General Stock Firmware Collection for OnePlus 11

[rockmaster]

This is an problem from phb110 what is flashed with oos


Flash coloros back and you are happy

hi is there a guide on this? trying for couple of hours now but still stuck in bootloop

 

[ChrisFeiveel84]

hi is there a guide on this? trying for couple of hours now but still stuck in bootloop

Can you boot to fastboot/fastbootd
When yes flash the cos full pack (payload.bin) with FBE
And delete all cow partition (when you have this on your op11)

When you can't boot to fastboot/fastbootd your only way msm tool (edl flash )

 

[rockmaster]

Can you boot to fastboot/fastbootd
When yes flash the cos full pack (payload.bin) with FBE
And delete all cow partition (when you have this on your op11)

When you can't boot to fastboot/fastbootd your only way msm tool (edl flash )

Yes I can

so how should I do it? steps as below if you can help to confirm? My device is PHB110
- ColorOS 13 full package 07fc9297eb9b446ab10372a4aa1eda5e.zip https://yun.daxiaamu.com/OnePlus_Roms/一加11/ColorOS 13.0.0 A.10/
- Follow these steps (in https://forum.xda-developers.com/t/...ta-a07-bootloader-relock-pin-working.4546967/)

Step 3:

1. Download and unzip eea73728a1b945ea8e3ff6b628495af5.zip
2. Goto Fastboot Enhance
3. Check "Ignore Unknown Partition"
4. Make sure fastbootd is NO (Phone Screen: The one with Menu and shows SECURE BOOT/DEVICE STATE)
5. Flash payload.bin

Step 4:

1. Boot into fastbootd (Phone Screen: The one with language selection)
2. Goto Fastboot Enhance
3. Check "Ignore Unknown Partition"
4. Make sure fastbootd is YES
5. Flash payload.bin

Step 5:

1. Download and unzip Abandon_PHB110_V13_202301030.zip
2. Unzip make sure radio/oplusstanvbk.img exits
3. Boot into fastbootd (Phone Screen: The one with language selection)
4. Use Fastboot Enhance or command line
5. fastboot flash --slot=all oplusstanvbk radio/oplusstanvbk.img

Step 6:

From @daxiaamu blog post,

1. Go in to OxygenOS, skip all the setup. DO NOT SET THE PIN
2. Go into bootloader again. follow step 2
3. Run $ fastboot flashing lock
4. Again, go in to OxygenOS, skip all the setup. DO NOT SET THE PIN
5. Once passed the setup screen. Goto settings and set the pin

Then boot directly as step 6 and relock bootloader. Do I need to do QLMflasher to unbrick using payloader extracting payload.bin?

Many thanks man, you could save a life today
=======
edit: Hmm I think I will try to follow this first (option1): https://forum.xda-developers.com/t/...ock-oxygenos-firmware-on-oneplus-10r.4465077/
But if you have an answer I'm happy to follow

=======
update: option 1 still gives me bootloop

 

[ChrisFeiveel84]

just like when you convert from cos to oos, just the other way round, from oos to cos

And data is on op11 (idk on china ) with oos f2fs not ext4

 

[rockmaster]

just like when you convert from cos to oos, just the other way round, from oos to cos

And data is on op11 (idk on china ) with oos f2fs not ext4

very generic answer I think mine is hard bricked for real, show qualcom bundle

can still go into fastboot and recovery though, but look like I will need to look for paid services

 

[ChrisFeiveel84]

very generic answer I think mine is hard bricked for real, show qualcom bundle View attachment 5860595
can still go into fastboot and recovery though, but look like I will need to look for paid services

When your op boot only in edl you cam it only fix with edl flash

 

[mark332]

hi is there a guide on this? trying for couple of hours now but still stuck in bootloop

ask oneplus team for remote assist or try online service provider https://romprovider.com/remote-service/

 

[NelsonHun]

Hello!
I would like to ask if anyone has encountered such an error with a Oneplus 11 (Color OS) System.
I was able to download Google Play from an external source, but the google Wear OS.apk does not start, only the Wear OS logo appears but does not continue
and I have a Samsung Galaxy Watch 4 Classic that I can't pair with it.....(It says not compatible)
What could this be?

 

[ryshd296]

Hello!
I would like to ask if anyone has encountered such an error with a Oneplus 11 (Color OS) System.
I was able to download Google Play from an external source, but the google Wear OS.apk does not start, only the Wear OS logo appears but does not continue
and I have a Samsung Galaxy Watch 4 Classic that I can't pair with it.....(It says not compatible)
What could this be?

Wear OS such as Galaxy Watch may not pair with China rom (Coloros).
Incidentally, xiaomi's MIUI (Chinese ROM) also cannot be paired.

 

[Jason_Lim]

• CPH2449 Global A07: eea73728a1b945ea8e3ff6b628495af5.zip
• ColorOS: Abandon_PHB110_V13_202301030.zip (only oplusstanvbk.img needed)

From the link.
Why do i get the different zip folder name ???
and after you extracted the zip file, what do you have??

Color OS 13 A10
07fc9297eb9b446ab10372a4aa1eda5e.zip

07fc9297eb9b446ab10372a4aa1eda5e.zip - 一加手机官方ROM - 一加手机官方ROM下载

本站提供一加全机型ROM下载，包括一加Ace 2V、ACE2、Ace/10R、一加10 Pro、9Pro、9RT、9R、8T、8 Pro、一加8、7T Pro、7T、7Pro等全系一加机型的升级全量包、降级包、9008线刷救砖包等各种官方和原厂ROM，全部资源完全免费，不限速，无需登录

yun.daxiaamu.com

Oxygen OS 13 CPH2449 Global
f9812fcddf0f498db8e3358e674ad460

f6adf39214a4496980d141f18a88bcfc.zip - 一加手机官方ROM - 一加手机官方ROM下载

本站提供一加全机型ROM下载，包括一加Ace 2V、ACE2、Ace/10R、一加10 Pro、9Pro、9RT、9R、8T、8 Pro、一加8、7T Pro、7T、7Pro等全系一加机型的升级全量包、降级包、9008线刷救砖包等各种官方和原厂ROM，全部资源完全免费，不限速，无需登录

yun.daxiaamu.com

 

[Muricann]

Greetings! I coudn't find here the last update for my chinese Oneplus 11 which version is PHB110_11_A.10 Please help me to download OTA package of this version

 

[ChrisFeiveel84]

Greetings! I coudn't find here the last update for my chinese Oneplus 11 which version is PHB110_11_A.10 Please help me to download OTA package of this version

Here you can it download

一加11/ColorOS 13.0.0 A.10 - 一加手机官方ROM - 一加手机官方ROM下载

本站提供一加全机型ROM下载，包括一加Ace 2V、ACE2、Ace/10R、一加10 Pro、9Pro、9RT、9R、8T、8 Pro、一加8、7T Pro、7T、7Pro等全系一加机型的升级全量包、降级包、9008线刷救砖包等各种官方和原厂ROM，全部资源完全免费，不限速，无需登录

yun.daxiaamu.com

 

[Muricann]

Thanks a lot

Here you can it download

一加11/ColorOS 13.0.0 A.10 - 一加手机官方ROM - 一加手机官方ROM下载

本站提供一加全机型ROM下载，包括一加Ace 2V、ACE2、Ace/10R、一加10 Pro、9Pro、9RT、9R、8T、8 Pro、一加8、7T Pro、7T、7Pro等全系一加机型的升级全量包、降级包、9008线刷救砖包等各种官方和原厂ROM，全部资源完全免费，不限速，无需登录

yun.daxiaamu.com

Thank you a lot

 

[pandaman20103]

Can anyone explain how/what to flash the 2451 EDL package? I'm stuck on a bootloop after an OTA from A06 to A08.

I did see that the 2451 package may actually be 2447, would that make a difference?

I followed the root guide to update but it black screen after restarting. I restored images in magisk, OTA'd via system, installed magisk to inactive slot, but from there I rebooted using magisk and the it started bootlooping. Apparently you're supposed to reboot from the system update screen. I can still enter fastboot. Any know how to recover from this point? I've tried booting from both slots A and B neither worked. I've also read about some issues with magisk modules causing bootloop but I'm unable to run ADB commands.

I'm new to OnePlus so I looked up guides for manually flashing on this phone and depending on which (older) phone the guides are specifying different files to flash which are all available in this package.

OP10R - https://forum.xda-developers.com/t/...ock-oxygenos-firmware-on-oneplus-10r.4465077/
OP8 - https://forum.xda-developers.com/t/rom-stock-fastboot-op8-stock-fastboot-roms-for-oneplus-8.4084629/
Nord200 - https://forum.xda-developers.com/t/...le-slot-requires-unlocked-bootloader.4401113/

 

[ChrisFeiveel84]

Can anyone explain how/what to flash the 2451 EDL package? I'm stuck on a bootloop after an OTA from A06 to A08.

I did see that the 2451 package may actually be 2447, would that make a difference?

