success to hack Technisat MIB2 infotainment system

[nimlyel]

Hello, I have MIB2 STD and basically I want to activate Full link.
HU version is MST2_EU_SE_ZR_P0359T and that device does not have navigation. It has only 1 SD card slot. Device part no 5QA035824A.

I tried to install MIB2 toolbox and some patches but it was not successful. Is there any way to do activation in that device?

Edit, I have learnt it is possible but I need to activate telnet/console for it and to do that I need to solder Hu but I could not find that how to do that. Is there any article or example for it?

I would be happy if someone show me how to do that.

 

[dec123ua]

Hello, I have MIB2 STD and basically I want to activate Full link.
HU version is MST2_EU_SE_ZR_P0359T and that device does not have navigation. It has only 1 SD card slot. Device part no 5QA035824A.

I tried to install MIB2 toolbox and some patches but it was not successful. Is there any way to do activation in that device?

Edit, I have learnt it is possible but I need to activate telnet/console for it and to do that I need to solder Hu but I could not find that how to do that. Is there any article or example for it?

I would be happy if someone show me how to do that.

read EMMC directly before

 

[djkns]

Anyone know how to convert US to EU on 5C0 035 684B unit?

 

[Lols11]

Hi! My MIB2 (PQ preh 5C0035682F) is not booting, it freeze on:

[Info] [tsd.mibstd2.hmi.bootanim.j5] cda: graphics init

Full log: https://pastebin.com/pUxs5u6X
I am not sure if I read the logs correctly. The problem is that the processor does not communicate with eMMC? I am asking for any hint. Thanks!

 

[w1n73rf3ll]

hello have a mib std2 pq+nav ... i want to install it on a jetta 2013 this radio was remove it from crashed jetta 2017 i need cp remove it and help with the retrofit im able to donate to someone that can help me

 

[Lols11]

hello have a mib std2 pq+nav ... i want to install it on a jetta 2013 this radio was remove it from crashed jetta 2017 i need cp remove it and help with the retrofit im able to donate to someone that can help me

Check mibwiki and telegram channel. You will get help faster there.

 

[diag01]

HELLO
I need help to fixe my mst2 pq unite not starte black scren
big thanks

 

[lucacloch]

CIAO,

ho la prossima domanda che provo ad attivare SWaP/FEC, ma senza attivazione riuscita. CP_OFF funziona correttamente, ma SWaP/FEC no.

1) Lo provo anche con toolbox 8.3, GEM 4.11t e 4.3. Scarica SWAP su SD, patchalo su PC con SWaPPatcher.exe, quindi ricaricalo da SD su unità con toolbox. Niente è cambiato. Lo stesso provo con FEC e signed_exception_list.txt.

2) Lo provo con patch per 478T, per la prima volta con la versione scaricata, la prossima volta con patched swap.

Dove può essere problema? Anch'io ho ODIS, mesi fa lo faccio con ODIS, ma ora non riesco a connettermi a VAS da VMware tramite bluetooth, ce l'ho su sistema base Windows 11. Quindi l'ho provato senza ODIS.

Grazie!

EDIT: l'ho fatto con ODIS, ma se qualcuno può rispondere, può aiutare altri utenti, forse

Hai risolto?

 

[swenak]

As I wrote, solved with ODIS (unlocked with sending SWAP codes, that I generated on other app). VCDS can do it too (hidden functionality) and VCP can do it too.

 

[lucacloch]

У меня одис, можешь дать инструкцию как это сделать?

 

[swenak]

Try https://mibsolution.one , I mean, that on that page is all what you need.

 

[lucacloch]

здесь не процедура, чтобы сделать с odis

 

[swenak]

Procedure for entering FeC/SWaP codes with ODIS-E....

1. Start ODIS-E and enter 5F Information Electronics
2. On the menu to the right, go to 009-Diagnostic Session, select 'End of assembly line mode (EOL)' and click 'Perform'
3. On the menu to the right, go to 007-Adaptation, scroll down to 'Transfer of release code for a SWaP function' and enter the hexadecimal code in the 4th column in yellow ('Entry'), then click Apply
4. On the menu to the right, to go 005-Basic Setting, select 'Activation of a SWaP function', don't enter any data, and click the next arrow 3 times.
5. Click the green arrow at the top (you can see it in my photo above) and the code is now entered. Repeat 3-5 for any further codes

 

[lucacloch]

где найти коды подкачки?

 

[swenak]

On that page is generator, or try google.

 

[lucacloch]

Я смотрел на странице mibsolution, в какой папке я могу найти эти инструкции?

 

[PeterB79]

Hello, i have a MIB STD2 PQ Unit and after updating the firmware, the device is in a boot loop.
I tried Emergency Update but it does not load and i got error messages. Do any of you know these messages? Unable to start "/sbin/devc-pty" or Unable to access /dev/name/gns_client? Any Idea?

Spoiler

 

[electro_bordeaux1]

Hello to all members
I have a MIB2 STD2 ZR plus navi car radio that is stuck on the vw logo
is there an update to this post?
and thank you

 

[electro_bordeaux1]

Hello to all members
I have a MIB2 STD2 ZR plus navi car radio which is stuck on the vw logo but all the buttons work and when I unplug the whole thing and plug it back in the screen works for almost a minute then it crashes on the logo and me you can change the stations using the buttons except that the screen remains fixed on the vw logo
my question how to recover the system and the necessary tools?
and thank you

 

[dizzy2604]

Try this, it is not my work, so, thanks to authors.

Hello there, I succesfully patched my 3Q0035842B unit, olii toolbox is installed, radio with all required functionality is working. only think which is disturbing me is 15360768 error from 5F and 19 cluster. ok it's a cosmetic issue but here in the technisat solution document I found a mention of the eeprom content where the vin information could be corrected. Has anyone got this sorted out? can you point me in the right direction? Thank you

Try this, it is not my work, so, thanks to authors.