Temperature at the front Display for All TVboxes with ports 0.4.# and 0.5.#

[ath156]

Temperature at the front Display for all TVboxes with ugoos ports 0.4.# to 0.5.#

If you have any TVbox with an Ugoos port of 0.4.# to 0.5.# you can have the Temperature at the front Display Continously !!
All you have to do is install the following "zip" file through the stock Recovery or through TWRP. Reboot after this to enable it.

For example through the stock Recovery usning an sd card or USB memory stick:

- Install apk "Terminal Emulator". In it type "reboot update". When the stock recovery starts, choose option "install from ext" and find the zip file in sd card or USB memory stick.
Instead of the above you can simply remove power adapter, press the reset button and connect the power again.
Reboot. The temperature will start displaying about 30 seconds after the boot process.

 

[ath156]

I give also a link to my 1st post about how to control the front display and what is displayed upon it. This needs more steps and manipulations, but it gives you Full control of what and how is displayed there. The disandvantage being that you must always have a version of KODI or fork of it running at the background..... https://xdaforums.com/t/temperature...s-ports-0-4-0-to-0-4-2.4387209/#post-86243563