Teclast T30 T1P2 Root

[ilbarba]

I followed the guide and installed Havoc, I had problems rebooting and poor wifi signal.
On the advice of a user of a Spanish telegram group I installed the blissrom. In my opinion it is much better.

Inviato dal mio tb8788p1_64_bsp utilizzando Tapatalk

 

[gattone_16]

I followed the guide and installed Havoc, I had problems rebooting and poor wifi signal.
On the advice of a user of a Spanish telegram group I installed the blissrom. In my opinion it is much better.

Inviato dal mio tb8788p1_64_bsp utilizzando Tapatalk

hello where to find the rom you say
and always android 10?

 

[ilbarba77]

hello where to find the rom you say
and always android 10?

https://sourceforge.net/projects/treblerom/files/BLESS/2020.10.15/bless-v224-201015-arm64-bgN.img.xz/download

attention I have some reboots while browsing the web
It Is android 10
There is a telegram group of T30
Teclast T30

Teclast T30

You can view and join @teclast30 right away.

t.me

 

[benjibetanzorossel]

I made a standard installation file for firmware 1.05/1.04.

In the folder with firmware 1.05, I replaced the scatter file and system.img from firmware 1.04.
The result is firmware 1.04 with Google Play store and 60 Hz screen frequency, containing all languages.
The big advantage of this procedure is the standard easy installation of the firmware via Flashtool.

Download: https://uloz.to/file/zQDayfhw5LeW/t30-t1p2-android-9-0-row-v1-05-1-04-sz-1-0-rar

Installation:
- Unpack FlashTools, and Click on Flash_tool.exe
- Select "scatter-Loading" and search MT6771_Android_scatter.txt in ROM
- Wait file to be added into Flash Tool
- Select "Firmware upgrade"
- Turn off your tablet.
- Press “Download” button to start
- Connect your tablet into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles display
- Finish !

- You can now safely disconnect your tablet and turn it on.

I just want to say THANK YOU. I don't know if this is a placebo effect, but after flashing this, not only the screen refresh rate is right, but also the touch response is better. Maybe they are related, or it is just my idea. Now the tablet it's perfect except for the blinking led when charging, but that´s Ok because I have the case with cover so I don't see it. Unless there is a solution, I'm quite happy with the result. Again, thank you a lot.

 

[gattone_16]

https://sourceforge.net/projects/treblerom/files/BLESS/2020.10.15/bless-v224-201015-arm64-bgN.img.xz/download

attention I have some reboots while browsing the web
It Is android 10
There is a telegram group of T30
Teclast T30

Teclast T30

You can view and join @teclast30 right away.

t.me

For the moment thank you I try in case I give my opinion.

 

[rbt07]

I just want to say THANK YOU. I don't know if this is a placebo effect, but after flashing this, not only the screen refresh rate is right, but also the touch response is better. Maybe they are related, or it is just my idea. Now the tablet it's perfect except for the blinking led when charging, but that´s Ok because I have the case with cover so I don't see it. Unless there is a solution, I'm quite happy with the result. Again, thank you a lot.

I also feel that in addition to the refresh rate, touch also works better. I'm glad that my ROM works well for you.


I have prepared a three versions of the hybrid ROM 1.04 / 1.05:

Download:
Version 1.0 - Initial, first version (60Hz screen refresh rate), better touch response
Version 1.1 - version 1.0 plus pre-installed Magisk (Root)
Version 1.2 - version 1.1 plus pre-installed TWRP

Installation 1.0 and 1.1:
- Unpack FlashTools, and Click on Flash_tool.exe
- Select "scatter-Loading" and search MT6771_Android_scatter.txt in ROM
- Wait file to be added into Flash Tool
- Select "Firmware upgrade"
- Turn off your tablet.
- Press “Download” button to start
- Connect your tablet into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles display
- Finish !
- Reboot System
- Install Magisk Manager v7.5.1 or Magisk Manager v8.0.3

Installation 1.2:
- Unpack FlashTools, and Click on Flash_tool.exe
- Select "scatter-Loading" and search MT6771_Android_scatter.txt in ROM
- Wait file to be added into Flash Tool
- Select "Firmware upgrade"
- Turn off your tablet.
- Press “Download” button to start
- Connect your tablet into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles display
- Finish
- Do not start tablet by normal way!!!
- To go to TWRP start the tablet by pressing and holding the Power and Vol+ buttons simultaneously, until text menu on tablet will appears
- On the tablet screen, use Vol+ to select "Recovery Mode", confirm the selection with the Vol-
- To control the TWRP connect the mouse to the tablet, because touch do not work in TWRP
- Click Cancel when prompted for a password
- Click on Wipe / Format Data Swipe to confirm
-Click Reboot system
- Install Magisk Manager v7.5.1 or Magisk Manager v8.0.3

 

[ilbarba77]

I also feel that in addition to the refresh rate, touch also works better. I'm glad that my ROM works well for you.


