people having issues with this. I tried for many hours to get this to work.
Make sure you disable all screen locks before you begin this process, PIN, Facelock, Fingerprint Make sure your DATA partition is not encrypted.
Then reboot Recovery and do a factory reset wipe Data partition also
Then reboot fastboot
Make sure you use CMD prompt and not powershell
Make sure you use latest fastboot its linked in the post.

After I did all that I finally got it to work.
My only issue now is the camera keeps crashing not sure why but I'm going ot try to fix it and I'll report back.
I did the OTA system update and the camera started working again so all good. Only thing is when I did the OTA the phone rebooted back into stock recovery. I had to put Orange Fox back on and do a factory reset then the phone booted back up into the updated software.

---------- Post added at 06:51 PM ---------- Previous post was at 06:48 PM ----------

Followed the exact same steps and now stuck at
IMG-20200829-170444.jpg


I was on android 10 prior this. Now eveything stucks at this. Tried with custom roms also.

I had the same issue it drove me crazy. i had to put Orange Fox recovery on my phone then format the DATA partition to remove the decryption. then I was able to put a custom rom back on.

---------- Post added at 07:48 PM ---------- Previous post was at 06:51 PM ----------

Ok Now I have another issue I have an update to android 10 and color OS 7 but when my phone reboots to do the update it reboots into Orange Fox recovery and doesn't do the update Anyone have any suggestions How I can get this to work?
 
Last edited:

serj-47

Member
Apr 26, 2012
43
4
I have a CN version. During the LOS installation, I cleared the system partition and now the phone always returns to OrangeFOX, I tried a second clean reinstallation of LOS but it does not help. Can I use fastboot to reset my phone to factory firmware? what will happen to the bootloader in this case? it is now unlocked.
 

mike_san

Senior Member
Feb 6, 2013
197
6
Disclaimer :
Code:
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Your warranty will be void if you tamper with any part of your device / software.

Download :
RMX1931_A11_fastboot [CN]

RMX1931EX_A06_fastboot [EU]

RMX1931EX_A09_fastboot [IN]


Fastboot Commands :
Code:
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash system system.img
fastboot flash vbmeta vbmeta.img
fastboot flash vendor vendor.img

Latest Fastboot :
Download

Fastboot Images For Other Realme Devices :
Github

Guide to extract Fastboot images from ozip :

Credits :
jamflux

Regards,
acervenky


I'm with bootloader unlocked but cannot access to bootloader, I get Chinese words that's displays 6 ~ 10, and reboots to system.

Already tried with Auth-Flash, flashed Color OS, and still unable to access bootloader to lock it again.
 

Attachments

  • IMG-20210211-WA0009 (1).jpg
    IMG-20210211-WA0009 (1).jpg
    118 KB · Views: 13
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 8
    Disclaimer :
    Code:
    * I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...). 
    * Your warranty will be void if you tamper with any part of your device / software.

    Download :
    RMX1931_A11_fastboot [CN]

    RMX1931EX_A06_fastboot [EU]

    RMX1931EX_A09_fastboot [IN]


    Fastboot Commands :
    Code:
    fastboot flash boot boot.img
    fastboot flash dtbo dtbo.img
    fastboot flash system system.img
    fastboot flash vbmeta vbmeta.img
    fastboot flash vendor vendor.img

    Latest Fastboot :
    Download

    Fastboot Images For Other Realme Devices :
    Github

    Guide to extract Fastboot images from ozip :

    Credits :
    jamflux

    Regards,
    acervenky
    3
    FAQs

    I'm getting the "The current image (boot/recovery) have been destroyed and can not boot. Please flash the correct image or contact customer service to fix it." Error, what should I do now?
    Flash the vbmeta using this command :
    Code:
    fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img


    I'm getting the "Invalid sparse file format at header magic" Error, does that mean that the images are corrupt?
    No! Just ignore the error, if you get the "Finished" message it means that the image has been flashed without any issues.


    Can I cross-flash images?(CN -> IN & vice versa)
    Some users have reported that the images can't be flashed due to different partition sizes, proceed at your own risk!

    Regards,
    acervenky
    3
    Hello i just spent 4 hours going through everything and always end up stuck!

    First post should be a bit clear Please!

    State if unlocking bootloader is a must!
    State if CN version phones can flash EU version!

    Just to let everyone know i have a CN version phone... i have unlocked my bootloader with the simple steps on realmeroot.com only trick you submit go back to right corner click it all around it will show success and u can follow the rest.... if needed more details let me know.

    After unlocking i flashed each line as stated for the EU when i reach to system.img i have a failed error on 2/6 so it stops and on vendor.img on 2/2 and it stops showing error or the word failed! Then i enter boot loops... to solve this i just flash again everything related to CN version and all is perfectly okay!

    To OP if you need any help testing let me know as i won't be using my phone with CN version its silly point!

    Thank you for your hard work.
    to a fun start with this phone !
    2
    Is it possible to just flash the China X2 Pro with EU /Global rom without unlocking bootloader ?

    No!

    Regards,
    acervenky
    2
    is it possible for you to find realme x2 cn stock image? RMX1911CN is the name of the device. @acervenky
    Yes, which FW version are you looking for?

    Is it possible to just flash the China X2 Pro with EU /Global rom without unlocking bootloader ?
    No, you need to unlock bootloader first!

    Hello Friends.

    I have a CN version phone, all i want is to install the EU version in it. Has anyone successfully installed EU Rom into CN version ? if yes please share your experience with proper procedure and links. Furthermore how can we install EU Rom into a CN version after our boot-loader is unlocked ? Any help will be appreciated.
    Realme has changed the partition sizes for EU and CN variants, which means you can't cross-flash without resizing partitions(which is not recommended)

    Regards,
    acervenky
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone