Stuck in Bootloader

[t.pro]

Hello,

i tried to update my BA with wm6.

after flashing it stuck in bootloader(blue,green,red,white display) with the line "R 1.10.00" and nothing more...

even hard or softreset do nothing.

what can i do?

 

[t.pro]

ok i even try the Stuck at startup method.

that's the output of Multiport TTY Version:

set 14 0
HTCST ÚÈÒHTCEUSB>task 28
DOC_format_HW+
DOCInfoTableinitHW+
Binary0:dwSize=80000
BINFS0:dwSize=0
FAT0:dwSize=1000000
FAT1:dwSize=2BA0000
All:dwSize=3C20000
USB>task 0

it always stuck in blue,green,red,white screen after run multiport tool. what can i do?

------------
i have this problem because of this flashing method:

i entered the grey screen (with serial/usb in first line). then i put my usb connection on and run the rom_update. after it is finished (succesfully) it stuck in the blue, green, red, yello screen! help please...

 

[raymonds]

how did you hard reset?

 

[t.pro]

hello,

i hold down the power-button and at same time put stylis in reset.

 

[raymonds]

hard reset for both WM5 and WM6 is different from the one you're doing. here's the guide...

http://wiki.xda-developers.com/index.php?pagename=BlueAngel_WM5_For_Beginners

good luck!

 

[t.pro]

ok thanks, i have tried this:

i do softreset. whenn the stripes came i push "records and "camera"(media player button because there is no camera)---> nothing happens. it stops with the line R 1.10.00 and the coloured stripes.

i dont knwo what to do.

the bootloader method is running. i hold power and record button while i softreset. but with color screen it wont work.

they is no camera button (it is media-player button) because there is no camera. its an german xda III (blue angel).

the next problem is i dont knwo what os is right now on it. befor flashing it was wm2003 and flashing says it was successfully. i dont know if its wm6 or wm2003!

 

[t.pro]

ok now all is happen...

the xda says nothing. it dont go on, it dont work anymore. no lights when in cradle, nothing.

can i do anything?

 

[jakubd]

1. Take the battery out, wait a moment, put it back, do not turn on. Put in the cradle and try to charge it. Use power connection (from power supply), disconnect USB from the computer for charging. Amber led should turn on.
2. When it will be fully charged (amber LED will turn off) try to turn it on and enter bootloader. Try to downgrade to WM2003. If it works fine, try again to flash WM5 or WM6.

What you did seems to be wrong update (wrong rom, wrong file, not fully flashed). But you still have bootloader, so it should be possbile to flash it. But you need full battery.

 

[t.pro]

What you did seems to be wrong update (wrong rom, wrong file, not fully flashed). But you still have bootloader, so it should be possbile to flash it. But you need full battery.

it was not unlocked befor i flashed with bootloader-method.

i charged the battery in cradle (withoud the blue-angel). the led first went orange, after a while turned green (fully loaded). put it back in BA an nothing happens. then put BA (with battery) in cradle and the led became red.

no action on devide, no feedback, nothing. it wont turn on but led is still working.!?

 

[t.pro]

2. When it will be fully charged (amber LED will turn off) try to turn it on and enter bootloader. Try to downgrade to WM2003. If it works fine, try again to flash WM5 or WM6.

ok i get it. in display is the "USB" & "v2.07". now i can flash. but my problem is the phone is not unlocked yet. what file can i flash now??

 

[jakubd]

This message tells you are in bootloader mode. Now you can perform normal flash - I would propose you to use tested&working rom (WM2003?). If this works fine, try again to upgrade to WM5/WM6.
BTW: if you disconnect USB (take out BA from cradle) it should show Serial instead of USB.

 

[t.pro]

ok big tanks to the forum. i finally get it. wm6 german on blue-angel!

 

[Bla_Bla]

Same thing here... but worst..

My 9090 is stuck at bootlader...

When i try to update, (i press the power, record and reset), it says:

SERIAL (or USB)

DOC VERSION IS ERROR!

v2.08


Any idea???

 

[SilverSamurai]

that's normal...

try to flash/update your BA in that screen.

 

[Ather]

the easy way to go into bootloader mode is to execute a file called Enter Bootloader.exe ..it comes with the rom u download..( well it came with xplodes )

Note:- you have to execute this file directly on your deive not on your desktop PC...and i have only tested this on WM 2003..maybe it will work with wm6 also

 

[Bla_Bla]

that's normal...

try to flash/update your BA in that screen.

I there...

I just updated to BA_TMNL_14200_119_11300_Ship, but only with Maupgrade, couldnt do it with baupgrade...
The problem is that i cant put extended rom, whem i try to upgrade is allways an error... and in the settings i dont have extended rom instaled...

Besides that the batery only last 1hour and the PDA is always freezing... i'm always doing resets...

any idea??

Sorry for my bad english by the way...