I followed the root guide to update but it black screen after restarting. I restored images in magisk, OTA'd via system, installed magisk to inactive slot, but from there I rebooted using magisk and the it started bootlooping. Apparently you're supposed to reboot from the system update screen. I can still enter fastboot. Any know how to recover from this point? I've tried booting from both slots A and B neither worked. I've also read about some issues with magisk modules causing bootloop but I'm unable to run ADB commands.

I'm new to OnePlus so I looked up guides for manually flashing on this phone and depending on which (older) phone the guides are specifying different files to flash which are all available in this package.

OP10R - https://forum.xda-developers.com/t/...ock-oxygenos-firmware-on-oneplus-10r.4465077/
OP8 - https://forum.xda-developers.com/t/rom-stock-fastboot-op8-stock-fastboot-roms-for-oneplus-8.4084629/
Nord200 - https://forum.xda-developers.com/t/...le-slot-requires-unlocked-bootloader.4401113/

What for rom you use (india eu/global, na )?
And is your op 11 an china op11 with oos on it

 

[pandaman20103]

What for rom you use (india eu/global, na )?
And is your op 11 an china op11 with oos on it

I have the USA variant of the phone with the stock (rooted) OOS.

edit:
I saw your post on the root thread but I don't think I can flash with FBE since the 2451 doesn't have a payload.bin so I need to flash the files manually.

 

[ChrisFeiveel84]

I have the USA variant of the phone with the stock (rooted) OOS.

edit:
I saw your post on the root thread but I don't think I can flash with FBE since the 2451 doesn't have a payload.bin so I need to flash the files manually.

I have never used the edl pack from op11
I thing im the edl pack is a bat what flashed all images when not
Than you habe to flash all images self

 

[Canuck Knarf]

Can anyone explain how/what to flash the 2451 EDL package? I'm stuck on a bootloop after an OTA from A06 to A08.

I did see that the 2451 package may actually be 2447, would that make a difference?

I followed the root guide to update but it black screen after restarting. I restored images in magisk, OTA'd via system, installed magisk to inactive slot, but from there I rebooted using magisk and the it started bootlooping. Apparently you're supposed to reboot from the system update screen. I can still enter fastboot. Any know how to recover from this point? I've tried booting from both slots A and B neither worked. I've also read about some issues with magisk modules causing bootloop but I'm unable to run ADB commands.

I'm new to OnePlus so I looked up guides for manually flashing on this phone and depending on which (older) phone the guides are specifying different files to flash which are all available in this package.

OP10R - https://forum.xda-developers.com/t/...ock-oxygenos-firmware-on-oneplus-10r.4465077/
OP8 - https://forum.xda-developers.com/t/rom-stock-fastboot-op8-stock-fastboot-roms-for-oneplus-8.4084629/
Nord200 - https://forum.xda-developers.com/t/...le-slot-requires-unlocked-bootloader.4401113/

Have you tried flashing the oplusstanvbk from the Adandon throught fastboot yet..?. This may help you or have you tried Fastboot enchance yet..?

Convert ColorOS to OxygenOS (OFP & OTA | Bootloader reLock & PIN working)

Update: 18th March 2023 **** Give Up **** I got so fedup and decided to goto HK and get my OnePlus 11, a real CPH2449 GLO. Paid and waiting to collect. I will not be update and maintaining this post from now on. Why give up? Minor issue like...

forum.xda-developers.com

 

[pandaman20103]

I have never used the edl pack from op11
I thing im the edl pack is a bat what flashed all images when not
Than you habe to flash all images self

This edl pack does not have a .bat for flashing, only creating a .sig file.
Do you know which images are needed? There are 48 .img files in IMAGES and 47 .img files in RADIO.

Have you tried flashing the oplusstanvbk from the Adandon throught fastboot yet..?

I haven't. Should I try the one in the CPH2451 edl pack? It's dated 1/9/23, 1,905KB
edit: flashing oplusstanvbk from the 2451 edl pack in both slot A and B did not successfully boot.

 

[Canuck Knarf]

This edl pack does not have a .bat for flashing, only creating a .sig file.
Do you know which images are needed? There are 48 .img files in IMAGES and 47 .img files in RADIO.


I haven't. Should I try the one in the CPH2451 edl pack? It's dated 1/9/23, 1,905KB

Well I converted my PHB110 china to the CPH2447 and after i did the update through phone ...Had boot loop . I flashed oplusstanvbk from the Adandon _PHB...Like it says in step 5 .. I could not use the command
" fastboot flash --slot=all oplusstanvbk " but used " fastboot flash oplusstanvbk " . phone booted for me