![[NUT]](/data/avatars/s/4904/4904057.jpg?1600603615){kind=avatar}
ndrutils doesn't work on into twrp, but it could get into phil recovery. However the keys work now after I reinstalled ndrutils from play store. I removed that after I installed your recovery. Why do we need ndrutils now?
You don't but you might be using an older version?
What XZDR beta version did you install?
Can you try to remove the xzdr.prop file from the xzdualrecovery folder and see if that fixes it?
A quick update, as the project has reached the stable phase:
XZDualRecovery 2.8.1-RELEASE is available from the downloads page! :victory:
XZDualRecovery 2.8.1-RELEASE is available from the downloads page! :victory:
I installed this and i can't install ROMs on my Pollux_Windy because it says the device is Pollux, Help?
Yah... that is something I might want to change in the future... ahem...
Anyway, if you want to install CM/AOSP rom's, please use the kernel provided with it to boot to the recovery to use for this. XZDR was never meant to be used for flashing non-stock-based ROM's.
Got the same message - but i have the pollux and i get the error that my device is not the " " or not the pollux. was wondering what the problem is..
made you a little video you can use in your OP if you like Dual Recovery install video-=[XZDualRecovery]=-
PhilZ Touch & CWM & TWRP
*** For Locked and Unlocked BOOTLOADERS! ***
Welcome to the Xperia Tablet Z Questions & Answers thread!
I proudly present you the first and only DUAL RECOVERY for locked boot loaders on our lovely Xperia phones!
If you have an unlocked bootloader and chose to keep the STOCK Sony kernel, you can also use this MOD.
Currently supported XPERIA models:
These are also links to the device specific Q&A threads.
Xperia Z: SO-02E, C6602, C6603, C6606, C6616
Xperia ZL: C6502, C6503, C6506
Xperia Tablet Z: SO-03E, SGP311, SGP312, SGP321, SGP351
Xperia Z Ultra: C6802, C6806, C6833, C6843
Xperia Z1: C6902, C6903, C6906, C6943, C6916
Xperia Z1 Compact: D5502, D5503, D5506
Xperia Z2: D6502, D6503, D6506, D6543, D6563
Xperia Tablet Z2: SGP511, SGP512, SGP521, SGP551, SGP561
Xperia ZR: C5602, C5603, C5606
Xperia T, TX, TL and V: LT30p, LT29, LT30at, LT25i
Xperia S: LT26i
Xperia SP: C5302, C5303
Xperia T2 Ultra: D5303, D5322
Xperia Z3: D6603, D6633, D6643, D6653, D6616
Xperia Z3 Compact: D5803, D5833
Xperia Tablet Z3 Compact: SGP621, SGP641, SGP651
To follow development, be sure to check the DevDB thread!
My LED goes red on starting , not green . I have tried to reinstall but it is the same just wont go in. Any help appreciated
Grab the logs from either cache or sdcard1. Without them I can't help.
The log file on the SD was 0 bytes
This is the one from the cache.
The recovery was working last time I tried a year ago, but tried yesterday to get in and just goes red on LED
I tried pulling the latest version down and installing. I have SuperSU installed , so tried that version, but when that did not work I tried the other ones
If I try use NDR Utils I get a triangle with a spanner briefly
This is the one from the cache.
The recovery was working last time I tried a year ago, but tried yesterday to get in and just goes red on LED
I tried pulling the latest version down and installing. I have SuperSU installed , so tried that version, but when that did not work I tried the other ones
If I try use NDR Utils I get a triangle with a spanner briefly
Ah OK, if I remove the SD Card the LED is green and I can get into Recovery, if the SD card is in I can't get in and LED is RED
Is there something I need on the SD card to get it to go in while SD card is in?
---------- Post added at 08:30 AM ---------- Previous post was at 08:13 AM ----------
OK ...all working now
I will tell you what happened. Yesterday I told tablet to shutdown and left for work. When I got home the battery was dead, so I placed on the charger. After 20 mins I notice the tablet was in a boot loop... it would not power off just came back on in boot loop sequence, nothing I could do would get it to boot. I read the 1st post here about the donotrun file, so I added one. This gave me the ability to get out of the boot loop and power down if required! I thought all was sorted. Then I tried to get into recovery, and I had the RED led not allowing me. I tried installing the new version , but still the same (SD card in with donotrun file) This morning after ejecting the SD, I can get into recovery. placing the sd card in (with donotrun file present) I cannot get into recovery. I renamed the donotrun to donotrun1 and now I can get into recovery. The tablet will now also power down without the boot loop... so I think I am all sorted.... just unsure why I had the boot loop in the 1st place?
Is there something I need on the SD card to get it to go in while SD card is in?
---------- Post added at 08:30 AM ---------- Previous post was at 08:13 AM ----------
OK ...all working now
I will tell you what happened. Yesterday I told tablet to shutdown and left for work. When I got home the battery was dead, so I placed on the charger. After 20 mins I notice the tablet was in a boot loop... it would not power off just came back on in boot loop sequence, nothing I could do would get it to boot. I read the 1st post here about the donotrun file, so I added one. This gave me the ability to get out of the boot loop and power down if required! I thought all was sorted. Then I tried to get into recovery, and I had the RED led not allowing me. I tried installing the new version , but still the same (SD card in with donotrun file) This morning after ejecting the SD, I can get into recovery. placing the sd card in (with donotrun file present) I cannot get into recovery. I renamed the donotrun to donotrun1 and now I can get into recovery. The tablet will now also power down without the boot loop... so I think I am all sorted.... just unsure why I had the boot loop in the 1st place?
lol... nice
You might have a broken/defective /system/bin/chargemon.stock file there. This is (or should be) the stock sony binary, which is supposed to hold the boot process when connecting the device to the charger in an off state. Removing this file will break your offline charging capabilities (the device then will just start up when a charger gets connected), if it gets damaged or replaced it can cause a kernel panic, which in turn explains the boot loop (as a kernel panic will always cause a reboot).
is a version soon coming, who will support Lolipop? :=)lol... nice
You might have a broken/defective /system/bin/chargemon.stock file there. This is (or should be) the stock sony binary, which is supposed to hold the boot process when connecting the device to the charger in an off state. Removing this file will break your offline charging capabilities (the device then will just start up when a charger gets connected), if it gets damaged or replaced it can cause a kernel panic, which in turn explains the boot loop (as a kernel panic will always cause a reboot).
Thanks for v17
Installattion of v2.5.17 seems to fail for me with no error, but I am unable to flash anything as recovery cannot write to system?
Getting similar output as well. Hopefully it can/will be resolved soon.Thanks for v17
Installattion of v2.5.17 seems to fail for me with no error, but I am unable to flash anything as recovery cannot write to system?
Just noticed that [NUT] had posted a new version .18 will try that and see if this works. Report back later.
Last edited:
2.8.18 with patched byeselinux.ko module from this post http://forum.xda-developers.com/showpost.php?p=61397400&postcount=5510 is working !
New posts
-
New phone unresponsive (hardware issue?)
- Latest: Lachlan McKenzie
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone