General [TB132FU-Mediatek Kompanio 1300T] Discussion Firmware/ROM for Xiaoxin Pad Pro 2022

[Fatperman]

I'm sorry. You need to understand what this error means and how to fix it. I hope someone can deal with this.

it wasn't your fault, You do the best for community, don't worry.

 

[vitiosing]

Thank you so much Mr VITIOSING!


The serial number on the unit has changed, I believe it is the serial number of Mr vitiosing's ROM. It was identical to the video he uploaded.

I didn't think about that. You'd better not burn this ROM. I will delete it on MEGA. I don’t know if it will be possible to restore the serial number and whether it will affect in the future. The problem may arise if you flash the Chinese firmware, and then try to update via OTA. Although everything may be fine, but it's better not to take risks.
However, if you continue to install customs firmwares, there will be no problems.

 

[vitiosing]

Even with the use of the tool supplied with the LMSA, the power supply no longer comes on after the flash is completed.
I don't know anymore if it is a region lock or if there is a mistake in the process.
It may not be a good idea to run it if you are using a tablet that is currently working properly.
Please think carefully when executing.

I was able to unlock the boot loader, so I will try various things to see if GSI works.

Try pressing the power button for 21 seconds it's like you pulled out and put the battery on
This works if the tablet after the firmware does not respond at all to pressing the power button
If I understood the problem correctly

 

[vitiosing]

It is best for everyone to make their own backup from their tablet before any firmware, then everything will be restored correctly.

 

[reticuli]

Thank you so much Mr VITIOSING!

Successfully as shown in the attached image.
However, on my ex-China ROM tablet, it no longer turns on and will not start. It is now back to power on using LMSA.

The serial number on the unit has changed, I believe it is the serial number of Mr vitiosing's ROM. It was identical to the video he uploaded.

I used the tool TB132FU_FRP. I don't know if this is the cause of the inability to boot. It could be related to the region lock.

It is difficult to provide reliable information because I obtained and ran various tools from the internet.
MinimalBy_v0.2a did not work in my windows 10 environment.

I used Python and ran the following
python mtk e metadata,userdata,md_udc
python mtk da seccfg unlock

I got an error with mtkclient, so I changed the Loader to MTK_AllInOne_DA_onyx_signed.bin and ran it, and the process completed, although I got an error on the way.

This may not be necessary if you have already unlocked the bootloader.
python mtk e metadata,userdata,md_udc will not boot the bootloader or fastboot.

I was now able to flash using a bypass tool I got from the internet.
I don't know if this works on other people's tablets, but please be careful.
And there is the matter of the serial number, Mr Vitiosing, is that OK?

I am currently flashing it with the LMSA tool. It takes about 60 minutes.
I also translate it at DeepL. I'm sorry if there are parts I don't understand.

Translated with www.DeepL.com/Translator (free version)

How did you change to MTK_AllInOne_DA_onyx_signed.bin loader in mtkclient? Can you make a guide. Thank you.
Maybe someone can make a full backup with these command "python mtk rl out" and share files.

 

[daybreak7456]

How did you change to MTK_AllInOne_DA_onyx_signed.bin loader in mtkclient? Can you make a guide. Thank you.
Maybe someone can make a full backup with these command "python mtk rl out" and share files.

With Python installed on a windows 10 PC.
Python\Python311\mtkclient\Loader.
DA.bin file replaced with only one MTK_AllInOne_DA_onyx_signed.bin

 

[daybreak7456]

The mtkclient finishes the process by replacing the DA.bin file, but the log shows an error on the way. I don't know if this method is correct.

Also, after flashing ROM_1 and not starting, I did various long presses of the power button and volume button, but it did not start. There was a time when the vibration moved for a moment, but the screen did not turn on once.

 

[reticuli]

With Python installed on a windows 10 PC.
Python\Python311\mtkclient\Loader.
DA.bin file replaced with only one MTK_AllInOne_DA_onyx_signed.bin

But you managed to unlock the bootloader? Would be good to be able to unlock the bootloader.

 

[daitalos]

__ For those who haven't seen it, I'm uploading the link again (it's for MTK devices & the tools of these devices etc)

__ A list of errors related to "MTK" tools (SPFT) is here, try to find the error you are interested in :

[Also, in this thread you can find gathered all the useful tools, guides, drivers, and solutions, only for "MTK" devices!]
https://forum.xda-developers.com/t/...pollo-lite-mtk-6797-how-to-use-links.3834946/
__ I hope that some "MTK" users can find help on this thread without having to waste time searching through various sites of dubious quality and risk..

