So where i see sgh - s959g change it to sgh-i777 in this whole list in build prop see attachment
Sent from my SGH-S959G using XDA Free mobile app
Sent from my SGH-S959G using XDA Free mobile app
ro.product.model
ro.product.board
ro.product.name
ro.product.device
Those are the ones you need to change.
That's what the scripts in recovery flashable files look for as well as what you're trying to do through mobile odin. Those have to match in order to be successful.
Sent from my SAMSUNG-SGH-I747
ro.product.board
ro.product.name
ro.product.device
Those are the ones you need to change.
That's what the scripts in recovery flashable files look for as well as what you're trying to do through mobile odin. Those have to match in order to be successful.
Sent from my SAMSUNG-SGH-I747
Can you be more specific? What did you do to brick your phone? If it's truly bricked then I would suggest using Odin to return to stock and then Odin in a custom recovery,then flash a Rom
i am in odin mode right now and linked to my laptop i had changed thoughs properties in previous post advice from TheGeekyNimrod i did enter model,name,device and board to sgh-i777 and rebooted and now all it does is come on for a couple sec. on logo screen(which is wrong model and also yellow triangle an then turns off
Flash the stock Odin firmware from the OP. You never mentioned you were stock. Can't change build.prop in pure stock rom. Well not device id anyway
Sent from my GT-N7105 using XDA Premium 4 mobile app
when i turn phone off and turn it back on the logo screen doesnt stay on very long and screen blacks out and phone does not respond at all it does stay turned on when connected to laptop and in odin mode
---------- Post added at 11:33 PM ---------- Previous post was at 11:25 PM ----------
can i use oden3v1.85 in Android + slp
---------- Post added at 11:53 PM ---------- Previous post was at 11:33 PM ----------
what do you mean flash from OP
---------- Post added 5th October 2014 at 12:09 AM ---------- Previous post was 4th October 2014 at 11:53 PM ----------
what do you mean op?
---------- Post added at 12:20 AM ---------- Previous post was at 12:09 AM ----------
hello?
---------- Post added at 11:33 PM ---------- Previous post was at 11:25 PM ----------
can i use oden3v1.85 in Android + slp
---------- Post added at 11:53 PM ---------- Previous post was at 11:33 PM ----------
what do you mean flash from OP
---------- Post added 5th October 2014 at 12:09 AM ---------- Previous post was 4th October 2014 at 11:53 PM ----------
what do you mean op?
---------- Post added at 12:20 AM ---------- Previous post was at 12:09 AM ----------
hello?
Op is "opening page", that is the first page of this thread. Sometimes Op refers to the threads author. just have to pay attention to the context it's used
Yeah, if I had known it was stock I wouldn't't have told you to change the prop. Especially if you didn't have a custom recovery and backup already made.
Sent from my SAMSUNG-SGH-I747
Sent from my SAMSUNG-SGH-I747
Stock firmware from FIRST PAGE
phone off press and hold power down and up and then plug in USB. Follow Odin instructions to flash previously mentioned firmware from the Original Post. After you may need to perform factory reset in stock recovery
Sent from my GT-N7105 using XDA Premium 4 mobile app
So I took the note3 back and got the m8 from att and I love it
Everything with the exception of the camera. The camera may actually be worse but that's the only negative thing I can say about it. Everything else is off the chain. Antutu score broke 46000 outta the box
Recovery with Encryption
Any suggestions?
Thanks in advance...
rogersb11 - I'm running CM10.1.3 stable with encryption on an S959G but none of the recoveries in the op's first post (including PhilZ 6.0.2.7 and TWRP 2.7.1.0 - found in another post) prompt for an encryption password - I would like to be able to backup my data partition through the recovery. I tried flashing Shift 5.0 and it just soft-bricked the phone so I had to reflash CM to get the original kernel back.
Any suggestions?
Thanks in advance...
Well that's because they kernel isn't for pre KK. The recovery itself will work but that doesn't do much good. Give me a day or two and I'll build a JB kernel with a WAY newer philz than 6.0.2.7. I need to update the build but currently it's 6.56.8 I believe. I'm not sure why some of these roms support encryption when I THINK it's also kernel dependant. I'll quote you here when I've got that JB kernel ready
Well technically this is for cm 10.2 but that shouldn't matter. Just went ahead and built. This is completely UNTESTED. I never built for JB, just have what's needed in my repo for stuff just like this
https://www.androidfilehost.com/?fid=95747613655043711
Sent from my SGH-I777 using XDA Premium 4 mobile app
https://www.androidfilehost.com/?fid=95747613655043711
Sent from my SGH-I777 using XDA Premium 4 mobile app
Recovery with Encryption
I would try it with CM 10.2 for you but the nightly build boot-loops on the phone (without even installing Shift).
Thanks for the try! No joy - same result as last time. Installing Shift-JB doesn't have any effect on the recovery (tried to install from CWM/PhilZ/TWRP) - just bricks the OS. Is the OS kernel separate from the recovery kernel or do they both use the same?
I would try it with CM 10.2 for you but the nightly build boot-loops on the phone (without even installing Shift).
Last edited:
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone