General Stock Firmware Collection for Nubia Red Magic 8 Pro

[[email protected]]

Wait, is it good for unbricking like MSM Tool on old 1+ (like 7 Pro and so on) even from crashdump mode?

I think it can unbrick your phone if you can use QFIL to flash it. I have not been able to do so using four different PCs, various cables, and various suggestions from internet to fix the error "Sahara fail".

 

[aaa.bbb111222]

I think it can unbrick your phone if you can use QFIL to flash it. I have not been able to do so using four different PCs, various cables, and various suggestions from internet to fix the error "Sahara fail".

"Sahara communication failed", right? I remember having this error them I used windows in VirtualBox. It was tricky to get it working, but in the something worked. AFAIR vol+ and vol- while turned off for 30 seconds, start download in MSM Tool (guess we'll need QFIL/QSPT here, no idea what's the difference), then connect via USB and release volume buttons after it will start downloading.

 

[Adolyer]

I think it can unbrick your phone if you can use QFIL to flash it. I have not been able to do so using four different PCs, various cables, and various suggestions from internet to fix the error "Sahara fail".

Make sure you are in edl mode and see if there is a Qualcomm HS-USB QDLoader 9008 port in the device manager.

the software in this video seems a little easier. There is a link in the description.
but as i said i didn't install full software. The responsibility is entirely yours.

 

[[email protected]]

Make sure you are in edl mode and see if there is a Qualcomm HS-USB QDLoader 9008 port in the device manager.

the software in this video seems a little easier. There is a link in the description.
but as i said i didn't install full software. The responsibility is entirely yours.

My phone has been in edl mode with Qualcomm HS-USB QDLoader 9008 port all the times I tried. I have tried to flash this rom with QFIL almost 100 times using 4 different PCs, two different cables with one from red magic 8 pro and with various suggestions from the internet but I have not been able to flash the rom.

 

[Adolyer]

My phone has been in edl mode with Qualcomm HS-USB QDLoader 9008 port all the times I tried. I have tried to flash this rom with QFIL almost 100 times using 4 different PCs, two different cables with one from red magic 8 pro and with various suggestions from the internet but I have not been able to flash the rom.

If you're using USB 3.0, you can also try 2.0. As an alternative, you can download the software here and put the device in fastbootd mode and flash the v3.18 software with the payload.bin file. Then you can upgrade to v3.19 via OTA.

 

[[email protected]]

If you're using USB 3.0, you can also try 2.0. As an alternative, you can download the software here and put the device in fastbootd and flash the v3.18 software with the payload.bin file. Then you can upgrade to v3.19 via OTA.

I already tried USB 2.0. I can flash v3.18 using sideload. However I have bootloop so I cannot upgrade to V3.19 via OTA. My only hope is to be able to flash V3.19 to boot the phone. I can lock and unlock the bootloader, get into recovery and fastbootd but no matter what I try I can not boot the phone.

 

[Dont_touch7]

I tried various fix from watching youtube without results. If you ever use QFIL to flash this rom, could you please tell me how you did it. Thanks.

I try to flash it but not working , Are you sure its for 4.18?

 

[Adolyer]

I already tried USB 2.0. I can flash v3.18 using sideload. However I have bootloop so I cannot upgrade to V3.19 via OTA. My only hope is to be able to flash V3.19 to boot the phone. I can lock and unlock the bootloader, get into recovery and fastbootd but no matter what I try I can not boot the phone.

Run this code in fastboot mode.
fastboot set-active other
fastboot reboot
Wait for a while like this and see if the device turns on. If it does not open, try flashing the firmware in this way.

 

[[email protected]]

Run this code in fastboot mode.
fastboot set-active other
fastboot reboot
Wait for a while like this and see if the device turns on. If it does not open, try flashing the firmware in this way.

I already tried to flash the firmware in both slots but it does not work.

 

[[email protected]]

I try to flash it but not working , Are you sure its for 4.18?

Adolyer already tested it by flashing the system.img from the rom.

 

[Dont_touch7]

hello please someone help me, I lost my software , not its stuck on fastboot
message is ( your device is corrupt . it cant be trusted...etc
I NEET TO UNBRICK IT

 

[[email protected]]

hello please someone help me, I lost my software , not its stuck on fastboot
message is ( your device is corrupt . it cant be trusted...etc
I NEET TO UNBRICK IT

Run this code in fastboot mode.
fastboot set_active other (not the slash _ in between set and active)
fastboot reboot
You just change to other slot and try to boot the phone. If it does not work you can go to recovery, choose English, when you see Wipe data, then type
adb reboot sideload
when the screen come back with two errors notes in the bottom of the screen then type
adb sideload NX729J-update.zip (the name of your rom) and wait until it is done. If the flash is successful you will have a 2.00 transfer display on the pc. You can then wipe data and wipe data again using the second wipe option. If you are lucky your phone will boot.

 

[Dont_touch7]

Run this code in fastboot mode.
fastboot set_active other (not the slash _ in between set and active)
fastboot reboot
You just change to other slot and try to boot the phone. If it does not work you can go to recovery, choose English, when you see Wipe data, then type
adb reboot sideload
when the screen come back with two errors notes in the bottom of the screen then type
adb sideload NX729J-update.zip (the name of your rom) and wait until it is done. If the flash is successful you will have a 2.00 transfer display on the pc. You can then wipe data and wipe data again using the second wipe option. If you are lucky your phone will boot.

C:\Users\N\Desktop\r>adb sideload NX729J-update.zip
loading: 'NX729J-update.zip'
error: device '(null)' not found


thats a message I got

 

[[email protected]]

C:\Users\N\Desktop\r>adb sideload NX729J-update.zip
loading: 'NX729J-update.zip'
error: device '(null)' not found


thats a message I got

If your boot loader is lock. You cannot use sideload.

 

[Dont_touch7]

If your boot loader is lock. You cannot use sideload.

No it’s unlocked but Im searching about unbrick file for free didnt found it

 

[[email protected]]

No it’s unlocked but Im searching about unbrick file for free didnt found it

You can download V3.19 from post #30. This is the same file you have to pay for the prog_firehose_ddr.elf. You can try to flash with QFIL or miflash.

I attach a text file you can change it to red8n.bat and run it in command window (or you can execute each command one by one) with the same images files obtained from the payload.bin of the rom you want to flash. If you are lucky your phone will boot.

 

[Dont_touch7]

You can download V3.19 from post #30. This is the same file you have to pay for the prog_firehose_ddr.elf. You can try to flash with QFIL or miflash.

I attach a text file you can change it to red8n.bat and run it in command window (or you can execute each command one by one) with the same images files obtained from the payload.bin of the rom you want to flash. If you are lucky your phone will boot.

I will try and keep you in touch , thanks alot bro I appreciate your efforts

 

[Dont_touch7]

Sorry for late, I try bat file didnt solve it , then trying QFIL I got QSaharaServer fail process fail

((

 

[[email protected]]

Sorry for late, I try bat file didnt solve it , then trying QFIL I got QSaharaServer fail process fail

((

Put the image files in a folder at the root directory, for example C:\V319 and in the configuration change the device setting to UFS. If this does not work try the suggestions in the following link:

How to fix Sahara fail error in QFIL - Hovatek Blog

Qualcomm Flash Image Loader (QFIL) is a free tool for flashing Qualcomm-based Android devices. QFIL-flashable firmware come in either Flat

www.hovatek.com

 

[[email protected]]

Try the following firehose: