[Stock Rom] [Odin] [Firmware Packages] Odin Flashable Firmware Packages S6102 & B5510

[TheFixItMan]

Stock Rom Odin Flashable Firmware
For Galaxy Y S6102 And B5510​

What do all the codes mean? Which One Do I Need?
See Here


How To Use Odin
Install samsung usb drivers here

Turn phone off (or pull battery and put back in)
Put your phone into download mode - hold vol down home button then with them held also hold power button
Connect usb cable from phone to pc (use rear usb ports not front ones if you have front usb)
Push vol up to start connection
Open odin 3.07 which you can find by the power of google (other versions may work but thats the one I use)
If odin is connected it will say com then a number is a coloured box under com:id on the left hand side

Only auto reboot and F.reset time shoud be ticked - DO NOT tick anything else!

Put pda in pda
Put modem in phone
Put csc in csc

Start the flashing process
Phone will automatically restart and boot once done

Note if it bootloops just go into recovery and wipe data/reset and restart


If the firmware you want is not listed below try looking on Sammobile
Once you have downloaded the firmware from Sammobile you can use SplitFus2 by Doky in order to split the firmware into pda modem and csc in order to flash via odin - my guide to which can be found Here



Galaxy Y Duos S6102 Firmware

India
S6102_DDMF4_ODDMF4_DDMF4_wipe_by_SplitFUS2

Indonesia, Malaysia, Philippines, Singapore, Vietnam
S6102_DXMD1_OLBMD1_DXMD1_wipe_by_SplitFUS2

Arabic
S6102_JPMA3_OJPMA3_XXMA2_wipe_by_SplitFUS2

European
S6102_XXMC1_XENLC1_XXMA2_wipe_by_SplitFUS2

Galaxy Y Pro B5510

Indonesia, Malaysia, Philippines, Singapore, Vietnam
B5510_DXLF1_OLBLF1_DXLE1_wipe_by_SplitFUS2

Arabic
B5510_JPLI1_OJPLF1_XXLH3_wipe_by_SplitFUS2

European
B5510_XXLK3_OXALK3_XXLK1_wipe_by_SplitFUS2

Credits
Doky for splitfus2

XDA:DevDB Information
Odin Flashable Stock Rom Firmware For S6102 & B5510, ROM for the Samsung Galaxy Y GT-S5360

Contributors
marcussmith2626
ROM OS Version: 2.3.x Gingerbread
ROM Firmware Required: Stock Gingerbread 2.3.6 Firmware
Based On: Stock Firmware

Version Information
Status: Stable

Created 2014-10-31
Last Updated 2014-10-31

 

[skakazim]

Marcus these firmwares are already splitted right? and dude there is no firmware for Pakistan please update the splitted one

 

[TheFixItMan]

Marcus these firmwares are already splitted right? and dude there is no firmware for Pakistan please update the splitted one

yes they are already split


Pakistan firmware is the Arabic firmware - I have just listed regions not every single country

 

[skakazim]

yes they are already split


Pakistan firmware is the Arabic firmware - I have just listed regions not every single country

ok thanks

---------- Post added at 12:16 PM ---------- Previous post was at 12:02 PM ----------

Stock Rom Odin Flashable Firmware
For Galaxy Y S6102 And B5510​

What do all the codes mean? Which One Do I Need?
See Here


How To Use Odin
Install samsung usb drivers here

Turn phone off (or pull battery and put back in)
Put your phone into download mode - hold vol down home button then with them held also hold power button
Connect usb cable from phone to pc (use rear usb ports not front ones if you have front usb)
Push vol up to start connection (if drivers are installed it should say android adb in device manager)
Open odin 3.07 which you can find by the power of google (other versions may work but thats the one I use)
If odin is connected it will say com then a number is a coloured box under com:id on the left hand side

Only auto reboot and F.reset time shoud be ticked - DO NOT tick anything else!

Put pda in pda
Put modem in phone
Put csc in csc

Start the flashing process
Phone will automatically restart and boot once done


If the firmware you want is not listed above try looking on Sammobile
Once you have downloaded the firmware from Sammobile you can use SplitFus2 by Doky in order to split the firmware into pda modem and csc in order to flash via odin - my guide to which can be found Here



Galaxy Y Duos S6102 Firmware







Galaxy Y Pro B5510





Credits
Doky for splitfus2

Mod Edit quote hidden
Dude I followed each and every instruction you gave and I guess the flashing was successful but now it is back on the old same boot loop problem.What should I do? Flash again with the same steps?

 

[TheFixItMan]

ok thanks

---------- Post added at 12:16 PM ---------- Previous post was at 12:02 PM ----------


Dude I followed each and every instruction you gave and I guess the flashing was successful but now it is back on the old same boot loop problem.What should I do? Flash again with the same steps?

go into recovery and wipe/data and restart

else use a different firmware

also dont quote the entire first post no need for it and also please only post in one thread - saves me answering in multiple threads

edit - quote of 1st post hidden

 

[skakazim]

Ok sorry

Sent from my GT-S6102 using XDA Free mobile app

 

[skakazim]

Thank You Marcus for the splitted Stock Firmwares for sgyd!

Sent from my GT-S6102 using XDA Free mobile app

 

[SDR_Muslim_Mo]

XXMA2

HI

by the way ... thank you for this freaking useful thread

i have a lil problem : (old ss from an sd backup)


so i live in morocco but i don't really know what version of XXMA2 was in my phone can u help me

 

[TheFixItMan]

HI

by the way ... thank you for this freaking useful thread

i have a lil problem : (old ss from an sd backup)


so i live in morocco but i don't really know what version of XXMA2 was in my phone can u help me

XX firmware is European so flash European firmware

 

[jurasjo]

I have flashed European firmware for gt-s6102 and I have bootloop. There has been some note about problem with mounting data.

Any ideas what went wrong ?

 

[TheFixItMan]

I have flashed European firmware for gt-s6102 and I have bootloop. There has been some note about problem with mounting data.

Any ideas what went wrong ?

have you gone into recovery and wipe data/reset as per instructions on the first post?

if so you will probably need to also include the pit file if you have done wrong flashing in the past for your phone - you can search for the pit file for your phone and include that in the flashing process

 

[AsherFreakz]

Bootloader

no bootloader file required while flashing via odin ?

 

[TheFixItMan]

no bootloader file required while flashing via odin ?

No - I never include it as it's not needed & if you flash the wrong one you would potentially brick your phone & would require a jtag

All you need for general flashing a new stock rom is pda modem & phone & follow my instructions

 

[ranjanshandilya]

Thanks

Stock Rom Odin Flashable Firmware For Galaxy Y S6102 ........1​

Thanks a lot to bring my dead phone to alive....:good:​

 

[deepu_]

im having "e:cant mount /data" problem....plz help

 

[TheFixItMan]

im having "e:cant mount /data" problem....plz help

You flash this in download mode as per instructions
It will format data so you shouldn't get any errors like that after fishing however you can always manually format data yourself in recovery mode as explained again in the instructions

 

[deepu_]

You flash this in download mode as per instructions
It will format data so you shouldn't get any errors like that after fishing however you can always manually format data yourself in recovery mode as explained again in the instructions

I know how to get into recovery mode...but download mode..?? can u explain how to get into download mode

 

[TheFixItMan]

I know how to get into recovery mode...but download mode..?? can u explain how to get into download mode

This is the kind of post that really annoys me for 2 reasons

1 - you clearly still haven't read the instructions on the first post as it clearly tells you how to get into download mode and gives step by step instructions on how to do everything


2 - even if by some chance after reading the first post which gives you the answer anyway you could of just typed in Google "How to put galaxy y in download mode"



Sorry to make an example of you but people really do need to follow my instructions and actually read the first post fully!

 

[deepu_]

This is the kind of post that really annoys me for 2 reasons

1 - you clearly still haven't read the instructions on the first post as it clearly tells you how to get into download mode and gives step by step instructions on how to do everything


2 - even if by some chance after reading the first post which gives you the answer anyway you could of just typed in Google "How to put galaxy y in download mode"



Sorry to make an example of you but people really do need to follow my instructions and actually read the first post fully!

sorry....and i googled it,but needed some experience advice...

 

[deepu_]

sorry....and i googled it,but needed some experience advice...

Successfully unbricked...!!! thanx a lot