I have tried every guide I have came across to get this dell streak 7 to work with no luck.
I received this dell streak 7 from a friend because it would not power up. I purchased a charger on ebay and after plugging it in I only get the three button on the side to light up, the screen stays black. The lights would turn of as soon as I unplug the tablet so I thought it was not charging.
That was 2 weeks ago but lastnight I had it plugged in overnight and now the lights stay lit when unplugged. When I plug into my laptop I get APX mode. After several attempt and different guides to flash, reflash, or install the stock files I have no luck. Specifically I am getting errors in nvflash. I get this
This error occurs when I tried to restore.
I also tried to DJ_Steves roms and received this error
It seems that it is the device and not the files that I have downloaded but I could be wrong. If any of you could point me in the right directions, I would greatly appreciate it.
I received this dell streak 7 from a friend because it would not power up. I purchased a charger on ebay and after plugging it in I only get the three button on the side to light up, the screen stays black. The lights would turn of as soon as I unplug the tablet so I thought it was not charging.
That was 2 weeks ago but lastnight I had it plugged in overnight and now the lights stay lit when unplugged. When I plug into my laptop I get APX mode. After several attempt and different guides to flash, reflash, or install the stock files I have no luck. Specifically I am getting errors in nvflash. I get this
This error occurs when I tried to restore.
Code:
failed executing command 31 NvError 0x12002
command failure: writedeviceraw failed<bad data>
Code:
Creating paartition : BCT
failed executing command 16 NvError 0x12002
command failure: create failed <bad data>
bootloader status: failed to create the partition <code: 10> message: nverror 0x5 <0x1000005> flags: 0