I have prepared a new version 1.1 of the hybrid ROM 1.04 / 1.05 - There is Magisk preinstalled.

Download:
Version 1.0 - Initial, first version (60Hz screen refresh rate)
Version 1.1 - Added pre-installed Magisk (Root)

Hi, does it work with all versions ? I have t1p4

 

[data123a]

Hi, does it work with all versions ? I have t1p4

I installed Version 1.0 on my t1p4 & it works fine

 

[gattone_16]

i installed the 1.1 but did not have the magisk installed
i 60hz 1.1 does not have them?

 

[rbt07]

i installed the 1.1 but did not have the magisk installed
i 60hz 1.1 does not have them?

Magisk is pre-installed, but you have to install Magisk manager to see options.
there is link in instructions (last point), or use this: Magisk Manager v8.0.3

Version 1.1 = version 1.0 + Magisk.

 

[rbt07]

Hi, does it work with all versions ? I have t1p4

It works well for versions: T1P2, T1P3, T1P4.
Me personally have T1P4.

 

[rbt07]

deleted duplicate post

 

[ilbarba77]

It works well for versions: T1P2, T1P3, T1P4.
Me personally have T1P4.

Installed the v. 1.1, I have magisk and 60hz.
I'm on T1P4.
Thanks.

 

[juansan10]

Hello everyone,

What rom do you recommend for the Teclast T30, I have used the Havoc OS and it works quite well but when I browse the internet with Google Chrome or any browser, I suffer reboots on the tablet.
How's the Blissrom going? Does everything work fine or does it also suffer from sporadic reboots and is another rom better?

I currently installed the official v. 1.04 ROW

Health

 

[juansan10]

.

 

[juansan10]

He preparado una nueva versión 1.1 de la ROM híbrida 1.04 / 1.05 - Magisk está preinstalado.

Descargar:
Versión 1.0: inicial, primera versión (frecuencia de actualización de pantalla de 60 Hz)
Versión 1.1 - versión 1.0 más Magisk preinstalado (raíz)

Instalación:
- Desempaquete FlashTools y haga clic en Flash_tool.exe
- Seleccione "Scatter-Loading" y busque MT6771_Android_scatter.txt en la ROM
- Espere a que el archivo se agregue a la herramienta Flash
- Seleccione "Actualización de firmware"
- Apague su tableta.
- Presione el botón "Descargar" para comenzar
- Conecte su tableta a la computadora mediante un cable de datos USB.
- El proceso comenzará y aparecerá una barra de progreso roja después del color púrpura, amarillo.
- Y pantalla de círculos verdes
- ¡Terminar!
- Reiniciar el sistema
- Instale Magisk Manager v8.0.3


Does everything work fine in this rom?

Health

 

[rbt07]

He preparado una nueva versión 1.1 de la ROM híbrida 1.04 / 1.05 - Magisk está preinstalado.

Descargar:
Versión 1.0: inicial, primera versión (frecuencia de actualización de pantalla de 60 Hz)
Versión 1.1 - versión 1.0 más Magisk preinstalado (raíz)

Instalación:
- Desempaquete FlashTools y haga clic en Flash_tool.exe
- Seleccione "Scatter-Loading" y busque MT6771_Android_scatter.txt en la ROM
- Espere a que el archivo se agregue a la herramienta Flash
- Seleccione "Actualización de firmware"
- Apague su tableta.
- Presione el botón "Descargar" para comenzar
- Conecte su tableta a la computadora mediante un cable de datos USB.
- El proceso comenzará y aparecerá una barra de progreso roja después del color púrpura, amarillo.
- Y pantalla de círculos verdes
- ¡Terminar!
- Reiniciar el sistema
- Instale Magisk Manager v8.0.3


Funciona todo bien en esta rom?

Saludos

Yes, everything works great.

 

[juansan10]

[QUOTE = "rbt07, publicación: 84063443, miembro: 4818077"]
Sí, todo funciona muy bien.

Este foro está en inglés. Por lo tanto, no use otro idioma.
[/ CITAR]

ah ok, thank you very much and excuse me

 

[rbt07]

for me English is also not my native language ...

 

[rbt07]

Hello everyone,

What rom do you recommend for the Teclast T30, I have used the Havoc OS and it works quite well but when I browse the internet with Google Chrome or any browser, I suffer reboots on the tablet.
How's the Blissrom going? Does everything work fine or does it also suffer from sporadic reboots and is another rom better?

I currently installed the official v. 1.04 ROW

Health

Yes, there are occasional restarts in HavocOS. But it's not very often.

If you are on official 1.04 ROW, try my Hybrid ROM 1.04/1.05. Its better, more here:
https://xdaforums.com/t/teclast-t30-t1p2-root.4001731/page-23#post-84038793