Tank Xtreme Pro RR 5.8.5--AICP 12-- DOTos [ports]

[mrmazak]

RR 5.8.5 Is finally a working ROM, on tank extreme Pro.
now updated to RR 5.8.8

Link in download Tab.



AICP 12.1 Is available now as daily use ROM

and

DOTos V1.2 Is also up and running


Updated 2-12-2019

All three roms have listed as original builder as Iodine (Originally For device MOTO E4- WOODS)

Installer script gives credits to builders involved. Also Credits are listed here

Credits:
lopestom
Eduard/Хрыч43
hyperion70
Chipa76
HakerSEVA®
iodine71 - 4PDA





XDA:DevDB Information
[port] Blu Tank Xtreme Pro Custom ROMS, ROM for all devices (see above for details)

Contributors
mrmazak, lopestom, Eduard/Хрыч43, hyperion70, Chipa76, HakerSEVA®, iodine71 - 4PDA
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x

Version Information
Status: Testing

Created 2017-12-08
Last Updated 2019-02-12

 

[vampirefo]

Initial announcement thread for a ported rom in progress

W.I.P.

So far cant really even call it a rom. It boots but has no network, no speaker, so sim card(no phone)


A true project that needs work.

work in progress file for anybody willing and able to move project forward
https://www.androidfilehost.com/?fid=817906626617951390

Same positon in port for

AICP 12 boots with network and sims but not other hardware (speaker, camera, )
https://www.androidfilehost.com/?fid=745849072291693626

and

DOTos boots to the boot animation but does not pass this point.



XDA:DevDB Information
[port] Blu Tank Xtreme Pro Custom ROMS, ROM for all devices (see above for details)

Contributors
mrmazak, lopestom
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x

Version Information
Status: Testing

Created 2017-12-08
Last Updated 2017-12-09

What device are these ROMs from? Do you have link to original ROM?

 

[mrmazak]

What device are these ROMs from? Do you have link to original ROM?

They are all from code name "woods"

Moto e4

All from here
https://forum.xda-developers.com/moto-e4/development

In the source rom boot.img
The fstab has 2 data partitions listed one ext4 and one f2fs
I commented one the f2sf

And there was also a /persist partition listed I had to comment that out as well to get them to boot.

 

[vampirefo]

They are all from code name "woods"

Moto e4

All from here
https://forum.xda-developers.com/moto-e4/development

In the source rom boot.img
The fstab has 2 data partitions listed one ext4 and one f2fs
I commented one the f2sf

And there was also a /persist partition listed I had to comment that out as well to get them to boot.

Sounds great, gives me something to look at, while waiting for phone to arrive.

Sent from my blu Life_One_X2_Mini LineageOS 13 Tapatalk

---------- Post added at 09:32 PM ---------- Previous post was at 09:16 PM ----------

Sounds great, gives me something to look at, while waiting for phone to arrive.

Sent from my blu Life_One_X2_Mini LineageOS 13 Tapatalk

OK, I did a quick look, it should run my lineageos 14 for blu life max, they appear to be the same hardware.

Sent from my blu Life_One_X2_Mini LineageOS 13 Tapatalk

 

[mrmazak]

Sounds great, gives me something to look at, while waiting for phone to arrive.

Sent from my blu Life_One_X2_Mini LineageOS 13 Tapatalk

---------- Post added at 09:32 PM ---------- Previous post was at 09:16 PM ----------

OK, I did a quick look, it should run my lineageos 14 for blu life max, they appear to be the same hardware.

Sent from my blu Life_One_X2_Mini LineageOS 13 Tapatalk

I have started to try and use a different source for porting roms to the Tank Pro.

I needed less modification to get them to boot. But still have trouble with getting IMEI and speaker to work

changed only
1. kernel
2. /system/usr/keylayout
3. /system/vendor/firmware
4. edit line in build prop "qemu.hw.mainkeys=1"

https://forum.xda-developers.com/an...nt-support-t3607222/post72362003#post72362003

 

[vampirefo]

I have started to try and use a different source for porting roms to the Tank Pro.

I needed less modification to get them to boot. But still have trouble with getting IMEI and speaker to work

changed only
1. kernel
2. /system/usr/keylayout
3. /system/vendor/firmware
4. edit line in build prop "qemu.hw.mainkeys=1"

https://forum.xda-developers.com/an...nt-support-t3607222/post72362003#post72362003

I have requested kernel Source code for this phone, was told it could take up to 30 business days for code to be uploaded.

Sent from my Tank Xtreme Pro using Tapatalk

 

[mrmazak]

I have requested kernel Source code for this phone, was told it could take up to 30 business days for code to be uploaded.

Sent from my Tank Xtreme Pro using Tapatalk

Hope it is not take that long. I requested also when I received my phone a over a month ago.

 

[vampirefo]

Hope it is not take that long. I requested also when I received my phone a over a month ago.

Here is from Blu.

Hello,

*

Thank you for contacting*BLU Products. We*are happy to help you!

*

We have sent the request to our software department. It will take between 15-30*business*days to have to code added. We recommend re-checking after the time period.*



Should you have any additional questions please contact us at 1-877-602-8762 (Monday-Friday 9:30am-10:30pm EST).

*

Thank you for choosing BLU!




Sent from my Tank Xtreme Pro using Tapatalk

 

[mrmazak]

Here is from Blu.

