Stuck on Moto

[TabascoTX]

Let me start by saying,this isn't my first rodeo,i've been rooting since the beginning of the G1,but this one has me stumped.

Ive got a Moto Atrix HD, rooted and bootloader unlocked running Batakangs Deodexed stock. It started feeling kinda laggy so I decided to jump into recovery (CWM 6) and delete the Devlik cache Battery stats etc. basically everything but user data so I didn't have to start from scratch. Ive done it in the past and it speed things up considerably with no ill side effects. So I did it thins time and immediately got the "unable to access recovery log/command" error. So I decided to reboot recovery and try it again and the same error came up as soon as it booted into it. I decided to just use rsd and do a complete fresh stock att install,but it wouldn't go to fastboot and rsd didn't see the phone neither did adb.So I tried a full wipe. Didn't work. So idecided to do a rom reinstall and see if that fixed it.nothing. So I tried another wipe and this time it wouldn't boot back into recovery,stays stuck on the first boot screen. I even went through the trouble to remove the back and unscrew the battery and do a battery pull with no luck. During all this I had RSD pulled up and it never saw the phone to give me something to work with. Im kinda stumped on this one,i can normally figure it out without issues,searched here and I didn't see anyone with the same issue exactly. Im open for ideas. Thanks

Updatek so I managed to get PhilzTouch recovery installed,and got Carbon installed. But still getting the error in recovery.Its finally booting at least tho....Finally got to use MythTools to reinstall the recovery and all is fixed..

 

[devilsking]

Let me start by saying,this isn't my first rodeo,i've been rooting since the beginning of the G1,but this one has me stumped.

Ive got a Moto Atrix HD, rooted and bootloader unlocked running Batakangs Deodexed stock. It started feeling kinda laggy so I decided to jump into recovery (CWM 6) and delete the Devlik cache Battery stats etc. basically everything but user data so I didn't have to start from scratch. Ive done it in the past and it speed things up considerably with no ill side effects. So I did it thins time and immediately got the "unable to access recovery log/command" error. So I decided to reboot recovery and try it again and the same error came up as soon as it booted into it. I decided to just use rsd and do a complete fresh stock att install,but it wouldn't go to fastboot and rsd didn't see the phone neither did adb.So I tried a full wipe. Didn't work. So idecided to do a rom reinstall and see if that fixed it.nothing. So I tried another wipe and this time it wouldn't boot back into recovery,stays stuck on the first boot screen. I even went through the trouble to remove the back and unscrew the battery and do a battery pull with no luck. During all this I had RSD pulled up and it never saw the phone to give me something to work with. Im kinda stumped on this one,i can normally figure it out without issues,searched here and I didn't see anyone with the same issue exactly. Im open for ideas. Thanks

Updatek so I managed to get PhilzTouch recovery installed,and got Carbon installed. But still getting the error in recovery.Its finally booting at least tho....Finally got to use MythTools to reinstall the recovery and all is fixed..

I just jumped in and read your post. unfortunately, I had no chance to reply to you after I read the last line But it's nice to know my tools is helpful.