Stuck On Boot....Any Help?

[Dust Maker]

I got my Razr Maxx HD on Monday and began playing with it, got it rooted but with no Rom's available yet I had to do some more playing around. I wanted to change the LCD Density to squeeze a bit more on the big screen. I used Rom Toolbox which I still had from my Droid X. I adjusted a couple times and restarted, on my third attempt I meant to set to 250 and accidentily set it to 350 and restarted, now I'm stuck. I booted to recovery and tried a wipe to no avail. Anyone have any ideas for a fix. Should I just bring it back to VZW.

Please help.
Thanks, Shawn

 

[kaktuss77]

hi,

you need flash your phone with RSDLite, and un FULL rom (Wipe).

if you have XT926, this rom is MAYBE for you http://sbf.droid-developers.org/vanquish/VZW_XT926_4.0.4-7.7.1Q-144_VQW_S3-34-25_CFC.xml.zip

use RSDLite 6.0 minimum (6.1.4 is ok)

 

[Schoat333]

How does this tool work? Does it just change the density in the build.prop?

I haven't messed with moto phones that much. Do they let you have adb access while in recovery? If they do, you should be able to adb push a stock build.prop. If not, the RSD way is probably your only option.

 

[Dust Maker]

How does this tool work? Does it just change the density in the build.prop?

I haven't messed with moto phones that much. Do they let you have adb access while in recovery? If they do, you should be able to adb push a stock build.prop. If not, the RSD way is probably your only option.

Thanks for the advice thus far.
Yes it edits the build.prop. I'm not sure whether I would have adb access, I'm assuming even if I did, debug would have been turned off when I did a wipe data/cache. I don't know how to use adb either though.

 

[kaktuss77]

yes try, adb before.

 

[Dust Maker]

yes try, adb before.

Can you give me any insight on how to proceed with adb. I've never used it. You think I should attempt that before doing an SBF?

 

[kaktuss77]

you need Motorola drivers + android sdk.

Give me your skype or talk by PM, i should help you and after do a how to

 

[Dust Maker]

I was able to get it fixed, thank you for all your help, it is greatly appreciated.

 

[kaktuss77]

You have flash a Firmware file with RSD LIte, or push a clean build.prop with adb?