Hello,

*

Thank you for contacting*BLU Products. We*are happy to help you!

*

We have sent the request to our software department. It will take between 15-30*business*days to have to code added. We recommend re-checking after the time period.*



Should you have any additional questions please contact us at 1-877-602-8762 (Monday-Friday 9:30am-10:30pm EST).

*

Thank you for choosing BLU!




Sent from my Tank Xtreme Pro using Tapatalk

Yes October 31, I for got same response.

 

[mrmazak]

This appears to possibly be a clone hardware device.
http://hammerphones.com/produkty/hammer-energy-2/

Edit:

Phone is close but not full clone.
Touchscreen is different
one of the cameras is different
main speaker is different.

I found this phones stock rom and tried its kernel on the tank, It did not boot.


not that is helps since I find its kernel to not work for us, here is link to the thread (in polish) that has the stock ROM

https://androidforum.cz/myphone-hammer-energy-80923

 

[vampirefo]

This appears to possibly be a clone hardware device.
http://hammerphones.com/produkty/hammer-energy-2/

Edit:

Phone is close but not full clone.
Touchscreen is different
one of the cameras is different
main speaker is different.

I found this phones stock rom and tried its kernel on the tank, It did not boot.


not that is helps since I find its kernel to not work for us, here is link to the thread (in polish) that has the stock ROM

https://androidforum.cz/myphone-hammer-energy-80923

This phone is Android 6 not Android 7, so unlikely the kernel or ROM would work on our tank.

Sent from my Tank Xtreme Pro using Tapatalk

 

[mrmazak]

This phone is Android 6 not Android 7, so unlikely the kernel or ROM would work on our tank.

Sent from my Tank Xtreme Pro using Tapatalk

Sorry, forgot to mention. The phone is listed as shipped with Android 6 (freeme os 6), and received ota to Android 7 (freeme os 7)

 

[vampirefo]

Sorry, forgot to mention. The phone is listed as shipped with Android 6 (freeme os 6), and received ota to Android 7 (freeme os 7)

So you have the Android 7 kernel and firmware?

Sent from my Tank Xtreme Pro using Tapatalk

 

[mrmazak]

So you have the Android 7 kernel and firmware?

Sent from my Tank Xtreme Pro using Tapatalk

yes
it is on this link
https://mega.nz/#F!IfIhSKob!ZXBzdQs6Yy-AnLdGPej29g

and attached here is the build.prop

Device info HW shows these two other devices with same Audio hardware/ driver "i2c_tfa9890"

http://deviceinfohw.ru/devices/uplo...rand=brand0&filter= i2c_tfa9890&submit=Search

 

[mrmazak]

I have requested kernel Source code for this phone, was told it could take up to 30 business days for code to be uploaded.

Sent from my Tank Xtreme Pro using Tapatalk

Followed up with blu again, about sources. I told them it has been over the stated 30 days,
they responded with the following statement

Thank you for contacting BLU Products. We are happy to help you!
 
Please note a formal request has been placed for the information requested. Please contact us back within 48-72 hours to have an answer regarding this matter. We apologize for any inconvenience.

and on the ftp site there is now a folder for "Tank Xtreme Pro" but the folder is empty right now .

 

[vampirefo]

Followed up with blu again, about sources. I told them it has been over the stated 30 days,
they responded with the following statement

Thank you for contacting BLU Products. We are happy to help you!
 
Please note a formal request has been placed for the information requested. Please contact us back within 48-72 hours to have an answer regarding this matter. We apologize for any inconvenience.

and on the ftp site there is now a folder for "Tank Xtreme Pro" but the folder is empty right now .

It's available now on their ftp server.

 

[mrmazak]

It's available now on their ftp server.

Right off the bat, I keep getting make errors just trying to "make mrproper"

missing files, missing folders,

 

[vampirefo]

Right off the bat, I keep getting make errors just trying to "make mrproper"

missing files, missing folders,

Maybe, source is incomplete downloading soon.


Sent from my Tank Xtreme Pro using Tapatalk

 

[mrmazak]

Maybe, source is incomplete downloading soon.


Sent from my Tank Xtreme Pro using Tapatalk

I have gotten past the "make mrproper" errors by back-tracing the errors, and found references to "obj" include lines in 3 make files that point to files that are not in the source. I commented (#) out the lines and got build to start. But again ran into an issue. A missing "lcm-list.o" file. And if I comment that reference out build continues and seemed like it would complete, but failed when build looked for the resulting lcm list that had not been made.


My edits are probably wrong but here is what I have done so far;

1. /drivers/input/fingerprint/Makefile
comment out line #9
"obj-$(CONFIG_MTK_SUNWAVECORP_TEE) += sunwavecorp_tee/"

2. /drivers/misc/mediatek/base/power/Makefile
comment out line #39
"obj-$(CONFIG_MT2701_DCM) += mt2701_dcm/"

3. /drivers/misc/mediatek/Makefile
comment out line #92
"obj-$(CONFIG_MTK_SM100) += tc1_interface/vib_drv/"

Those changes allow build to start, still looking at LCM driver build error

 

[mrmazak]

I have been trying to use the "fq5c_defconfig" based on the build_flavor in stock build.prop.

But I also found those two "almost" clone type devices "Nomu S20" and "myphone Hamer Energy" , both of which also have "fq5c" in there build_flavor. Neither of those kernels boot in the Tank.

So my question is, How to know which defconfig to use?