List of sp flash tool error codes, meanings & how to fix (solution)​

Smart Phone Flash Tool also known as SP Flash Tool is a Desktop application used to flash firmware to Mediatek (MTK) Android devices. Its a pretty easy tool to use but you're bound to encounter one er

www.hovatek.com

(Also,read & here : ERROR : Status_brom_cmd_send_da_fail (0xC0060003)
https://forum.xda-developers.com/t/brom-error-status_brom_cmd_send_da_fail-0xc0060003.3707811/ )

 

[vitiosing]

Specialists please advise. If you do the formatting and then flash the official firmware, the tablet should boot? The fact that the serial number will disappear it is clear. But can it be that the tablet does not boot after this procedure?

 

[vitiosing]

Don't do that guys. Hardly recovered from that (I did a format) but congratulations, I have joined the club of those who can not boot. The tablet requires Chinese firmware. Waiting with you. By the way restore with ROM1 error - Status sec write data not allowed 0xC002000C )))))))

 

[daybreak7456]

Open proinfo.bin in the data backed up with python mtk rl with HxD to see the serial number.
It is not known if this can be rewritten and used to change the serial number.

 

[vitiosing]

Even with the use of the tool supplied with the LMSA, the power supply no longer comes on after the flash is completed.
I don't know anymore if it is a region lock or if there is a mistake in the process.
It may not be a good idea to run it if you are using a tablet that is currently working properly.
Please think carefully when executing.

I was able to unlock the boot loader, so I will try various things to see if GSI works.

Maybe what I did will help you. After formatting in SPFT my tablet died, it stopped responding to the power button. Trying to flash through SPFT gave me an error. I used files from Lenovo TB132FU_FRP (Factory) - MTK_AllInOne_DA_onyx_signed.bin and auth_sv5_onyx.auth for SPFT and it flashed. Now I'm sitting with boot problem as I wrote above. I understand that LSA uses firmware upgrade I did something similar, but more risky and came to similar result. You probably had an error when bypassing the lock - that's why it doesn't boot. Maybe formatting then download only via SPFT will help you too. But since formatting via SPFT is very dangerous, I would use this as a last resort if nothing else works. I don't know which translation. I use DeepL. Too bad my device won't boot. Eh, why can't I live in peace? )))

 

[vitiosing]

Open proinfo.bin in the data backed up with python mtk rl with HxD to see the serial number.
It is not known if this can be rewritten and used to change the serial number.

I don't know how to use python where can I read about it?

 

[daybreak7456]

Backup full firmware(ROM) of any MediaTek device using MTK client| Oppo reno6 5G | MT6877

Hello Guys, Many times we encounter a situation where we need to do some software update, flash custom ROM, install stock ROM etc, so it is advisable to take full firmware/ROM backup of your device. If required then you can flash this backup to...

forum.xda-developers.com

How to unlock Mediatek bootloader using mtkclient

This guide will explain how to unlock a Mediatek device's bootloader using MTKclient. This will come in handy for those who can't unlock bootloader using fastboot . This was tested on the LG K51 Warni

www.hovatek.com

Sorry, I don't really understand how to use it either.
When I unlocked the bootloader, I got a warning on power-up and could not proceed.
DA.bin may not be compatible.

I'll be quite late replying as I have work to do.

 

[reticuli]

This is one of the reasons why you always should choose Qualcomm chips instead of Mediatek, they are more restorable via edl-mode and solutions to solve problems like we have. Only solution is if/when we get a working CN firmware.

 

[jpvr]

new 3 dec 2022:

Roms, firmware and tooling..

Maybe new clues for technerds?

Lenovo TB-132FU (TB132FU) Firmware Stock ROM - ROM-Provider

Download Lenovo TB-132FU Firmware Flash File Stock ROM, the file can be used to fix hang on logo, bootloop & frp on Lenovo TB-132FU

romprovider.com

 

[vitiosing]

Hello! I was able to solve the problem with the backup write ban! Here are the screenshots. As you can see in one of the screenshots just create a scatter consisting of only two blocks preloader and user data format+download you sew. Then write protection is removed. I will let you know if the tablet is fully recovered.

 

[vitiosing]

The only problem is this. If you flash the tablets from my backup, we all have the same serial number - my serial number. This has to be solved or there could be problems...

 

[reticuli]

The only problem is this. If you flash the tablets from my backup, we all have the same serial number - my serial number. This has to be solved or there could be problems...

It seems that the serial can change when they install the custom global rom, look at picture what they write.